Electrical and magnetic properties of lithium borate glass containing iron

Journal of Materials Science Letters -     

Bayes and classical estimation of environmental factors for thebinomial distribution

An environmental factor converts reliability test results at one environmental condition into equivalent “failure” information at other environments. This paper studies environmental-factor estimation for the binomial distribution. Under general conditions, Bayes point estimates and credibility limits for environmental factors are derived. Classical point and confidence interval estimates are introduced and compared with the Bayes estimators. The characteristics of Bayes and classical estimators for the binomial distribution are summarized through numerical computation and theoretical analysis. A numerical example of reliability assessment by means of environmental factors is presented     

Effect of doping polyacrylic acid with some dopants as studied by different techniques

The molecular weight of polyacrylic acid (PAA) was determined by a viscometric method using NaNO₃ as solvent at 30°C. The specific electric conductivities (σ) of PAA as well as PAA doped with carbon black (CB), chromium oxide (Cr₂O₃), and cupferron with different concentrations (from 0.25 to 1 wt %) were measured at a temperature range 360–400 K. IR spectra of some polymers were determined and it was shown that when PAA was doped with 0.5 wt % CB, a C? O? C band appeared at 775–875 cm^?1. The positron annihilation lifetime (PAL) spectra in PAA doped with the above‐mentioned dopants were measured as a function of their concentrations. It was observed that the short lifetime intensity I₁ decreased, whereas the intermediate lifetime intensity I₂, which is related to the conductivity of the material, increased with increasing the wt % of Cr₂O₃ and cupferron as well as at low concentrations of CB. These results are discussed in terms of the conducting island model. It was found that there were distinct positive relationships between σ and I₂. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 877–883, 2002; DOI 10.1002/app.10381     

On an evolutionary approach for constrained optimization problem solving

Over the last few decades, many different evolutionary algorithms have been introduced for solving constrained optimization problems. However, due to the variability of problem characteristics, no single algorithm performs consistently over a range of problems. In this paper, instead of introducing another such algorithm, we propose an evolutionary framework that utilizes existing knowledge to make logical changes for better performance. The algorithmic aspects considered here are: the way of using search operators, dealing with feasibility, setting parameters, and refining solutions. The combined impact of such modifications is significant as has been shown by solving two sets of test problems: (i) a set of 24 test problems that were used for the CEC2006 constrained optimization competition and (ii) a second set of 36 test instances introduced for the CEC2010 constrained optimization competition. The results demonstrate that the proposed algorithm shows better performance in comparison to the state-of-the-art algorithms.     

An isogeometrical approach to structural topology optimization by optimality criteria

The Isogeometric Analysis (IA) method is applied for structural topology optimization instead of finite elements. For this purpose, a control point based Solid Isotropic Material with Penalization (SIMP) method is employed and the material density is considered as a continuous function throughout the design domain and approximated by the Non-Uniform Rational B-Spline (NURBS) basis functions. To prevent the formation of layouts with porous media, a penalization technique similar to the SIMP method is used. For optimization an optimality criteria is derived and implemented. A few examples are presented to demonstrate the performance of the method. It is shown that, dissimilar to the element based SIMP topology optimization, the resulted layouts by this method are independent of the number of the discretizing control points and checkerboard free.     

The specific enthalpy of fracture for beta Ti-15-3 alloy

Fatigue crack propagation (FCP) experiments were conducted on beta Ti-15-3 alloy under various loading conditions to examine the constancy of the specific enthalpy for fracture, advanced by the Crack Layer (CL) theory as a material parameter characteristic of its intrinsic toughness. The energy release rate and the irreversible work were determined from load-displacement curves during crack propagation. Microscopic and diffraction analyses were conducted to identify the damage mechanisms ahead of the crack tip. A damage zone whose geometry exhibited plane strain character at the initial stage of crack propagation was observed optically. The damage zone transformed into plane stress configuration when the crack reached half its critical length. Damage mechanisms involved slip lines and microcracking which is believed to ensue from intense accumulation of slip processes. The magnitude of microcracking became more weighty as the crack moved deeper into plane stress dominance. The damage preceding crack advance was quantitatively assessed as the crack resistance moment which is the volume of transformed material per unit crack extension. Application of the CL theory to the data generated under a wide range of applied stress levels gave rise to a constant value of the specific enthalpy of fracture, 20 MJ/m³. This value is in close agreement with the specific energy of slip lines computed from microstructural considerations.     

Additive Behavior in Copper Electrorefining

This paper reports on the mode of action of two different organic additives—gelatine and thiourea—during the electrorefining of copper from acid copper sulfate solutions. Gelatine increases the cathode current efficiency and produces smoother deposits up to a certain level of concentration, beyond which, however, these effects are diminished by the steric hinderance of bulky molecular entities adsorbed to the electrode surface. Thiourea decreases the cathode current efficiency when present at concentrations around 5 mg/1. Nonetheless, it improves deposit quality. In higher concentrations, thiourea increases the cathodic current efficiency but also promotes nodule formation and rough deposits. The degradation and/or hydrolysis of both additives and the various interactions with the electrode surface and with cupric ions in solution are also examined.     

Thermodynamics of ionic-association in aqueous solutions of Ca and Mg organic salts using ion-selective electrode technique—II. benzoate, o-toloate, o-chlorobenzoate and salycylate

The stoichiometric association constants, K, the thermodynamic association constant, K_A, and the other thermodynamic parameters such as ΔS°, ΔH° and ΔG° for the association between each of the Ca and Mg ions with benzoate, o-toloate, o-chlorobenzoate and salycylate have been determined at 25°C, 35°C and 45°C in aqueous media. Ion-selective electrode technique has been used in the measurements of Ca and Mg ion activitiesThe trend of association behavior of both Ca and Mg aromatic salts could not be explained on the basis of pK_a of the mother organic acids but could be explained based on the trend of Hammet function σ of these salts themselves relative to the corresponding benzoate salt.     

Graft polymerization of acrylic acid onto starch using potassium permanganate acid (redox system)

Graft polymerization of acrylic acid (AA) onto rice starch using postassium permanganate/acid redox system as initiator was investigated. When starch was reacted with KMnO₄ solution, MnO₂ was deposited onto starch. The dependence of MnO₂ amount deposited was directly related to KMnO₄ concentration. Subjecting the MnO₂-containing starch to a solution consisting of monomer (AA) and acid (citric, tartaric, oxalic and hydrochloric acid) formed poly(AA)–starch graft copolymers. The graft yield, expressed as meq COOH/100 g starch, was measured by the amount of MnO₂ deposited, AA concentration, material-to-liquor ratio, kind and concentration of acid, as well as temperature and duration. Finally, the newly prepared poly(AA)–starch graft copolymers were applied to cotton textiles to determine their suitability as sizing agents. The highest graft yield was obtained with citric acid and the least with hydrochloric acid, with tartaric and oxalic acid in between. The graft yield increased by increasing the concentration of acid to a certain concentration beyond which grafting leveled off. A similar trend was observed when the magnitude of grafting was related to the amount of MnO₂ deposited. The graft yield increased by increasing the polymerization temperature from 30° to 50°C. Increasing the temperature to 60°C is accompanied by decreased grafting. On the other hand, fabric samples sized with poly(AA)–starch graft copolymers acquire higher tensile strength, elongation at break, and abrasion resistance than that sized with native rice starch, i.e., poly(AA)–starch graft copolymers serve as good sizing agents for cotton textiles. A tentative mechanism for grafting rice starch with AA using the KMnO₄/acid redox system was elucidated. © 1995 John Wiley & Sons, Inc.