A new boundary finite element method for fluid–structure interaction problems

In order to study problems on fluid–structure interaction, we have used a mixed formulation which couples the classical functional of the structure with a new variational formulation by integral equations for the fluid. This formulation has the advantage over the finite element methods of avoiding the discretization of the fluid domain. Furthermore, unlike collocation methods, the explicit calculation of the Hadamard finite part of the singular integrals is avoided. This leads after discretization by boundary finite elements to a small and symmetrical algebraic system. Typical examples are presented that demonstrate the efficiency of this variational formulation by studying the sound transmission through a baffled plane structure and through a flexible panel backed by a rigid cavity. These include the calculation of the transmission loss factor and the determination of which modes dominate the noise transmission. Good agreement is obtained between numerical results and analytical results found in the literature.     

Interference characterization in the unlicensed band

We consider performance of a wireless communication receiver in the presence of a field of continuous wave (CW) interferers that are randomly distributed according to a Poisson process in space and frequency domain in the unlicensed band. From our theoretical model, we derive an accurate analytical expression for average bit error rate (BER). Judging from our results for a strong desired signal, when the user density grows up to ten times its value for a given signal to noise ratio (SNR), BER performance falls by 9.09% and 8.51 % for BPSK and DPSK respectively.     

Evidence for internal phosphorus loading,hypoxia and effects on phytoplankton in partially polymictic Lake Simcoe,Ontario

Hypoxia and cyanobacterial blooms were extensive in Lake Simcoe during the 1980s and are still a problem to a lesser degree despite extensive nutrient load reduction from the catchment basin. The continuing signs of productivity indicate a potential internal phosphorus (P) source. Internal P load, as a redox-dependent release from bottom sediments, is hard to determine in a large, relatively shallow and partially unstratified lake such as Lake Simcoe. Of the lake's three major basins, only Kempenfelt Bay stratifies long enough to develop hypoxia in the stagnant summer hypolimnion. The following indications of sediment P release are available from historic data: 1) hypolimnetic hypoxia still occurs in Kempenfelt Bay although the hypoxic factor (number of days that an area equal to the bay's surface area is overlain by water of ≤ 2 mg/L dissolved oxygen, DO) has decreased substantially and significantly from 15.8 d/yr (1980–1994) to 4.0 d/yr (1995–2011); 2) hypoxic factors for other lake sections and at different DO levels also indicate widespread hypoxia; 3) concentrations of redox dependent metals, Fe and Mn, increase with depth; and 4) euphotic zone P and chlorophyll concentrations increase and water clarity decreases during fall turnover. Cyanobacterial blooms appear to occur in response to internal load as supported by occasional cyanobacteria counts. These indicators provide evidence that internal loading is likely occurring and affecting the water quality in Lake Simcoe. We expect that further monitoring, specific for internal load, will corroborate these results.     

RCC-Full: An Effective Network for Parallel Computations

A new interconnection network is proposed for the construction of a massively parallel computer system. The systematic construction of this interconnection network, denoted RCC-FULL, is performed by methodically connecting together a number of basic atoms where a basic atom is a set of fully interconnected nodes. Key communication characteristics are derived and evaluated for RCC-FULL and efficient routing algorithms, which need only local information to route messages between any two nodes, are also derived. AnO(log (N)) sorting algorithm is shown for RCC-FULL and RCC-FULL is shown to emulate deterministically the CRCW PRAM model, with onlyO(log (N)) degradation in time performance. Finally, the hardware cost for the RCC-FULL is estimated as a function of its pin requirements and compared to that of the binary hypercube and most instances of RCC-FULL have substantially lower cost. Hence, RCC-FULL appears to be a particularly effective network for PRAM emulation, and might be considered as a universal network for future supercomputing systems.     

A novel Arabic OCR post-processing using rule-based and word context techniques

International Journal on Document Analysis and Recognition (IJDAR) - Optical character recognition (OCR) is the process of recognizing characters automatically from scanned documents for editing,...     

Optimum mechanical behavior of calcium phosphate cement/hydroxyl group functionalized multi-walled carbon nanotubes/bovine serum albumin composite using metaheuristic algorithms

Injectable calcium phosphate cements have been introduced as adjuncts to internal fixation for treating selected fractures. These cements harden without producing much heat, develop compressive strength, and are remodeled slowly in vivo. The main purpose of the cement is to fill voids in metaphyseal bone, thereby reducing the need for bone graft. However, such cements may also improve the holding strength around metal devices in osteoporotic bone. This paper presents the optimum mechanical behavior of calcium phosphate cement/hydroxyl group functionalized multi-walled carbon nanotubes/bovine serum albumin (CPC/MWCNT-OH/BSA) composites in terms of compressive strength using well-known metaheuristic optimizers. The process parameters studied were wt% of MWCNT-OH (0.2–0.5 wt%) and wt% of BSA (5–15 wt%). The obtained results from metaheuristic algorithms were compared with the results from the response surface methodology (RSM) in the literature. The results obtained from metaheuristic algorithms outperformed the results given by the RSM in terms of less error percentage and high compressive strength.     

Mechanism of action of Melaleuca armillaris (Sol. Ex Gaertu) Sm. essential oil on six LAB strains as assessed by multiparametric flow cytometry and automated microtiter-based assay

Little is known concerning the effects of essential oils (EOs) against lactic acid bacteria (LAB), either of the human gastrointestinal microflora or those involved in industrial processes. GC and GC/MS analysis of Melaleuca armillaris EO resulted in the identification of 68 compounds comprising 99.6% of the oil. Eucalyptol (1,8-cineole) was the major compound (68.9%) and the composition was largely dominated by the oxygenated monoterpenes fraction (77.3%). The anti-LAB activities of the EO were first checked by the disc diffusion assay. In a second phase, time-survival kinetics of each strain incubated with increasing concentrations of the EO (0.25, 2.5, 5 and 25 μg/ml) were established using an automated microtiter assay (Bioscreen C). Bacteriostatic or bactericidal effects were noticed depending on the studied strain and on the applied concentration of the EO. The mathematical modelling of the kinetics showed that in presence of increasing concentrations of M. armillaris EO, the lag phases of growth were extended (0.69%–97.5%) and both the growth rate and final cell density were reduced. Variations depending on the strain were noticed.     

Direct Synthesis of Pyrazoles via reaction of C-ethoxycarbonyl-N-arylnitrilimines with benzalmalononitriles and some α-cyanocinnamic acid derivatives

Reaction of C-ethoxycarbonyl-N-arylnitrilimines ( 2a–d ) with α, β-disubstituted acrylonitriles ( 3a–f ) in refluxing benzene affords the corresponding substituted pyrazoles 5a–f and 6a–c respectively in good yield. However, reaction of 2a–e with 3g gives the 2-pyrazoline derivatives 7a–d . The assigned structures for the products 5–7 were confirmed by their spectra (i.r., ¹H-n.m.r.) and elemental analyses. Also the structures of the pyrazoles 5 were substantiated by comparison with their regioisomeres 8 .     

Multimedia-MAC protocol: its performance analysis and applications for WDM networks

The design of the medium-access control (MAC) protocol is the most crucial aspect for high-speed and high-performance local and metropolitan area networks, since the decisions made at this level determine the major functional characteristics of these networks. Most of the MAC protocols proposed in the literature are not suitable for multimedia applications, since they have been designed with one generic traffic type in mind. As a result, they perform quite well for the traffic types they have been designed for, but poorly for other traffic streams with different characteristics. In this paper, we propose an integrated MAC protocol called the Multimedia-MAC (M-MAC), which integrates different MAC protocols into a hybrid protocol in a shared-medium network to efficiently accommodate various types of multimedia traffic streams with different characteristics and quality-of-service demands, namely, a constant-bit-rate traffic, bursty traffic (say, variable-bit-rate traffic), and emergency messages (say, control messages). We have developed a mathematical framework for the analysis and performance evaluation of our M-MAC protocol, which involves a queueing system with vacation. We have applied our M-MAC design approach to a wavelength-division multiplexing network, and evaluated its performance under various traffic conditions.