Retroviral display of antibody fragments; interdomain spacing strongly influences vector infectivity

Five different single-chain antibody fragments (scFv) against human cell-surface antigens were displayed on murine ecotropic retroviral vectors by fusing them to the Moloney SU envelope glycoprotein. The spacing between the scFv and the SU glycoprotein was varied by fusing the scFv to residue +7 or to residue +1 of Moloney SU and by inserting linker sequences of different lengths between the domains. All of the chimeric envelopes were efficiently incorporated into vector particles and could bind to human cells through their displayed antibody fragments, but did not infect them. The spacing between the scFvs and the SU glycoproteins had no significant effect on the efficiency of envelope expression or viral incorporation and did not affect the binding properties of the chimeric envelopes, nor did it influence the efficiency of targeted gene delivery to human cells by scFv-displaying vectors. However, on murine fibroblasts the infectivity of vectors incorporating the chimeric envelopes was strongly influenced by the length of the interdomain spacer. The titers were very low when the single-chain antibodies were fused through a tripeptide linker to SU residue +7 and were greatly enhanced (up to 10(5)-fold) when they were fused to SU residue +1 through a heptapeptide linker. These results point to the importance of steric interactions between the domains of chimeric envelope glycoproteins and may have implications for retroviral vector design for human gene therapy.     

Shunting neural network photodetector arrays in analog CMOS

This paper describes a custom analog CMOS photodetector array IC that exploits nonlinear lateral inhibition to achieve dynamic range compression, edge enhancement, and adaptation to mean input intensity. The neural net array architecture, characterized by nearest-neighbor connections and multiplicative cell interaction, is modeled after biological vision systems. The fabricated IC successfully implements a portion of the compact and powerful nonlinear signal processing performed in the outer layers of the vertebrate retina. Measured results are presented for an optical input intensity range of nearly six decades. A scanning architecture that allows for preferential directional sensitivity is also demonstrated. Measured data agree well with models created using a spreadsheet program     

Variability for oil and fatty acid composition in castorbean varieties

Thirty-six castorbean varieties were surveyed for oil and fatty acid composition, in order to determine variability of these seed compounds. A large variability of seed oil percentage was observed, ranging from 39.6 to 59.5%. Concerning the fatty acids, little variability was observed for ricinoleic acid, which was the most abundant in the oil, ranging from 83.65 to 90.00%. The other fatty acids appeared in small concentrations and showed a small range: 0.87 to 2.35, 0.68 to 1.84, 2.96 to 5.64, 3.19 to 5.98, and 0.34 to 0.91%, for palmitic, stearic, oleic, linoleic, and linolenic acid, respectively. Non-significant correlations were observed between fatty acids and seed oil percentage. However, significant correlations were observed among fatty acid concentrations: positive and negative ones. These significant correlations could be associated with the biosynthetic pathways of the fatty acids, which are not fully elucidated. They suggest, however, that selection for a particular fatty acid will tend to increase those positively correlated, and decrease those negative ones. Selection and plant breeding techniques could then be applied to modify the oil content of the castorbean seeds, considering the variability observed. For the fatty acid composition, however, the variability was not large enough to make substantial changes in their concentrations by selection procedures. More varieties should be surveyed to find out if such variability is available.     

An Historical Perspective on the Administration of Water in Brazil

Abstract

This article focuses on two instruments of water resources management—charging for water and reallocation of water use through a water market. Charging for water in nature has been practiced for centuries in some cases. On the other hand, a culture of free access to water was dominant in most countries during ancient times. An historical review of the charging of water and its administration is presented. The article covers the time of ancient Rome to the present. A current example is the model practiced in the semi-arid region of Ceará State in northeast Brazil. Regarding water use reallocation by a water market, as an alternative to improve water efficiency, the experience presented comes from the south of Ceará State one century ago. Based on past experience, the article then presents a model to implement a water market bounded in space to an irrigation district, and in time to periods of water deficit in reservoirs. Six prerequisites of market-based transfers of water are analyzed, and it is shown that in the proposed model they can be addressed.     

Corrosion resistance of anodic oxides on the Ti-50Zr and Ti-13Nb-13Zr alloys

Electrochemical analyses on the biocompatible alloys Ti-50Zr and Ti-13Nb-13Zr, as-cast and heat-treated, in distinct electrolytes (simulating or not physiological media: pH 7, Ringer, PBS, phosphate buffer and Na₂SO₄ solutions; pH 1, H₂SO₄, HNO₃, CH₃SO₃H, HClO₄ and H₃PO₄ solutions) are reported. Analyses of the open-circuit potential values indicated that either as-cast or heat-treated samples of both alloys present the same tendency to spontaneously form an oxide film on their surfaces and that the oxide grown in the Na₂SO₄ solution presents better protection characteristics than those formed in the phosphate buffer, Ringer and PBS solutions, in this order. Cyclic voltammograms obtained in the Ringer and PBS solutions showed that the Ti-13Nb-13Zr alloy does not transpassivate up to potentials of 8 V (versus SCE), while the Ti-50Zr alloy presents corrosion at potentials lower than 2 V (versus SCE), indicating that this alloy is less resistant to corrosion in solutions simulating physiological conditions. The obtained pit potential values showed that the heat treatment has very little influence on the corrosion behavior of the alloys. Finally, both alloys did not present transpassivation at potentials up to 8 V (versus SCE) in the H₂SO₄, HNO₃, CH₃SO₃H and H₃PO₄ solutions; however, when immersed in the HClO₄ solution the Ti-50Zr alloy underwent pit corrosion while the Ti-13Nb-13Zr alloy remained corrosion resistant in this potential range.     

Cholesterol and fatty acids profile of Brazilian commercial chicken giblets

This study was carried out to determine the chemical composition, cholesterol contents and fatty acids profile of Brazilian commercial chicken giblets. The analysis were performed in gizzard, liver and heart in natura and also in cooked gizzard, fried liver and roasted heart. Fat and cholesterol contents ranged from 0.88% and 72.68 mg/100 g, in cooked gizzard, to 22.19% and 213.18 mg/100 g, in roasted heart. As the fat content gets higher, so does the cholesterol content. Palmitic (C16:0) and stearic acids (C18:0) were the predominant saturated fatty acids (SFA). The C16:0 ranged from 6.39% in cooked gizzard to 18.51% in fried liver. The C18:0 level ranged from 6.62% in roasted heart to 19.19% in cooked gizzard. Linoleic acid (C18:2 omega 6) was the predominant polyunsaturated fatty acid (PUFA). The data revealed that the three different analysed giblets presented a good PUFA/SFA ratio, with values of 1.11, 1.14 and 1.40 for cooked gizzard, fried liver and roasted heart, respectively.     

Low-dispersion turns and junctions for microchannel systems

Numerical methods are employed to optimize the geometry of two-dimensional microchannel turns such that the turn-induced spreading of a solute band is minimized. An inverted numerical method is first developed to compute the electric potential and local species motion in turns of arbitrary geometry. The turn geometry is then optimized by means of a nonlinear least-squares minimization algorithm using the spatial variance of the species distribution leaving the turn as the object function. This approach yields the turn geometry producing the minimum possible dispersion, subject only to prescribed constraints. The resulting low-dispersion turns provide an induced variance 2-3 orders of magnitude below that of a comparable conventional turns. Sample results are presented for 180 and 90 degrees turns, and the use of these turns to form wyes and tees is discussed. A sample 45 degrees wye is presented. The use of low-dispersion turns in folding separation columns is also discussed, and sample calculations are presented for folding a column 100 microm in width and up to 900 mm in length onto a region of only 10 by 10 mm. These low-dispersion geometries are applicable to electroosmosis, electrophoresis, and some pressure-driven flows.     

Investigation of Liquidus Temperatures and Phase Equilibria of Copper Smelting Slags in the FeO-Fe2O3-SiO2-CaO-MgO-Al2O3 System at PO2 10?8?atm

Copper concentrates and fluxes can contain variable levels of SiO₂, CaO, and MgO in addition to main components Cu, Fe, and S. Metal recovery, slag tapping, and furnace wall integrity all are dependent on phase equilibria and other properties of the phases and are functions of slag composition and operational temperature. Optimal control of the slag chemistry in the copper smelting, therefore, is essential for high recovery and productivity; this, in turn, requires detailed knowledge of the slag phase equilibria. The present work provides new phase equilibrium experimental data in the FeO-Fe₂O₃-SiO₂-CaO-MgO-Al₂O₃ system at oxygen partial pressure of 10⁻⁸ atm within the range of temperatures and compositions directly relevant to copper smelting. For the range of conditions relevant to the Kennecott Utah Copper (South Magna, UT) smelting furnace, it was confirmed experimentally that increasing concentrations of MgO or CaO resulted in significant decreases of the tridymite liquidus temperature and in changes in the position of the tridymite liquidus in the direction of higher silica concentration; in contrast, the spinel liquidus temperatures increase significantly with the increase of MgO or CaO. Olivine and clinopyroxene precipitates appeared at high MgO concentrations in the liquid slag. The liquidus temperature in the spinel primary phase field was expressed as a linear function of 1/(wt pctFe/wt pctSiO₂), wt pctCaO, wt pctMgO, and wt pctAl₂O₃. The positions of each of the liquidus points (wt pctFe)/(wt pctSiO₂) at a fixed temperatures in the tridymite primary phase field were expressed as linear functions of wt pctCaO, wt pctMgO, and wt pctAl₂O₃.     

Integrating natural language understanding with document structure analysis

Document understanding, the interpretation of a document from its image form, is a technology area which benefits greatly from the integration of natural language processing with image processing. We have developed a prototype of an Intelligent Document Understanding System (IDUS) which employs several technologies: image processing, optical character recognition, document structure analysis and text understanding in a cooperative fashion. This paper discusses those areas of research during development of IDUS where we have found the most benefit from the integration of natural language processing and image processing: document structure analysis, optical character recognition (OCR) correction, and text analysis. We also discuss two applications which are supported by IDUS: text retrieval and automatic generation of hypertext links