D-side: A facility and workforce planning group multi-criteria decision support system for Johnson Space Center

“To understand and protect our home planet, to explore the universe and search for life, and to inspire the next generation of explorers” is NASA's mission. The Systems Management Office at Johnson Space Center (JSC) is searching for methods to effectively manage the Center's resources to meet NASA's mission. D-Side is a group multi-criteria decision support system (GMDSS) developed to support facility decisions at JSC. D-Side uses a series of sequential and structured processes to plot facilities in a three-dimensional (3-D) graph on the basis of each facility's alignment with NASA's mission and goals, the extent to which other facilities are dependent on the facility, and the dollar value of capital investments that have been postponed at the facility relative to the facility's replacement value. A similarity factor rank orders facilities based on their Euclidean distance from Ideal and Nadir points. These similarity factors are then used to allocate capital improvement resources across facilities. We also present a parallel model that can be used to support decisions concerning allocation of human resources investments across workforce units. Finally, we present results from a pilot study where 12 experienced facility managers from NASA used D-Side and the organization's current approach to rank order and allocate funds for capital improvement across 20 facilities. Users evaluated D-Side favorably in terms of ease of use, the quality of the decision-making process, decision quality, and overall value-added. Their evaluations of D-Side were significantly more favorable than their evaluations of the current approach.     

Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation

Structural and Multidisciplinary Optimization - A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on...     

A new algorithm for modeling online search behavior and studying ranking reliability variations

We design an information retrieval algorithm that mimics the stochastic behavior of decision-makers (DMs) when evaluating the alternatives displayed by an online search engine. The algorithm consists of a decision tree that incorporates all the 1024 decision nodes that may arise from the information retrieval process of DMs. We calibrate the behavior of the algorithm to the one observed from online users and run several sets of 1,000,000 queries. Each query lets DMs decide which subset of the ten alternatives composing the initial page of results to click, allowing us to evaluate their behavior as ranking reliability is assumed to decrease when DMs decide not to click on an alternative. We compare the click-through rates (CTRs) obtained when modifying the degree of ranking reliability derived from the alternatives displayed on the first page of search results. We illustrate how the stability of the CTR prevails among the top-ranked alternatives within relatively reliable scenarios while it drops when imposing large initial decrements in reliability. The resulting consequences regarding the importance of relative ranking positions are analyzed, the top three alternatives exhibiting a generally contained decrease in their CTRs that contrasts with the cumulative pattern arising from the fourth position onwards.

     

Bending-stretching analysis of thick functionally graded micro-plates using higher-order shear and normal deformable plate theory

In the present article, higher-order shear and normal deformable plate theory together with modified couple stress theory are developed to study the bending analysis of thick functionally graded rectangular micro-plates. One material length scale parameter is used for capturing the size effects. Utilizing the variational approach and also a principle of virtual displacement, a new form of equilibrium equations and the corresponding boundary conditions are derived. It is assumed that material properties vary through the thickness according to the power law function. Finally, an analytical solution for the bending problem of a simply supported FG rectangular micro-plate is presented.     

A robust optimization approach for imprecise data envelopment analysis

Crisp input and output data are fundamentally indispensable in traditional data envelopment analysis (DEA). However, the input and output data in real-world problems are often imprecise or ambiguous. Some researchers have proposed interval DEA (IDEA) and fuzzy DEA (FDEA) to deal with imprecise and ambiguous data in DEA. Nevertheless, many real-life problems use linguistic data that cannot be used as interval data and a large number of input variables in fuzzy logic could result in a significant number of rules that are needed to specify a dynamic model. In this paper, we propose an adaptation of the standard DEA under conditions of uncertainty. The proposed approach is based on a robust optimization model in which the input and output parameters are constrained to be within an uncertainty set with additional constraints based on the worst case solution with respect to the uncertainty set. Our robust DEA (RDEA) model seeks to maximize efficiency (similar to standard DEA) but under the assumption of a worst case efficiency defied by the uncertainty set and it’s supporting constraint. A Monte-Carlo simulation is used to compute the conformity of the rankings in the RDEA model. The contribution of this paper is fourfold: (1) we consider ambiguous, uncertain and imprecise input and output data in DEA; (2) we address the gap in the imprecise DEA literature for problems not suitable or difficult to model with interval or fuzzy representations; (3) we propose a robust optimization model in which the input and output parameters are constrained to be within an uncertainty set with additional constraints based on the worst case solution with respect to the uncertainty set; and (4) we use Monte-Carlo simulation to specify a range of Gamma in which the rankings of the DMUs occur with high probability.     

Overaluminizing of a CoNiCrAlY Coating by Inward and Outward Diffusion Treatments

Overaluminizing is a commercially accepted treatment to enhance high temperature oxidation resistance of MCrAlY overlay coatings. In the current investigation, a low pressure plasma-sprayed CoNiCrAlY coating was aluminized by two different growth modes: outward growth and inward growth. The resultant microstructures were characterized by means of scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction analysis. The results showed that the final microstructure of both types of overaluminized coatings was similar and included Al-rich NiAl and Ni-rich NiAl zones from the top to the bottom. The details of the microstructures are discussed and compared with the results of simple aluminizing of the nickel-based substrate.     

Effect of plate-like glass fillers on the mechanical properties of dental nanocomposites

In this study, glass flakes were incorporated into the spherical nanosilica component of the dental composites and its effect on the mechanical properties of these composites was investigated. To achieve a good interfacial adhesion between matrix resin and fillers, the particles were surface treated with a silane coupling agent (γ-MPS). Composites with different plate-like and spherical nanoparticle contents were prepared and their mechanical properties, including flexural strength, flexural modulus and fracture toughness were measured. The morphology of the particles and fracture surface of the composites were studied by SEM. The distribution of the flakes in the composite was also monitored using EDXA. Statistical analysis of the data was performed with ANOVA and the Tukey’s post hoc test was at a significance level of 0.05. The results showed that the flexural modulus and fracture toughness of specimens were improved with increasing the glass flake content up to 15 vol % which then declined upon further increase due to the stacking of the flakes on each other. A good interfacial adhesion was observed between matrix resin and particles in the SEM micrographs. The results of this study suggest that incorporation of glass flakes into the dental composites containing spherical nanosilica particles may enhance their mechanical properties.