Thermal and thermoelastic properties of fast extrusion furnace (FEF) carbon black loaded SBR vulcanizates

The effect of FEF carbon black as filler on the thermal capacity c, diffusivity a, and thermal conductivity λ, of styrene butadiene rubber (SBR) composites in the temperature range 300–420 K was studied. The filler strongly increases the thermal diffusivity, whilst strongly decreasing the thermal capacity and the thermal conductivity (except at high FEF content ≥80 phr). The influence of the filler on the thermoelastic behaviour of the same composites was also investigated. It was found that the thermoelastic temperature change (ΔT) increased with carbon black concentration as well as the entropy change per unit extension.     

Cotton Seed Oil Oxidation Catalysed by Amino Acids and Albumin in Aqueous and Non-Aqueous Media

The oxidation of refined cotton seed oil catalysed by various α-amino acids and albumin have been studied in aqueous and non-aqueous media. Cysteine, phenylalanine and albumin possessed pro-oxidant effect in cotton seed oil in aqueous and non-aqueous media. Serine exhibited pro-oxidant activity in aqueous media and minor anti-oxidant effect in non-aqueous media. The effectiveness of the amino acids on cotton seed oil oxidation was in the following descending order in both aqueous and non-aqueous media: cysteine > phenylalanine > serine. The pro-oxidant effect in aqueous media might be due to the predominant presence of the protonated amino nitrogen. Whilst, amino acid-metal complex might be responsible for the pro-oxidant effect in non-aqueous media.     

Chemical factors affecting soiling and soil release from cotton-containing durable press fabric. VIII. Grafting of polyester/cotton blend fabrics with carboxyl-containing polymer

Fabric samples of polyester/cotton blend were graft copolymerized to different levels (add-ons) with poly(acrylic acid) and poly(methacrylic acid) using the mutual γ-irradiation technique and the Fe²⁺–H₂O₂ redox system, respectively. The copolymers so obtained were given durable press treatments with and without conventional nonionic softener using DMDEU as the crosslinking agent. The susceptibility of the copolymers before and after crosslinking to aqueous and nonaqueous oily soiling and their ability to release the soils were examined. It was found that hydrophilization of the surface of polyester/cotton blend through grafting with the said carboxyl-containing polymers brings about a significant improvement in the resistance of the blend to aqueous and nonaqueous oily soil particularly after crosslinking in presence of nonionic softener. A certain improvement in the ease of oily soil removal could be achieved by grafting. The opposite holds true for aqueous soil release. Soiling and soil release depends on the magnitude and method of grafting, medium of soiling, as well as the formulation of crosslinking treatments. The effect of grafting on some properties of the blend fabric before and after crosslinking was also examined.     

Micro-engineered first wall tungsten armor for high average power laser fusion energy systems

The high average power laser program is developing an inertial fusion energy demonstration power reactor with a solid first wall chamber. The first wall (FW) will be subject to high energy density radiation and high doses of high energy helium implantation. Tungsten has been identified as the candidate material for a FW armor. The fundamental concern is long term thermo-mechanical survivability of the armor against the effects of high temperature pulsed operation and exfoliation due to the retention of implanted helium. Even if a solid tungsten armor coating would survive the high temperature cyclic operation with minimal failure, the high helium implantation and retention would result in unacceptable material loss rates. Micro-engineered materials, such as castellated structures, plasma sprayed nano-porous coatings and refractory foams are suggested as a first wall armor material to address these fundamental concerns. A micro-engineered FW armor would have to be designed with specific geometric features that tolerate high cyclic heating loads and recycle most of the implanted helium without any significant failure. Micro-engineered materials are briefly reviewed. In particular, plasma-sprayed nano-porous tungsten and tungsten foams are assessed for their potential to accommodate inertial fusion specific loads. Tests show that nano-porous plasma spray coatings can be manufactured with high permeability to helium gas, while retaining relatively high thermal conductivities. Tungsten foams where shown to be able to overcome thermo-mechanical loads by cell rotation and deformation. Helium implantation tests have shown, that pulsed implantation and heating releases significant levels of implanted helium. Helium implantation and release from tungsten was modeled using an expanded kinetic rate theory, to include the effects of pulsed implantations and thermal cycles. Although, significant challenges remain micro-engineered materials are shown to constitute potential candidate FW armor materials.     

Optimal placement of multiple STATCOM for voltage stability margin enhancement using particle swarm optimization

This paper proposes an approach for optimal placement of STATic synchronous COMpensator (STATCOM) in power systems. The approach is based on the simultaneous application of particle swarm optimization (PSO) and continuation power flow (CPF) to improve voltage profile, minimizing power system total losses, and for maximizing system loadability with respect to the size of STATCOM. Simulation results show the suitability of the PSO technique in finding multiple optimal solutions to the problem with reasonable computational effort. The installation of the STATOCM on these buses can increase the system voltage stability margin. The proposed technique is examined on the IEEE57 bus test system.     

Proactive control of cresting in homogeneous oil reservoirs: an experimental study

This paper sets out to investigate experimentally the use of electromagnetic valves in controlling production of water during cresting from homogeneous non-fractured thick-oil and thin-oil reservoirs, based on the principle of capillarity and breakthrough time. A time half the initial breakthrough times was preset for the electromagnetic valve to close. The valve closed almost immediately at the set time thereby shutting oil production temporarily, causing the water and gas height levels to recede by gravity and capillarity with receding reservoir pressure. The efficiency of this technique was compared with an uncontrolled simulation case, in terms of cumulative oil, oil recovery and water produced at the same overall production time. From the results obtained, higher percentages in oil produced and water reduction were observed in the cases controlled proactively, with a 3.6% increase in oil produced and water reduction of 10.0% for thick-oil rim reservoirs, whereas only a small increment in oil produced (0.7%) and a lower water reduction of 1.03% were observed for the thin-oil rim reservoirs. Hence, the effectiveness of the cresting control procedure depends on the oil column height of the reservoir.     

Real-time quality authentication of honey using atmospheric pressure chemical ionisation mass spectrometry (APCI-MS)

The aim of this study was to use gas chromatography-mass spectrometry (GC-MS) and APCI-MS techniques to detect adulteration in honey. The key volatile compounds in the headspace of the adulterated honey were marked by GC-MS and their representative fragment ions were utilised in scanning honey samples using the real-time APCI-MS system. The PLS models validated using independent data sets resulted in coefficient of the determination () of 0.97 and 0.96 and root mean square error in prediction (RMSEP) of 2.62 and 2.45 for the GC-MS and APCI-MS data sets respectively. The most efficient volatiles from GC-MS analysis and their corresponding fragment ions m/z from APCI-MS data analysis were then identified and used to develop new PLS models to predict the level of adulteration. The best PLS model gave of 0.95 and RMEP of 2.60% in the independent validation set indicating that the model was very accurate in predicting the level of adulteration.