Hydrogen limitation--a method for controlling the performance of membrane biofilm reactor for autotrophic denitrification of wastewater.

Hydrogen-driven denitrification using the fiber membrane biofilm reactor (MBfR) was evaluated for consistent operation in tertiary wastewater treatment. The possibility of controlling the process rates, as well as biofilm parameters by supplying limited amounts of electron donor (hydrogen), was tested. Limiting the hydrogen supply proved to be efficient in controlling the biofilm growth and performance of the MBfR. Denitrification rates remained unchanged for both synthetic wastewater (SWW) and real municipal wastewater (MWW) effluent as well through the fluctuations in the substrate (NO3-N) concentration. The average denitrification rates were 0.50 (+/- 0.02) g NO3-N per day per m2 for SWW and 0.59 (+/- 0.04) g NO3-N per day per m2 for MWW. Biofilm density rather than thickness was the determining factor in substrate diffusion and biofilm sloughing, ultimately determining operating stability. Limited hydrogen supply assured constant volatile solids (VS) concentration in the biofilm. It was determined that VS/TS ratio higher than 0.25 assured stable biofilm operation. Decrease of VS/TS ratio below 0.25 led to shearing of the nonbiological outer layers of the biofilm. The values of chemical oxygen demand (COD), volatile suspended solids (VSS) and total suspended solids (TSS) in the final effluent were stable and well below wastewater effluent guidelines. Substitutions of bicarbonate with gaseous carbon dioxide as the carbon source did not affect denitrification rates despite lower than optimum pH conditions.     

Hydrogen-driven denitrification of wastewater in an anaerobic submerged membrane bioreactor: potential for water reuse.

An anaerobic submerged membrane bioreactor was coupled with a novel hydrogen delivery system for hydrogenotrophic denitrification of municipal final effluent containing nitrate. The biological treatment unit and hydrogen delivery unit were proven successful in removing nitrate and delivering hydrogen, respectively. Complete hydrogen transfer resulted in reducing nitrate below detectable levels at a loading of 0.14 kg Nm(-3) d(-1). The produced water met all drinking water guidelines except for color and organic carbon. However, the organic carbon was removed by 72% mostly by membrane rejection. To reduce the organic carbon and color of the effluent, post treatment of the produced water is required.     

Wavelet ridges for musical instrument classification

The time-varying frequency structure of musical signals have been analyzed using wavelets by either extracting the instantaneous frequency of signals or building features from the energies of sub-band coefficients. We propose to benefit from a combination of these two approaches and use the time-frequency domain energy localization curves, called as wavelet ridges, in order to build features for classification of musical instrument sounds. We evaluated the representative capability of our feature in different musical instrument classification problems using support vector machine classifiers. The comparison with the features based on parameterizing the wavelet sub-band energies confirmed the effectiveness of the proposed feature.     

An Organoid for Woven Bone

Bone formation (osteogenesis) is a complex process in which cellular differentiation and the generation of a mineralized organic matrix are synchronized to produce a hybrid hierarchical architecture. To study the mechanisms of osteogenesis in health and disease, there is a great need for functional model systems that capture in parallel, both cellular and matrix formation processes. Stem cell-based organoids are promising as functional, self-organizing 3D in vitro models for studying the physiology and pathology of various tissues. However, for human bone, no such functional model system is yet available. This study reports the in vitro differentiation of human bone marrow stromal cells into a functional 3D self-organizing co-culture of osteoblasts and osteocytes, creating an organoid for early stage bone (woven bone) formation. It demonstrates the formation of an organoid where osteocytes are embedded within the collagen matrix that is produced by the osteoblasts and mineralized under biological control. Alike in in vivo osteocytes, the embedded osteocytes show network formation and communication via expression of sclerostin. The current system forms the most complete 3D living in vitro model system to investigate osteogenesis, both in physiological and pathological situations, as well as under the influence of external triggers (mechanical stimulation, drug administration).     

Effects of pomegranate sauce on quality of marinated anchovy during refrigerated storage

Effects of pomegranate sauce on the quality of marinated anchovy during storage at 4 °C were investigated. Anchovy were marinated with 30 g/L acetic acid and 150 g/L salt, put into glass jars, filled with either sunflower oil or pomegranate sauce and stored at 4 °C. Total volatile basic nitrogen (TVB-N) and trimethylamine (TMA-N) values increased during the storage. Higher values for free fatty acid (FFA), conjugated diens (k-dien) and para-anisidine (p-Av) were found in samples with sunflower oil than those with pomegranate sauce. Samples in pomegranate sauce showed better oxidative stability. Higher taste and flavour and lower appearance scores were found for samples in pomegranate sauce than those samples in sunflower oil. It was found that pomegranate sauce was as least effective as the traditional sunflower oil to keep quality. Pomegranate sauce also produced desirable taste and flavour but the coloration should be studied in further studies.     

Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel

In this study, the effects of deep cryogenic treatment (DCT) on the wear resistance of AISI 52100 bearing steel were investigated. For this purpose, a number of bearing steel samples were held for different times (12, 24, 36, 48, 60 h) at deep cryogenic temperatures (?145 °C). The wear experiments were carried out in a ball–disk arrangement, by applying loads of 10 and 20 N and a sliding velocity of 0.15 m/s. After conducting the experimental studies, 36 h was found to be the optimal holding time. At this holding time, the wear rate and friction coefficient were decreased, while the hardness reached to maximum values. It was observed that DCT led to significant microstructural changes, which resulted in improved tribological properties.     

Separation of squalene from olive oil deodorizer distillate using supercritical fluids

In this study, an integrated strategy using supercritical fluids for extraction of squalene from olive oil deodorizer distillate (OODD), one of the most important by‐products of the olive oil refining process is presented. First, OODD was esterified in supercritical methanol, and then squalene was extracted from the sample consisting of 66% methyl ester using supercritical CO₂. The extraction conditions, i.e., pressure (88.2–121.8 bar), temperature (41.6–58.4°C) and extraction time (129.6–230.4 min), were optimized via RSM to achieve the highest squalene content. The optimal results were obtained at a temperature of 52.05°C, pressure of 104.8 bar and extraction time of 180 min. Consequently, two kinds of value‐added products such as biodiesel (up to 96% FAME, in extract) and olive squalene (up to 75%, in raffinate) were produced in shorter processing times when compared with distillation results of 70 h. Practical applications: Traditionally, squalene is extracted from liver oil of rare deep‐sea sharks. Here we present the recovery of vegetal squalene in high purity from OODD. Our approach also presents a simple, reliable, and mobile solution. Squalene is widely used in cosmetics as a protective agent and natural moisturizer and as an adjuvant in influenza vaccines.     

Inhibition effects of green tea and grape seed extracts on lipid oxidation in bonito fillets during frozen storage

The aim of this study was to investigate inhibition effects of green tea and grape seed extracts on lipid oxidation in bonito (Sarda sarda) fillets during frozen storage. Dried and powdered green tea and grape seed were extracted using ethanol. Extract solutions of 1 g 100 g^?1 were prepared using concentrated extracts and distilled water. Bonito fillets were divided into two groups. The first group was dipped into extract solutions and then frozen. The second group of fillets was glazed by extract solutions. Oxidation increased progressively through the storage period. 2‐Thiobarbituric acid and para‐anisidine values of samples treated with green tea and grape seed extracts remained at low levels. Both plant extracts displayed successful effects in delaying lipid oxidation compared to the control groups. The best results were obtained by extract treatment of fillets before freezing.     

Separation and purification of hyaluronic acid by glucuronic acid imprinted microbeads

The purification of hyaluronic acid (HA) is relatively significant to use in biomedical applications. The structure of HA is formed by the repetitive units of glucuronic acid and N-acetyl glucosamine. In this study, glucuronic acid-imprinted microbeads have been supplied for the purification of HA from cell culture (Streptococcus equi). Histidine-functional monomer, methacryloylamidohistidine (MAH) was chosen as the metal-complexing monomer. The glucuronic acid-imprinted poly(ethyleneglycoldimethacrylate-MAH-Copper(II)) [p(EDMA-MAH-Cu²⁺)] microbeads have been synthesized by typical suspension polymerization procedure. The template glucuronic acid has been removed by employing 5 M methanolic KOH solution. p(EDMA-MAH-Cu²⁺) microbeads have been characterized by elemental analysis, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) images and swelling studies. Moreover, HA adsorption experiments have been performed in a batch experimental set-up. Purification of HA from cell culture supernatant has been also investigated by determining the hyaluronidase activity using purified HA as substrate. The glucuronic acid imprinted p(EDMA-MAH-Cu²⁺) particles can be used many times with no significant loss in adsorption capacities. Also, the selectivity of prepared molecular imprinted polymers (MIP) has been examined. Results have showed that MIP particles are 19 times more selective for glucuronic acid than N-acetylglucose amine.