The combined use of ultrasound and densitometry in the prediction of vertebral fracture

Measurement of ultrasonographic parameters provides information concerning not only bone density but also bone architecture. We investigated the usefulness of ultrasonographic parameters and bone mineral density for evaluating the probability of vertebral fracture. 397 postmenopausal women (59.1 +/- 6.0 years) with (n = 178) or without (n = 219) atraumatic vertebral fractures were studied. In all women, bone mineral density (BMD) of the lumbar spine was evaluated by dual X-ray absorptiometry (DXA) and speed of sound (SOS); broadband ultrasound attenuation (BUA) and Stiffness in the calcaneus were evaluated by an Achilles unit (Lunar Corporation). Ultrasonographic parameters and BMD were compared by examining the magnitude of the odds ratios, to determine which produces the highest estimate of the probability of odds of fracture, and by examining widths of the respective confidence intervals (CI) to show which estimate of odd ratio is the most precise. The relative risk of vertebral fracture, after adjusting for potential confounders, was 3.5 (CI 2.6-4.8) for BUA; 4.5 (CI 3.2-6.2) for SOS; 5.8 (CI 4.0-8.4) for Stiffness and 7.5 (CI 4.8-11.5) for BMD. Ultrasound (US) parameters were still significant independent predictors of vertebral fracture, even after adjusting for BMD. The relative risk of fracture for a simultaneous decrease by 1 SD of BMD and by 1 SD of each ultrasound parameter was 17.3 (CI 9.4-39.6) for BMD and SOS; 18.3 (CI 8.4-30.6) for BMD and BUA and 22.1 (CI 8.9-52.7) for BMD and Stiffness. Our data suggest that US and BMD provide complementary information which can be combined to improve estimates of vertebral fracture risk.     

Effects of lubrication and humidity on the abrasiveness of a thin boron carbide coating

Studies using thin boron carbide (B₄C) coatings have previously been performed in order to investigate their potential use as finite-life run-in coatings. Such coatings have been shown to polish the mating surface in a relatively short time. The inherent ability of these coatings to polish can potentially allow them to function as finite-life run-in coatings. Employing such coatings requires a thorough understanding of the parameters which directly influence the changes that occur in the coating abrasiveness throughout the duration of the polishing process. In past studies, changes in the coating abrasiveness during dry sliding wear under ambient conditions have been investigated. However, both lubrication and humidity can strongly influence the abrasive wear process. In this study, the influences of the operating environment, namely humidity and lubrication, on the coating abrasiveness are directly investigated. The coating abrasiveness decreases at a slower rate when a lubricant is added and when the humidity decreases.     

Distinct Tomato Cultivars Are Characterized by a Differential Pattern of Biochemical Responses to Drought Stress

Future climate scenarios suggest that crop plants will experience environmental changes capable of affecting their productivity. Among the most harmful environmental stresses is drought, defined as a total or partial lack of water availability. It is essential to study and understand both the damage caused by drought on crop plants and the mechanisms implemented to tolerate the stress. In this study, we focused on four cultivars of tomato, an economically important crop in the Mediterranean basin. We investigated the biochemical mechanisms of plant defense against drought by focusing on proteins specifically involved in this stress, such as osmotin, dehydrin, and aquaporin, and on proteins involved in the general stress response, such as HSP70 and cyclophilins. Since sugars are also known to act as osmoprotectants in plant cells, proteins involved in sugar metabolism (such as RuBisCO and sucrose synthase) were also analyzed. The results show crucial differences in biochemical behavior among the selected cultivars and highlight that the most tolerant tomato cultivars adopt quite specific biochemical strategies such as different accumulations of aquaporins and osmotins. The data set also suggests that RuBisCO isoforms and aquaporins can be used as markers of tolerance/susceptibility to drought stress and be used to select tomato cultivars within breeding programs.     

Hypercholesterolemia in Cancer and in Anorexia Nervosa: A Hypothesis for a Crosstalk

The relationship between cholesterol and cancer has been widely demonstrated. Clinical studies have shown changes in blood cholesterol levels in cancer patients. In parallel, basic research studies have shown that cholesterol is involved in the mechanisms of onset and progression of the disease. On the other hand, anorexic patients have high cholesterol levels and a high susceptibility to cancer. In this review, we first present a brief background on the relations among nutrition, eating disorders and cancer. Using several notable examples, we then illustrate the changes in cholesterol in cancer and in anorexia nervosa, providing evidence for their important relationship. Finally, we show a new possible link between cholesterol disorder in cancer and in anorexia nervosa.     

Engineered Sleeping Beauty Transposon as Efficient System to Optimize Chimp Adenoviral Production

Sleeping Beauty (SB) is the first DNA transposon employed for efficient transposition in vertebrate cells, opening new applications for genetic engineering and gene therapies. A transposon-based gene delivery system holds the favourable features of non-viral vectors and an attractive safety profile. Here, we employed SB to engineer HEK293 cells for optimizing the production of a chimpanzee Adenovector (chAd) belonging to the Human Mastadenovirus C species. To date, chAd vectors are employed in several clinical settings for infectious diseases, last but not least COVID-19. A robust, efficient and quick viral vector production could advance the clinical application of chAd vectors. To this aim, we firstly swapped the hAd5 E1 with chAd-C E1 gene by using the CRISPR/Cas9 system. We demonstrated that in the absence of human Ad5 E1, chimp Ad-C E1 gene did not support HEK293 survival. To improve chAd-C vector production, we engineered HEK293 cells to stably express the chAd-C precursor terminal protein (ch.pTP), which plays a crucial role in chimpanzee Adenoviral DNA replication. The results indicate that exogenous ch.pTP expression significantly ameliorate the packaging and amplification of recombinant chAd-C vectors thus, the engineered HEK293ch.pTP cells could represent a superior packaging cell line for the production of these vectors.     

Trastuzumab and Doxorubicin Sequential Administration Increases Oxidative Stress and Phosphorylation of Connexin 43 on Ser368

Human epidermal growth factor receptor-2 (HER2) is overexpressed in up to 30% of breast cancer cases, causing a more aggressive tumour growth and poor prognosis. Trastuzumab, the humanized antibody targeted to HER2, increased the life expectancy of patients, but severe cardiotoxicity emerged as a long-term adverse effect. Clinical evidence highlights that Trastuzumab-induced cardiotoxicity drastically increases in association with Doxorubicin; however, the exact mechanisms involved remain incompletely understood. In order to analyse the molecular mechanisms involved and the possible adaptative responses to Trastuzumab and Doxorubicin treatment, in this study, H9c2 cardiomyoblasts were used. Results showed that Trastuzumab and Doxorubicin sequential administration in cardiomyoblast increased cytosolic and mitochondrial ROS production, intracellular calcium dysregulation, mitochondrial membrane depolarization, and the consequent apoptosis, induced by both Trastuzumab and Doxorubicin alone. Furthermore, in these conditions, we observed increased levels of Connexin43 phosphorylated on Ser368 (pCx43). Since phosphorylation on Ser368 decreases gap junction intracellular communication, thus reducing the spread of death signals to adjacent cells, we hypothesized that the increase in pCx43 could be an adaptative response implemented by cells to defend neighbouring cells by Trastuzumab and Doxorubicin sequential administration. However, the other side of the coin is the resulting conduction abnormalities.     

A Novel Morphological Parameter Predicting Fibrotic Evolution in Myeloproliferative Neoplasms: New Evidence and Molecular Insights

Philadelphia-negative chronic myeloproliferative neoplasms (MPNs) represent a group of hematological disorders that are traditionally considered as indistinct slow progressing conditions; still, a subset of cases shows a rapid evolution towards myelofibrotic bone marrow failure. Specific abnormalities in the megakaryocyte lineage seem to play a central role in this evolution, especially in the bone marrow fibrosis but also in the induction of myeloproliferation. In this review, we analyze the current knowledge of prognostic factors of MPNs related to their evolution to myelofibrotic bone marrow failure. Moreover, we focused the role of the megakaryocytic lineage in the various stages of MPNs, with updated examples of MPNs in vitro and in vivo models and new therapeutic implications.     

Supplementation with SCFAs Re-Establishes Microbiota Composition and Attenuates Hyperalgesia and Pain in a Mouse Model of NTG-Induced Migraine

Migraine is a common brain-disorder that affects 15% of the population. Converging evidence shows that migraine is associated with gastrointestinal disorders. However, the mechanisms underlying the interaction between the gut and brain in patients with migraine are not clear. In this study, we evaluated the role of the short-chain fatty acids (SCFAs) as sodium propionate (SP) and sodium butyrate (SB) on microbiota profile and intestinal permeability in a mouse model of migraine induced by nitroglycerine (NTG). The mice were orally administered SB and SP at the dose of 10, 30 and 100 mg/kg, 5 min after NTG intraperitoneal injections. Behavioral tests were used to evaluate migraine-like pain. Histological and molecular analyses were performed on the intestine. The composition of the intestinal microbiota was extracted from frozen fecal samples and sequenced with an Illumina MiSeq System. Our results demonstrated that the SP and SB treatments attenuated hyperalgesia and pain following NTG injection. Moreover, SP and SB reduced histological damage in the intestine and restored intestinal permeability and the intestinal microbiota profile. These results provide corroborating evidence that SB and SP exert a protective effect on central sensitization induced by NTG through a modulation of intestinal microbiota, suggesting the potential application of SCFAs as novel supportive therapies for intestinal disfunction associated with migraine.     

A hybrid finite-element-modal-expansion method with a new type of curvilinear mapping for the analysis of microwave passive devices

A hybrid finite-element-modal-expansion procedure for the three-dimensional analysis of passive microwave devices exploiting higher order vector basis functions and an innovative class of curved elements is presented. If modal expansions on ports are not analytically known, they can be numerically obtained via a preliminary two-and-one-half-dimensional finite-element analysis; curved triangular and tetrahedrical elements are defined by a rational Bezier mapping, which provides a remarkable increase in accuracy and flexibility over the conventional polynomial mapping without a significant increase in computational burden. Numerical results are provided to illustrate the efficiency and feasibility of the proposed technique.     

Sub-1 V band-gap based and MOS threshold-voltage based voltage references in 0.13 µm CMOS

Portable and implantable device applications require low supply voltage reference circuits due to increasing trend for lower power requirements. Voltage references have been proposed for operation below 1 V for CMOS and a comprehensive analysis of the behavior of the different topologies is needed for ultra-low power designs, in order to select the right circuit topology for a given requirement. This work compares two major classes of voltage reference topologies: threshold voltage (V_T0)-based and (V_G0) bandgap voltage-based reference circuits. Four different topologies of voltage-reference designs with 1-V supply were designed and fabricated in 130 nm CMOS process. Monte Carlo analysis shows the variability of the references and of their temperature coefficients (TC), and the results are compared to measured samples. Simulations and measurements show that the threshold voltage-based references are more susceptible to the variations in the CMOS fabrication process.