Schizorchis arfaai sp. n. (Cestoda: Anoplocephalidae) from the wood-mouse, Apodemus sylvaticus, in Caspian area of Iran

An artificial, slowly expanding mass which compressed the spinal cord produced histological, electrophysiological, and neurological changes. A comparison was made of the effects of laminectomy in the cat with dorsally and ventrally placed masses. Laminectomy reversed declining cord function and produced prompt recovery of somatosensory evoked potentials in cats with dorsally placed masses. In contrast, a worsening of these functions occurred following laminectomy in animals with ventrally placed masses. In all cases, evoked potential changes were consistent with neurological status and were predictive of the outcome of surgery.     

A heatline analysis of natural convection in a square inclined enclosure filled with a CuO nanofluid under non-uniform wall heating condition

Heatline visualization technique is used to understand heat transport path in an inclined non-uniformly heated enclosure filled with water based CuO nanofluid. The cavity has square cross-section and it is non-uniformly heated from a wall and cooled from opposite wall while other walls are adiabatic. The governing equations which are continuity, momentum and energy equations are solved using finite volume method. The dimensionless heatfunction for nanofluid heat flow is defined and solved to determine heatline patterns. Calculations were performed for Rayleigh numbers of 10³, 10⁴ and 10⁵, inclination angle of 0°, 30°, 60° and 90°, and nanoparticle fraction of 0, 0.02, 0.04, 0.06, 0.08 and 0.1. It is observed that heat transfer in the cavity increases by adding nanoparticles. The rate of increase is greater for the enclosures with low Rayleigh number. Visualization of heatline is successfully applied to nanoparticle convective flows. Based on the heatline patterns, three heat transfer regions are observed and discussed in details.     

A parametric study on isobaric adsorption process in a closed adsorbent bed

A numerical study on heat and mass transfer in an annular adsorbent bed filled with adsorbent granules for an isobaric adsorption process is performed. In order to reduce the number of independent parameters that influences heat and mass transfer in the bed, the governing equations and related initial and boundary conditions for the problem are non-dimensionalized and this yields two dimensionless parameters as G and Γ. The G dimensionless parameter is the ratio of heat of adsorption to sensible heat stored by adsorbent particle and Γ parameter compares mass diffusion within the adsorbent particle and heat diffusion in the radial direction of the adsorbent bed. The obtained results show that the total dimensionless time for an adsorption process can be reduced by increasing of Γ value. The total dimensionless time is independent from G for low values of Γ (i.e. Γ = 10^− 5). The results also show that the instantaneous equilibrium model can provide accurate results only for an adsorbent bed with a low value of Γ (i.e. Γ = 10^− 5). The present study is performed for Γ values from 10^− 5 to 1 and G value from 1 to 100.     

Visualization of natural convection heat transport using heatline method in porous non-isothermally heated triangular cavity

Natural convection heat transfer in a porous media filled and non-isothermally heated from the bottom wall of triangular enclosure is analyzed using finite difference technique. Darcy law was used to write equations of porous media. Dimensionless heatfunction was used to visualize the heat transport due to buoyancy forces. Three different boundary conditions were applied for the vertical and inclined boundaries of triangular enclosures as Case I; both vertical and inclined walls were isothermal, Case II; vertical wall was adiabatic and inclined one was isothermal, Case III; vertical wall is isothermal and inclined one is adiabatic. A cosine function was utilized to get non-isothermal wall condition. The study was performed for different aspect ratios (0.25 ? AR ? 1.0) and Darcy-modified Rayleigh numbers (100 ? Ra ? 1000). It was observed that heat transfer enhancement was formed when vertical and inclined walls were isothermal while bottom wall was at non-uniform temperature. Heat transfer from bottom wall did not vary when the value of aspect ratio was higher than 0.50. In addition, heatline visualization technique was a useful technique for non-isothermally heated and porous media filled triangular enclosures.     

Effect of aspect ratio on entropy generation in a rectangular cavity with differentially heated vertical walls

In the present study, entropy generation in rectangular cavities with the same area but different aspect ratios is numerically investigated. The vertical walls of the cavities are at different constant temperatures while the horizontal walls are adiabatic. Heat transfer between vertical walls occurs by laminar natural convection. Based on the obtained dimensionless velocity and temperature values, the distributions of local entropy generation due to heat transfer and fluid friction, the local Bejan number and local entropy generation number are determined and related maps are plotted. The variation of the total entropy generation and average Bejan number for the whole cavity volume at different aspect ratios for different values of the Rayleigh number and irreversibility distribution ratio are also evaluated. It is found that for a cavity with high value of Rayleigh number (i.e., Ra = 10⁵), the total entropy generation due to fluid friction and total entropy generation number increase with increasing aspect ratio, attain a maximum and then decrease. The present results are compared with reported solutions and excellent agreement is observed. The study is performed for 10² < Ra < 10⁵, 10^− 4 < ? < 10^− 2, and Pr = 0.7.     

Enhancement of Heat Transfer in Partially Heated Vertical Channel Under Mixed Convection by Using Al2O3 Nanoparticles

Laminar mixed convection in a two-dimensional symmetrically and partially heated vertical channel is investigated. The heaters are located on both walls and uniform temperature is applied on the heated sections. The number of heaters is considered as 1, 4, 8, and 10. Aluminum oxide/water nanofluid is considered as working fluid and the inlet velocity is uniform. The continuity, momentum and energy equations with appropriate boundary conditions are solved in dimensionless form, numerically. The study is performed for Richardson number of 0.01 and 10, Reynolds number of 100 and 500, and nanofluid volume fraction of 0% and 5%. Based on the obtained velocity and temperature distributions, the local and mean Nusselt number is calculated and plotted for different cases. The variation of the mean Nusselt number with the number of the heated portions is also discussed. It is found that the addition of nanoparticles into the base fluid increases mean Nusselt number but the rate of increase depends on Reynolds, Richardson numbers and number of heated portions. It is possible to increase mean Nusselt number 138% by increasing Reynolds number from 100 to 500, Richardson number from 0.01 to 10 and number of heated portions from 1 to 10 when volume fraction value is 5%.     

Low-temperature ultrasound synthesis of nanocrystals CoTiO3 without a calcination step: Effect of ultrasonic waves on formation of the crystal growth mechanism

CoTiO₃ nanocrystallites with an average diameter of 50 nm were synthesized successfully by the sonochemical method without a calcination step and using C₁₀H₁₆N₂O₈ (EDTA) as the chelating agent. To reach an in-depth understanding of the scientific basis of the proposed process, an in-detail analysis was carried out for characterization of nanoscale CoTiO₃ particles via XRD, FTIR, FE-SEM and UV–vis diffuse reflectance spectroscopy (DRS). The crystallite size, average particle size and band gap are found to be 10.7 nm, in the range of 50 nm and 4.64 eV, respectively. The mechanism and the formation process of CoTiO₃ in the sonochemical process were proposed. It was found that nanocrystals were formed directly before being oriented and aggregated into large particles in aqueous solution under ultrasonic irradiation. The nucleation in the sonocrystallization process was accelerated by the implosive collapse of bubbles, while the crystal growth process was inhibited or delayed by shock waves and turbulent flow created by ultrasonic radiation. A pure complex perovskite phase of spherical shape was formed completely in a short irradiation time without the calcination process. Sonochemical irradiation could accelerate spherical shape formation of the particles significantly. These results provide new insights into the development and design of better nanomaterial synthesis methods.     

Economical assessment of different HVAC systems for an operating room: Case study for different Turkish climate regions

In this study, the annual energy consumptions of four different heating, ventilation and air conditioning (HVAC) systems serving to operation rooms (ORs) located at five different cities (Izmir, Antalya, Istanbul, Ankara and, Erzurum) in Turkey are analyzed. The study is performed for four different HVAC systems: (a) 100% fresh air system (System I), (b) 100% fresh air with half air volume rate at night period (System II), (c) 100% fresh air with half air volume rate at night period and heat recovery unit (System III), (d) 50% fresh air with half air volume rate at night period and with heat recovery and mixing units (System IV). Life cycle cost (LCC) for 20 years life span is calculated for the considered systems. It is found that System IV considerably reduces energy consumption and it is economically proper for the considered cities. The rate of energy consumption and LCC reductions are greater for the cities with extreme climate condition having relatively low specific humidity ratio. Using System IV instead of System I reduces OR energy consumption by 74% for the city of Erzurum which has a cold and dry climate.     

Forced convection heat transfer inside an anisotropic porous channel with oblique principal axes: Effect of viscous dissipation

An analytical study on laminar and fully developed forced convection heat transfer in a parallel-plate horizontal channel filled with an anisotropic permeability porous medium is performed. The principal axis of the anisotropic porous medium is oriented from 0 to 90 degrees. A constant heat flux is applied on the outer wall of the channel. Both clear (Newtonian) fluid and Darcy viscous dissipations are considered in the energy equation. Directional permeability ratio parameter A¹ is defined to combine both the effect of the dimensionless permeability ratio parameter K¹=(K₁/K₂) and orientation angle φ into one parameter. The effects of the parameter A¹, the Darcy number Da and the modified Brinkman number Br¹ on the heat transfer and fluid flow characteristics in the channels are investigated and presented in graphs. The obtained results show that the parameters A¹, Da and Br¹ have strong effects on the dimensionless normalized velocity and temperature profiles as well as on the Nusselt number. It is found that for a particular value of A¹, called as critical value A_cr¹, the external heat applied to the surface of the channel is balanced by the internal heat generation due to viscous dissipation and the bulk mean temperature approaches the wall temperature. Hence, the Nusselt number approaches infinity for the critical values A_cr¹.     

Conjugate natural convection in a square cavity with finite thickness horizontal walls

The effect of conduction of horizontal walls on natural convection heat transfer in a square cavity is numerically investigated. The vertical walls of the cavity are at different constant temperatures while the outer surfaces of horizontal walls are insulated. A code based on vorticity–stream function is written to solve the governing equations simultaneously over the entire computational domain. The dimensionless wall thickness of cavity is taken as 0.1. The steady state results are obtained for wide ranges of Rayleigh number (10³ < Ra < 10⁶) and thermal conductivity ratio (0 < K < 50). The variation of heat transfer rate through the cavity and horizontal walls with Rayleigh number and conductivity ratio is analyzed. It is found that although the horizontal walls do not directly reduce temperature difference between the vertical walls of cavity, they decrease heat transfer rate across the cavity particularly for high values of Rayleigh number and thermal conductivity ratio. Heatline visualization technique is a useful application for conjugate heat transfer problems as shown in this study.