Design of Polarization-independent Wavelength-interleave Coupler in Fluorinated Polyimide Waveguide

Based on the measurement of dispersion characteristic and birefractive index of the fluorinated polyimide film,a statistical optimum design method is proposed and used to realize the design of 32-and 36-wavelengths optical waveguide wavelength-interleave coupler (i,e.,interleaver) with the optimization of polarization fluctuation and wavelength interval of 0.8nm at 1550nm. The largest cross coupling ratios of the two interleavers are respectively less than 1.8% and 3.5%, while the least through coupling ratios are respectively greater than 98. 2% and 96. 5%. The output differences due to polarization fluctuation are less than 1.7% and 3.2%     

The small GTP-binding protein Rho1 is a multifunctional protein that regulates actin localization, cell polarity, and septum formation in the fission yeast Schizosaccharomyces pombe

BACKGROUND: The small GTP-binding protein Rho has been shown to regulate the formation of the actin cytoskeleton in animal cells. We have previously isolated two rho genes, rho1+ and rho2+, from the fission yeast Schizosaccharomyces pombe in order to investigate the function of Rho using genetic techniques. In this paper, we report the cellular function of Rho1. RESULTS: We found that Rho1 is essential for cell viability and cell polarity using gene disruption and by exogenous expression of botulinum C3 ADP-ribosyltransferase. In cells expressing either a constitutively active Rho1 or a dominant-negative Rho1, actin patches were delocalized. Both the cell wall and secondary septum were thick and stratified in cells expressing the constitutively active Rho1, while the cell wall of cells expressing the dominant-negative Rho1 seemed to be loosely organized. Furthermore, inactivation of Rho1 is apparently required for the separation of daughter cells. Cell fractionation studies suggested that Rho1 is predominantly membrane-bound. Moreover, we observed that Rho1 is localized to the cell periphery and to the septum. CONCLUSIONS: Rho1 is involved in actin patch localization, the control of cell polarity, the regulation of septation, and cell wall synthesis.     

Preparation and Luminescence Spectra of Calcium- and Rare-Earth (R = Eu, Tb, and Pr)-Codoped α-SiAlON Ceramics

Rare-earth-doped oxynitride or nitride compounds have been reported to be luminescent and may then serve as new phosphors with good thermal and chemical stabilities. In this work, we report the photoluminescence (PL) spectra of europium-, terbium-, and praseodymium-doped Ca-α-SiAlON ceramics. The highly dense ceramics were prepared by hot pressing at 1750°C for 1 h under 20 MPa in a nitrogen atmosphere. Europium-doped Ca-α-SiAlON displayed a single broad emission band peaking at λ= 550–590 nm depending on the europium concentration. The emission bands in the spectra of europium-doped Ca-α-SiAlONs were assigned to the allowed transition of Eu²⁺ from the lowest crystal field component of 4 f ⁶5 d to ⁸S_7/2 (4 f ⁷) ground-state level. The emission spectra of terbium- and praseodymium-doped Ca-α-SiAlON ceramics both consisted of several sharp lines, which were attributed to the ⁵D₄→⁷F _j ( j = 3, 4, 5, 6) transitions of Tb³⁺ and ³P₀→³H _j ( j = 3, 4, 5) transitions of Pr³⁺, respectively. In particular, the terbium-doped α-SiAlON ceramics showed a strong green emission among these phosphors.     

Dissolution of phase-separated domains after a jump to a temperature in the single-phase region

Phase-separated domains prepared in the two-phase region were dissolved at a temperature in the single-phase region, and their dissolution dynamics was studied by using the time-resolved light scattering (TRLS) technique and a scanning electron microscope (SEM). The time t_ps of preparation of domains was chosen to be long enough for phase separation to proceed into the late stage. The scattered light intensity at small wavenumbers increased before it attenuated. As t_ps increased, the increase at smaller wavenumbers became more significant and the peak intensity decreased only slightly with dissolution time. The characteristic wavenumber q_m evaluated from TRLS and SEM followed the power-law relation q_mt^−0.3.     

Synthesis of polymeric microspheres employing SPG emulsification technique

Relatively uniform polymeric microspheres, the coefficients of variation being close to 10%, were obtained by the BPO-initiated suspension polymerization of styrenic monomers. Unlike the conventional stirred-tank system, a particular microporous glass membrane (SPG) provided uniform monomer droplets continuously when monomer was allowed to permeate through the micropores. The monomer droplets were suspended in an aqueous solution containing the stabilizing agents, transferred to a stirred vessel, and polymerized. Up to 10μm spheres, of a far narrower size distribution than those obtained by conventional microsuspension polymerization spheres, were obtained. The initial droplet size and distribution were retained with the successful suppression of secondary particle nucleation by the addition of hydroquinone in the aueous phase. Crosslinked polystyrene spheres were also synthesized in the presence of various low-molecular-weight diluents. While a good solvent, toluene, was not so effective; poor solvents, n-heptane and n-heptane, easily yielded the microporous structure, the specific surface area being as high as 160 m²/g. © 1994 John Wiley & Sons, Inc.     

Analysis of amyloid deposition in a transgenic mouse model of homozygous familial amyloidotic polyneuropathy

Amyloid fibrils derived from the Japanese, Portuguese, and Swedish types of familial amyloidotic polyneuropathy all consist of a variant transthyretin (TTR) with a substitution of methionine for valine at position 30 (TTR Met 30). In an attempt to establish an animal model of TTR Met-30-associated homozygous familial amyloidotic polyneuropathy and to study the structural and functional properties of human TTR Met 30, we generated a mouse line carrying a null mutation at the endogenous ttr locus (ttr-/-) and the human mutant ttr gene (6.0-hMet 30) as a transgene. In these mice, human TTR Met-30-derived amyloid deposits were first observed in the esophagus and stomach when the mice were 11 months of age. With advancing age, amyloid deposits extended to various other tissues. Because no significant difference was detected in the onset, progression, and tissue distribution of amyloid deposition between the ttr-/- and ttr+/+ transgenic mice expressing 6.0-hMet 30, endogenous normal mouse TTR probably does not affect the deposition of human TTR Met-30-derived amyloid in mice. TTR is a tetramer composed of four identical subunits that binds thyroxine (T4) and plasma retinol-binding protein. The introduction of 6.0-hMet 30 into the ttr-/- mice significantly increased their depressed serum levels of T4 and retinol-binding protein, suggesting that human TTR Met 30 binds T4 and retinol-binding protein in vivo. The T4-binding ability of human TTR Met 30 was confirmed by the analysis of T4-binding proteins in the sera of ttr-/- transgenic mice expressing 6.0-hMet 30. The T4-binding studies also demonstrated the presence of hybrid tetramers between mouse and human TTR subunits in the ttr+/+ transgenic mice expressing 6.0-hMet 30.     

Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

Localization of Rho GTPase in sea urchin eggs

OBJECTIVE: Previous studies in our laboratory showed that the platelet anti-aggregating effect exerted by insulin, mediated by a nitric oxide (NO)-induced increase of guanosine-3',5'-cyclic monophosphate (cGMP), is lost in the insulin-resistant of obesity and obese NIDDM. It is not clear 1) whether the alterations observed in obese NIDDM patients are attributable to the obesity-related insulin resistance or to diabetes per se and 2) whether insulin-resistant states present a normal or a blunted response to NO. This study has been conducted to investigate 1) the platelet sensitivity to insulin in lean NIDDM and 2) the platelet sensitivity to an NO donor, glyceryl trinitrate (GTN), in obesity and in both lean and obese NIDDM. RESEARCH DESIGN AND METHODS: We determined 1) ADP-induced platelet aggregation and platelet cGMP content in platelet-rich plasma (PRP) obtained from 11 lean NIDDM patients, after a 3-min incubation with insulin (0, 240, 480, 960, 1,920 pmol/l) and 2) ADP-induced platelet aggregation and platelet cGMP content in PRP obtained from 9 obese subjects, 11 lean and 8 obese NIDDM patients, and 18 control subjects, after a 3-min incubation with 0, 20, 40, and 100 mumol/l GTN. RESULTS: Insulin dose-dependently decreased platelet aggregation in lean NIDDM patients (P = 0.0001): with 1,920 pmol/l of insulin, ADP ED50 was 141.5 +/- 6.4% of basal values (P = 0.0001). Furthermore, insulin increased platelet cGMP (P = 0.0001) from 7.5 +/- 0.2 to 21.1 +/- 3.7 pmol/10(9) platelets. These results were similar to those previously described in healthy subjects. GTN reduced platelet aggregation in all the groups (P = 0.0001) at all the concentrations tested (P = 0.0001), but GTN IC50 values were much higher in insulin-resistant patients: 36.3 +/- 5.0 mumol/l in healthy control subjects, 26.0 +/- 6.0 mumol/l in lean NIDDM patients (NS vs. control subjects), 123.6 +/- 24.0 mumol/l in obese subjects (P = 0.0001 vs. control subjects), and 110.1 +/- 19.2 mumol/l in obese NIDDM patients (P = 0.0001 vs. control subjects). GTN dose-dependently increased platelet cGMP in all the groups (P = 0.0001 in control subjects, lean NIDDM patients, and obese subjects; P = 0.04 in obese NIDDM patients). Values reached by obese subjects and obese NIDDM patients, however, were lower than those reached by control subjects (with 100 mumol/l of GTN, P = 0.001 and P = 0.0001, respectively). In healthy control subjects and in obese subjects, the insulin:glucose ratio, used as an indirect measure of insulin sensitivity, was positively correlated to GTN IC50 (r = 0.530, P = 0.008), further suggesting that the sensitivity to NO is reduced in the presence of insulin resistance. CONCLUSIONS: The insulin anti-aggregating effect is preserved in lean NIDDM; platelet sensitivity to GTN in preserved in lean NIDDM but is reduced in the insulin-resistant states of obesity and obese NIDDM. Resistance to nitrates, therefore, could be considered another feature of the insulin-resistance syndrome.     

Activation energy for superplastic flow in aluminum matrix composites exhibiting high-strain-rate superplasticity

The activation energy for superplastic flow in a variety of Si₃N₄/Al composites exhibiting high-strain-rate superplasticity was analyzed. The activation energy in a solid state including no liquid was in agreement with the one for lattice self-diffusion. However, the activation energy was increased by the presence of a liquid phase. The behaviors of the Al-Cu-Mg(2124) alloy composites were different from those of the Al-Mg(5052), AI-Mg-Si(6061) and Al-Zn-Mg(7064) alloy composites. This is probably because partial melting occurred at a temperature lower than the apparent partial melting temperature determined by the DSC investigation, however, the volume of liquid was too small to be measured by the DSC investigations for the Al-Cu-Mg composites.