An Evaluation of Public Concerns About Water Management in the Palestinian Territory Pre,During, and Post the National Uprising

We have evaluated the extent of public concerns about water management in the Palestinian Territory (PT) through a survey of the main Palestinian newspaper over the last thirteen years divided in three periods: pre (1984–1987), during (1988–1991), and post national uprising period (1992–1996). The public concern in the PT about various water management aspects was clear and influenced by the prevailing political conditions indicating (1) poor concerns in the first and second period where full Israeli military control of the PT and harsh practices prevailed with relatively more emphasis on regional water issues and (2) extensive-strong concerns in the third period when the peace process started and a partial lift of some of the Israeli water practices took place, along with an increased freedom in expressing public concerns which was granted with more emphasis on local issues and problems. Lack and limitation of water available to Palestinians, alternative solutions, and water quality and pollution control constituted the overwhelming majority of the topics of concern to the public for the three periods studied. Palestinian concerns were always greater than regional ones for the three periods and all of the topics considered. Public concern in the PT about all other water management aspects was poor and negligible especially in the first two periods. A massive increase in public concern has been observed in the third period in which the public expressed their concern over most water management aspects, indicating a possible change in public attitude toward water and water management and reflecting the change of the political status by the start of the peace process and the signing of the peace agreements.     

Overview of Water Policy Developments: Pre- and Post-2015 Development Agenda

The year 2015 marked the end of some important universal decisions regarding water developments. The International Decade for Action ‘Water for Life’ (2005–2015) was concluded so that a “Post-2015 Development Agenda” is now defined. 2015 was also the year when UN Millenium Goals (MDGs) came to an end to convert into the new Agenda, which is a process led by the United Nations (UN) to define the future global development framework. The proposed goal is now referred to as SDG’s or Sustainable Development Goals, that extend existing commitments such as the MDGs and the priorities of Rio + 20. SDG’s will balance the economic, social and environmental dimensions of sustainable development with a strong linkage between environment and socio-economic goals. They converge with the post-2015 development agenda, now called Agenda 30 as these goals will be valid until 2030. One of the major concepts of SDG’s is water security, which is the basic element of the Global Goal on Water. Water security is the capacity of a population to safeguard sustainable access to adequate quantities of acceptable quality of water for sustaining livelihoods, human well-being, and socioeconomic development, for ensuring protection against pollution and waterrelated disasters, and for preserving ecosystems in a climate of peace and political stability. This paper discusses the developments in water management within the last 30 years, which eventually led to the above concepts. A summary is provided on key events and documents of these past years to point out how the international community has reacted towards present and emerging needs of the society.     

Severe facial clefting, limbic dermoid, hypoplasia of the corpus callosum, and multiple skin appendages: severe frontofacionasal "dysplasia" or newly recognised syndrome?

We report on a child with severe midline facial cleft, bilateral cleft lip and palate, telecanthus, S-shaped palpebral fissures, limbic dermoid, midface hypoplasia, hypoplastic corpus callosum, and multiple skin appendages. This case may be an example of severe frontofacionasal "dysplasia" or a newly recognised syndrome.     

Comparative evaluation of full‐scale UASB reactors treating alcohol distillery wastewaters in terms of performance and methanogenic activity

In this study, two full‐scale upflow anaerobic sludge blanket (UASB) reactors, namely TUASB and CUASB, at the wastewater treatment plants of the Tekirdaǧ Alcohol (Raki) and Canakkale Alcohol (Cognac) distilleries were investigated in terms of performance, acetoclastic methanogenic capacity and microbial composition. The results were compared with a previously studied other UASB reactor (IUASB) at the wastewater treatment plant of the Istanbul Alcohol (Raki) Distillery from which the two reactors (TUASB and CUASB) were seeded. The IUASB reactor performed well achieving COD removal efficiencies of no lower than 85% at organic logding rates (OLRs) in the range of 6–11 kg COD m⁻³ day⁻¹ between 1996 and 2001. During the last one year of operation, between 2000 and 2001, performance of the CUASB reactor in terms of COD removal efficiency was 70–80% at OLRs in a range of 1–4.5 kg COD m⁻³ day⁻¹ whereas it was 60–80% at OLRs in a range of 2.5–8.5 kg COD m⁻³ day⁻¹ in the TUASB reactor. At the end of year 2000, specific methanogenic activity (SMA) tests were carried out to determine potential loading capacity and optimum operating conditions of the IUASB, CUASB and TUASB reactors. The potential methane production (PMP) rates of the CUASB, IUASB and TUASB reactors were measured as 230 cm³ CH₄ gVSS⁻¹ day⁻¹, 350 cm³ CH₄ gVSS⁻¹ day⁻¹ and 376 cm³ CH₄ gVSS⁻¹ day⁻¹ respectively. When the PMP rates were compared with actual methane production (AMP) rates obtained from the three UASB reactors, AMP/PMP ratios were evaluated to be 0.18, 0.12 and 0.13 for CUASB, TUASB and IUASB reactors respectively. This showed that the CUASB, TUASB and IUASB reactors were using only 18%, 12% and 13% of their potential acetoclastic methanogenic capacity respectively. These results can be interpreted that the three UASB reactors were underloaded compared with their potential acetoclastic methanogenic capacities. It was, therefore, recommended that the three UASB reactors should be loaded at higher organic loading rates or sludge withdrawn in order to maintain an AMP/PMP ratio of 0.6–0.7, which can ensure desired reactor performance with safer operation. Results of epifluoresence microscopic examinations showed that the percentage of total autofluorescent methanogens was approximately 30% of the total population in sludges from the TUASB and IUASB reactors whereas it was 20% in sludge from the CUASB reactor. The two UASB reactors treating raki distillery wastewaters contained sludges having a higher percentage of autofluorescent methanogenic population and higher acetoclastic methanogenic activity. Copyright © 2004 Society of Chemical Industry     

Improvement of enzymatic xylooligosaccharides production by the co-utilization of xylans from different origins

This study aimed to improve XOs production by enzymatic hydrolysis of xylans from various lignocellulosic waste biomasses namely corn cob, cotton and sunflower stalks, rice hull, wheat straw by using two commercial xylanase preparations, Shearzyme 500L and Veron 191. Shearzyme 500L showed better xylan hydrolysis capacity with high amount of xylose liberation. Xylobiose was the main hydrolysis product in each case. Even though the enzymatic hydrolyses using Shearzyme 500L resulted higher reducing sugar production compared to those of Veron 191, the hydrolysis of complex xylan structures was improved and the production of undesirable xylose was lowered by the co-utilization of xylanase preparations. By the co-utilization of xylanase preparations, the reducing sugar production from wheat straw, corn cob and sunflower stalk originated xylans was increased by 36%, 33% and 13%, respectively, compared to the expected reducing sugar yields. The highest reducing sugar production was obtained from complex corn cob xylan. The depolymerization of cotton and sunflower stalk xylan was poorest even though they have simple structures. Poor utilization of these xylans might be related to their high residual lignin content which might hinder the accessibility of xylan by the xylanases. However, the utilization of sunflower and cotton stalk xylan was improved when they were hydrolyzed within a xylan mixture containing equal amounts of each of five different xylans. In short, XOs production efficiency from agricultural waste materials was improved by the co-utilization of suitable xylanase and/or xylan mixtures considering the heterogeneous structures of xylan and different substrate specificities of xylanases.     

Phenol Removal through Chemical Oxidation using Fenton Reagent

In this study, phenol, aromatic, and non‐biodegradable organic matter were investigated and found to be removed from the model solution through chemical oxidation using Fenton reagent. The effects of the initial phenol concentration, hydrogen peroxide, and ferrous sulfate concentrations on the removal efficiency were investigated. Performance of the chemical oxidation process was monitored with phenol and COD (Chemical Oxygen Demand) analyses. In the experimental studies, phenol removal of over 98 % and COD removal of nearly 70 % were achieved. The optimum conditions for Fenton reaction both for initial phenol concentrations of 200 and 500 mg/L were found at a ratio [Fe²⁺]/[H₂O₂] (mol/mol) equal to 0.11. According to the results, chemical oxidation using Fenton reagent was found to be too effective, especially for phenol removal. However, this method has limited removal efficiency for COD.     

Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique

In recent years, laser beam welding has found wide applications in many industrial fields. Solidification cracks are one of the most frequently encountered welding defects that hinder obtaining a safe weld joint. Decades of research have shown that one of the main causes of such cracks are the strain and the strain rate. Obtaining meaningful measurements of these strains has always been a major challenge for scientists, because of the specific environment of the measurement range and the many obstacles, as well as the high temperature and the plasma plume. In this study, a special experimental setup with a high-speed camera was employed to measure the strain during the welding process. The hot cracking susceptibility was investigated for 1.4301 stainless steel, and the critical strain required for solidification crack formation was locally and globally determined.     

Reliability analysis of the complex mode indicator function and Hilbert Transform techniques for operational modal analysis

This study presents application of the CMIF and the Hilbert Transform techniques onto simulated response data obtained using a numerical model of a typical school building from Turkey. White noise is added to the data in order to achieve a noise to signal ratio of 5%. 100 Monte Carlo analysis sequences are carried out and the modal parameters (the frequencies, the mode shapes and the damping ratios) are identified at each Monte Carlo run for both techniques. The results are compared with the identifications obtained from the simulated data using stochastic subspace based system identification technique. The overall results of the study show that the mode shapes are clearly identified the best by using the CMIF technique. The damping ratios are estimated better by using the stochastic subspace based system identification technique whereas the frequencies are best determined by the CMIF. The results also show that both the CMIF and the Hilbert Transform techniques are sensitive to the type of window used as well as the averaging and the decimation process. It is apparent that the CMIF technique is as robust as the frequently used stochastic subspace based system identification technique and can be confidently used for modal parameter estimation of stiff low to mid rise reinforced concrete structures.