Effect of anisotropy of tin on thermomechanical behavior of solder joints

Properties of body centered tetragonal tin are highly anisotropic. As a consequence large stresses can develop at the tin grain boundaries due to coefficient of thermal expansion mismatch during temperature excursions. A modeling approach to evaluate the 3D stress states that develop at grain boundaries during thermomechanical fatigue in tin-based solder is presented. Development of significant amounts of stresses in the plane of the grain boundary can cause grain-boundary sliding and surface-relief effects, while those normal to the grain boundary can cause grain-boundary decohesion and cracking.     

Effects of situational demand upon social enjoyment and preference in schizotypy.

The socioemotional functioning of schizophrenic and schizotypic individuals is marked by withdrawal, poor organization, and limited emotional displays. Such behavioral tendencies and lack of social enjoyment in schizotypy could be linked to the relative situational demands or role ambiguity inherent in specific social activities. To determine whether high-schizotypy individuals prefer more clearly role-defined social activities (e.g., visiting relatives) to more ambiguous, novel situations (e.g., going alone to a party), the authors gathered reports from 52 high-schizotypy and 60 low-schizotypy individuals on their enjoyment and frequency of engaging in social situations varying in relative situational demand. Parallel reports were obtained from knowledgeable others. Group × Situational Demand interactions revealed the hypothesized pattern of reduced frequency and enjoyment ratings for ambiguous or novel situations by the high-schizotypy participants in both self and others' reports. Groups were more comparable in their reported frequency and enjoyment of less ambiguous situations. Results suggest the importance of situational demands in the socioemotional experience and behavioral withdrawal in schizotypy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of organic dopants on electrodeposition and characteristics of polyaniline under the varying influence of H2SO4 and HClO4 electrolyte media

Electrodeposition of conducting polyaniline (Pani) was made under potentiostatic condition at pH 1.0 in different electrolyte media (H₂SO₄ and HClO₄) in the absence and presence of two organic dopants, disodium salts of naphthalene-1,5-disulphonic acid (NSA) and of catechol-3,5-disulphonic acid (CSA). The rate and yield of Pani deposition were dependent on the acid medium and the dopant employed. NSA in H₂SO₄ caused an increase in rate and yield but CSA decrease when compared to the rate and yield of H₂SO₄ alone. In HClO₄ medium, both the dopants showed a decrease. With regard to DC electrical conductivity, both the dopants exhibited an enhancement in H₂SO₄ medium but NSA a decline in HClO₄. Characterisation of the electrosynthesised polymer samples by various instrumental techniques (cyclic voltammetric: CV, FTIR, UV-Visible: UV-Vis, EPR, XRD, TGA and DTG methods) revealed that between the two acid media, H₂SO₄ was the better one. Further, it enlightened the role of two organic dopants in relation to the acid media. The advantageous role of NSA in H₂SO₄ had origin on its molecular characteristics such as non-polarity, larger π-electron cloud etc., while CSA could not perform such a role because of its easily oxidisable hydroxyl groups. In HClO₄, however, both the dopants could play only an unfavourable role owing to its greater polarity and oxidizing power than H₂SO₄.     

Performance analysis of voting strategies for a fly-by-wire systemof a fighter aircraft

Findings of studies on input processing of a digital fly-by-wire system of a fighter aircraft are presented. Objectives were to select a suitable software structure complying with reliability and fault tolerance requirements and to assess its computational load. Ramp and constant input signals with noise were studied based on Monte-Carlo methods. Voting strategies studied and compared include lower-median, upper-median, and weighted average. Execution times and memory requirements of each strategy have also been assessed     

A micromechanics model for the prediction of static strength of off-axis unidirectional laminates

In this paper a micromechanics model using the concentric cylinder assemblage model and the Mori-Tanaka average stress scheme is used to predict the static strength of unidirectional angle ply laminates. The predicted strengths agree with experimental results for Glass/Epoxy and Graphite/Epoxy systems.     

Synthesis and metal uptake studies on poly(8‐hydroxy‐5‐azoquinolinephenylacrylate‐formaldehyde) resin and its metal complexes

8‐hydroxy‐5‐azoquinolinephenylacrylate‐formaldehyde (8H5AQPA‐F) macromonomer was prepared from acryloylchloride, with condensation products of 8‐hydroxy‐5‐azoquinolinephenol‐formaldehyde, and polymerized in DMF at 70°C using benzoyl peroxide as free radical initiator. Poly(8H5AQPA‐F) was characterized by infrared and nuclear magnetic resonance spectroscopic techniques. Polychelates were obtained in alkaline solution of polymeric ligand, with the aqueous solution of Cu(II) and Ni(II). Elemental analysis of polychelates suggests that the metal to ligand ratio is about 1:2. The polymer metal complexes were also characterized by IR, XRD, magnetic moments, and thermal analysis. The effects of pH and electrolyte on the metal uptake behavior of the resin were also studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 797–802, 2007     

Influence of modified forms of urea and nitrogen levels on weed growth and grain yield of lowland rice

The growth of weeds and their subsequent reduction of rice yield as affected by N source neem cake coated urea (NCU), dicyandiamide coated urea (DCU), rock phosphate coated urea (RPCU), urea supergranules (USG) and prilled urea (PU) was studied on a clay loam soil at Coimbatore, India. Experiments were conducted in northeast monsoon (NEM) 1981, summer 1982, and southwest monsoon (SWM) 1982 seasons.The crop was associated with eleven weed species, and the dominant weeds wereEchinochloa crus-galli, Cyperus difformis andMarsilea quadrifolia. The weed flora varied between seasons. Deep placement of USG reduced the dry weight of weeds in NEM and summer seasons at 60, 90 and 120 Kg N ha^–1 whereas it increased the dry weight at 60 and 90 but not 120 Kg N ha^–1 in SWM season. The dry weight of weeds decreased with increased N rates for all N sources during NEM and summer seasons. In SWM season, dry weight of weeds increased with increased N rates for all N sources except USG. The grain yield of rice was drastically reduced with the deep placement of USG at 60 but not 120 Kg N ha^–1 in SWM season. The differential effect of the N sources between seasons was due to the change of the weed flora. Dominance ofE. crus-galli during SWM season had greater influence on weed dry weight and grain yield of rice.Nitrogen uptake by weeds was frequently greater in unfertilized plots, particularly in NEM and summer seasons. In SWM season, the apparent fertilizer N recovery by weeds was high for USG. It decreased from 53% for 60 Kg USG-N ha^–1 to 4% for 120 Kg USG-N ha^–1.Contribution from the part of Ph.D. work of the first author at Department of Agronomy, Tamil Nadu Agricultural University, Coimbatore-641 003, Tamil Nadu, India.     

Processing iron-aluminide composites containing carbides or borides

Iron-aluminide composites containing 30–90 vol. % carbides or borides can be processed to near full density (greater than 97% theoretical density). This wide range of ceramic contents enables the tailoring of the composite properties to a variety of applications requiring a combination of the corrosion and oxidation resistance of iron aluminides and the hardness and wear resistance of the ceramic phases. The composites are processed by conventional liquid-phase sintering of mixed powders as well as pressureless melt infiltration. Typical mechanical properties such as hardness, flexure strength, and fracture toughness were evaluated for composites containing different volume fractions of carbide or boride particulates. Furthermore, evaluations of the wear resistance, oxidation resistance, aqueous corrosion resistance, and thermal expansion of the iron-aluminide composites suggest many potential applications for these new materials.