Energy Harvesting System Design and Optimization Using High Bandwidth Rectenna for Wireless Sensor Networks

Wireless Personal Communications - Today’s world has a keen interest in systems which are battery-less and can harvest energy from their surroundings. There is an increased demand for...     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Automatic ultrastructure segmentation of reconstructed cryoEM maps of icosahedral viruses.

We present an automatic algorithm to segment all the local and global asymmetric units of a three-dimensional density map of icosahedral viruses. This approach is readily applicable to the structural analysis of a broad range of virus structures that are reconstructed using cryo-electron microscopy (cryo-EM) technique. Our algorithm includes three major steps operating on the three dimensional density map: the detection of critical points of the volumetric density function, the detection of global and local symmetry axes, and, finally, the boundary segmentation of all the asymmetric units. We demonstrate the efficacy of our algorithm and report our results on several experimental volumetric datasets, consisting of both reconstructed cryo-EM molecular density maps taken from the European Bioinformatics Institute archive, as well our own synthetically generated (blurred) maps calculated from X-ray resolution molecular structural data taken from the Protein Data Bank.     

Carbohydrate content of potato (Solanum tuberosum L.) tubers treated with Isopropyl-N (3-chlorophenyl) carbamate under different storage conditions

Post harvest application of Isopropyl-N (3-chlorophenyl) carbamate considerably reduced the degradation of starch when potato tubers were stored in an evaporative cooling chamber. The starch degraded at a faster rate when tubers were kept under refrigerated and room storage conditions.     

Melt intercalation/exfoliation of polystyrene-sodium-montmorillonite nanocomposites using sulfonated polystyrene ionomer compatibilizers

Quaternary ammonium salts of sulfonated polystyrene (SPS) were used as compatibilizers for melt intercalation of PS and pristine Na-montmorillonite. Tetra-octyl ammonium SPS and tetra-decyl ammonium SPS ionomeric compatibilizers produced significant exfoliation and a homogeneous dispersion of the polymer-clay nanocomposites. Wide angle X-ray diffraction and transmission electron microscopy were primarily used to characterize the morphology of the nanocomposites. Image analysis was used to measure the percentage exfoliation. Exfoliation increased with the increasing length of the alkyl chain of the ammonium counter-ion of the SPS ionomer. The nanocomposites containing ionomers exhibited higher storage moduli compared to nanocomposites without the compatibilizer.     

Modeling of in situ monitored laser reflectance during MOCVD growth of HgCdTe

An effective way to in situ monitor the metalorganic chemical vapor deposition (MOCVD) of HgCdTe/CdTe/ZnTe on GaAs or GaAs/Si substrates is presented. Specular He-Ne laser reflectance was used to in situ monitor the growth rates, layer thickness, and morphology for each layer in the grown multilayer structure. In situ monitoring has enabled precise measurements of ZnTe nucleation and CdTe buffer layer thicknesses. Monitoring the constancy of reflectance during the thicker CdTe buffer growth where absorption in the CdTe reduces reflectance to just the surface component has led to optimum buffer growth ensuring good quality of subsequently grown HgCdTe. During the interdiffused multilayer process (IMP) HgCdTe growth, because multiple interfaces are present within the absorption length, a periodic reflectance signal is maintained throughout this growth cycle. A theoretical model was developed to extract IMP layer thicknesses from in situ recorded experimental data. For structures that required the growth of a larger band gap HgCdTe cap layer on top of a smaller band gap active layer, in situ monitored reflectance data allowed determination of alloy composition in the cap layer as well. Continuous monitoring of IMP parameters established the stability of growth conditions, translating into depth uniformity of the grown material, and allowed diagnosis of growth rate instabilities in terms of changes in the HgTe and CdTe parts of the IMP cycle. A unique advantage of in situ laser monitoring is the opportunity to perform “interactive” crystal growth, a development that is a key to real time MOCVD HgCdTe feedback growth control.     

Effect of coupling agents on thermal and electrical properties of mica/epoxy composites

The influence of 3-aminopropyltriethoxysilane, 3-glycidyloxypropyltrimethoxysilane, and neoalkoxytric(dioctyl pyrophosphato)zirconate on thermal expansion behavior, dielectric strength, and arc resistance of mica/epoxy composites has been investigated. The addition of mica up to 30% resulted in the reduction of thermal expansion with respect to neat resin. However, the coefficient of linear thermal expansion of 30% mica treated with aminosilane was the least among the various coupling agent-coated filler/epoxy composites. Mica (30%)/epoxy composites showed the highest dielectric strength values (26 kV/mm), but the highest arc resistance was obtained in zirconate-treated mica (30%)/epoxy composite. © 1995 John Wiley & Sons, Inc.