Simultaneous measurement of gas hold-up and mass transfer coefficient by tracer dynamic technique in “Emulsair” reactor with an emulsion-venturi distributor

Hydrodynamics and gas-liquid mass transfer have been investigated in an “Emulsair” reactor with cocurrent downflow of gas and liquid. This consists of a cylindrical tank with conical bottom topped by an emulsion-venturi as the gas-liquid distributor in which the gas is self-aspired by action of the kinetic energy of the liquid recirculation. An original tracer dynamic technique using the CO₂-N₂/water system that enables the simultaneous measurement of overall gas hold-up and overall volumetric mass transfer coefficient has been developed and validated using conventional techniques, such as volume expansion for gas hold-up and dynamic oxygenation for mass transfer. It has been shown that gas hold-up and K_La_L can be deduced from the moments of experimental response curves using a CO₂ pulse in the gas feed. Experimental results have proved that hydrodynamics and mass transfer in the Emulsair reactor are strongly influenced by the flow regime in the divergent. Two different regimes have been observed depending on the liquid recirculation flow rate: annular and homogeneous bubbling flows. In both regimes, self-aspired gas flow rate, gas hold-up and K_La_L have been reported to increase with the liquid flow rate. The operation effectiveness, estimated from the gas-to-liquid flow rate ratio, has been shown to pass through a maximum around 0.59 as a function of liquid recirculation. A comparison with the literature proved that this maximum is higher than those observed for other kinds of gas-liquid reactors equipped with a venturi. Correlations for mass transfer estimation have been derived and are in agreement with the literature.     

Study of Hydrodynamics,Mixing and Gas‐Liquid Mass Transfer in a Split‐Rectangular Airlift Reactor

Global hydrodynamic characteristics, liquid mixing and gas‐liquid mass transfer for a 63 L split‐rectangular airlift reactor were studied. Correlations for gas holdup and overall liquid circulation velocity were derived for the air‐water system as a function of the specific power input; these were compared to data and correlations for reactor volumes between 4.7 L and 4600 L. A partial recirculation of small bubbles in the riser was observed when U_gr > 0.03 m/s, which was attributed to the use of a single‐orifice nozzle as the gas phase distributor. The dimensionless mixing time and the overall axial dispersion coefficient were nearly constant for the range of gas flow rates studied. However, values of K_L/d_B were greater than those reported in previous studies and this is caused by the partial recirculation of the gas phase in the riser. While scale effects remain slight, the use of a gas distributor favouring this partial recirculation seems adequate for mass transfer in split‐rectangular airlift reactors.     

New synthesis method of HA/P(D,L)LA composites: study of fibronectin adsorption and their effects in osteoblastic behavior for bone tissue engineering

A novel synthetic method to synthesize hydroxyapatite/poly (D,L) lactic acid biocomposite is presented in this study by mixing only the precursors hydroxyapatite and (D,L) LA monomer without adding neither solvent nor catalyst. Three compositions were successfully synthesized with the weight ratios of 1/1, 1/3, and 3/5 (hydroxyapatite/(D,L) lactic acid), and the grafting efficiency of poly (D,L) lactic acid on hydroxyapatite surface reaches up to 84?%. Scanning electron microscopy and Fourier transform infrared spectroscopy showed that the hydroxyapatite particles were successfully incorporated into the poly (D,L) lactic acid polymer and X ray diffraction analysis showed that hydroxyapatite preserved its crystallinity after poly (D,L) lactic acid grafting. Differential scanning calorimetry shows that Tg of hydroxyapatite/poly (D,L) lactic acid composite is less than Tg of pure poly (D,L) lactic acid, which facilitates the shaping of the composite obtained. The addition of poly (D,L) lactic acid improves the adsorption properties of hydroxyapatite for fibronectin extracellular matrix protein. Furthermore, the presence of poly (D,L) lactic acid on hydroxyapatite surface coated with fibronectin enhanced pre-osteoblast STRO-1 adhesion and cell spreading. These results show the promising potential of hydroxyapatite/poly (D,L) lactic acid composite as a bone substitute material for orthopedic applications and bone tissue engineering.     

Solubility Enhancement of Fe in ZnO Nanoparticles Prepared by Co-Precipitation Method

Journal of Superconductivity and Novel Magnetism - Crystalline ZnO offers an excellent host matrix to create a dilute magnetic semiconductor (DMS) owing to its facile Zn-atom substitution with the...     

Impact of Coronavirus Pandemic Crisis on Technologies and Cloud Computing Applications

In light of the coronavirus disease 2019 (COVID-19) outbreak caused by the novel coronavirus, companies and institutions have instructed their employees to work from home as a precautionary measure to reduce the risk of contagion. Employees, however, have been exposed to different security risks because of working from home. Moreover, the rapid global spread of COVID-19 has increased the volume of data generated from various sources. Working from home depends mainly on cloud computing (CC) applications that help employees to efficiently accomplish their tasks. The cloud computing environment (CCE) is an unsung hero in the COVID-19 pandemic crisis. It consists of the fast-paced practices for services that reflect the trend of rapidly deployable applications for maintaining data. Despite the increase in the use of CC applications, there is an ongoing research challenge in the domains of CCE concerning data, guaranteeing security, and the availability of CC applications. This paper, to the best of our knowledge, is the first paper that thoroughly explains the impact of the COVID-19 pandemic on CCE. Additionally, this paper also highlights the security risks of working from home during the COVID-19 pandemic.     

Photovoltaic-powered piston-type water pump controlled by a linear motor

This paper presents a unique technique to control a photovoltaic (PV)-powered piston-type water pump. the method uses a linear motor mounted directly onto the piston rod of the pump. This linear motor method replaces the traditional piston-type water pump, which employs a DC motor with a bulky gear mechanism to convert the rotational motion of the motor to linear motion for the piston. The electric circuit used to control the linear motor employs a four-quadrant chopper, which uses four fast MOSFETs and a simple logic circuit for the switching. The experimental results show that the PV-powered linear motor system can be used as an alternative to the PV-powered DC motor gear system.     

Digestibility and allergenicity of β-lactoglobulin following laccase-mediated cross-linking in the presence of sour cherry phenolics

β-Lactoglobulin (BLG) is an important nutrient of dairy products, but it represents a serious health risk in patients allergic to milk. Sour cherry (Prunus cerasus L.) extract (SCE) is frequently added as a natural food colour in composite foods, such as fruit yogurt, ice creams, frappés and milkshakes. The aim of this study was to investigate the potential of laccase to cross-link BLG in the presence of an SCE and to characterise the obtained products for their bioactivity.     

Optimizing Approach of Water Allocation to Off-Takes During Reduced Flows

Multi-objective optimization models with an index were developed based on farmers’ preferences, local requirements, supplies available at the head of the canal, system losses, crop demand about different growth stages, and field soil moisture balance. The models were applied using linear programming. The Model 1 determines the cropping pattern by maximizing net economic benefits using a monthly basis lumped volume available at the head of the canal and is set to the minimum and maximum area constraints along with the constraint of minimum main crop area. The areas for different crops given by the first model form input for the Model 2. The other inputs of Model 2 included periodic supply available at the head of the primary canal (7-day period in this study), root growth depth, demand, and soil moisture constants. The Model 2 optimizes the sum of relative yields of all the crops and provide the irrigation levels of various crops for specified periods. Finally, the distributed area and irrigation levels determined by Model 2 are used in conjunction with the losses to decide flow rates of off takes. The complete program was implemented in the West branch irrigated area of Mirpurkhas subdivision. The results showed that the resources were allocated to off-takes in a competitive and conflict-free manner.

     

Influence of Alumina-Supported M–Pt Catalysts in DeNOx Reactions with M = Pd or Ir or Ru

To better understand N₂ formation in the selective catalytic reduction of NO _x by propene under oxidative atmosphere, we studied the catalytic behavior of bimetallics. Surface segregation phenomena may provoke geometric and electronic modifications of the catalytic active sites. To explain our results we invoked: (i) the facile way to oxidize the bimetallic aggregates, (ii) the presence of atoms with low coordination number able to be oxidized first and (iii) an eventual formation of like vic-diNO _x species on such bimetallics leading to N₂ formation.