Clinical trial results support a preference for using CLA preparations enriched with two isomers rather than four isomers in human studies

CLA mixtures are now commercially available. They differ from each other with respect to their content of CLA isomers and their degree of purification. As a group of natural FA, CLA have been widely assumed to be safe. However, the suspected presence of both impurities and particular isomers might induce undesirable side effects. Despite this potential health risk, only a few CLA preparations have been tested under rigorous conditions for clinical efficacy and safety. Based on the limited results available, it is possible to suggest that preparations enriched in c9,t11 and t10,c12 isomers are preferable for human consumption compared to preparations containing four isomers, in terms both of safety and efficacy.     

Proteomic studies in animal models of diabetes

The aim of this review is to provide an overview of proteomic studies in animal models of diabetes and to give some insight into the different methods available today in the rapidly developing field of proteomics. A summary of 31 papers published between 1997 and 2007 is presented. For instance, proteomics has been used to study the development of both type 1 and type 2 diabetes, diabetic complications in tissues like heart, kidney and retina and changes after treatment with anti-diabetic drugs like peroxisome proliferator-activated receptors agonists. Together, these studies give a good overview of a number of experimental approaches. Proteomics holds the promise of providing major contributions to the field of diabetes research. However, to achieve this, a number of issues need to be resolved. Appropriate data representation to facilitate data comparison, exchange, and verification is required, as well as improved statistical assessment of proteomic experiments. In addition, it is important to follow up the results with functional studies to be able to make biologically relevant conclusions. The potential of proteomics to dissect complex human disorders is now beginning to be realized. In the future, this will result in new important information concerning diabetes.     

The effect of flooring on musculoskeletal symptoms in the lower extremities and low back among female nursing assistants

This study examines the effect of changing the floor from a 2-mm homogenous vinyl floor to a 4-mm heterogeneous vinyl floor (1.5-mm wear layer and 2.5-mm foam layer) on musculoskeletal symptoms in the lower extremities and low back among nursing assistants in a geriatric care centre. A pre-post design with a reference group consisting of nursing assistants from a similar geriatric care centre was used. Follow-up measurements were carried out 12 and 24 months after the intervention by means of questionnaires. At the 1-year follow-up, the pain intensity score in the feet of the intervention group had decreased compared with the baseline value and remained statistically significant at the 2-year follow-up. The decrease in pain intensity score of the feet in the intervention group was statistically significantly different from the reference group, both after 1 and 2 years. PRACTITIONER SUMMARY: The results show the importance of flooring in the workplace with regard to reducing musculoskeletal symptoms. Appropriate flooring is especially important in the female-dominated health care sector, where workers must stand or walk for long periods.     

Extrusion of silicon-rich AlMgSi alloys

As a part of on-going research on phase transformations during the deformation of light alloys, the effect of silicon excess on the extrudability and mechanical properties of the standard AlMgSi1 alloy within AA6082 alloy is investigated in this study. The AlMgSi1 alloy and three experimental aluminum alloys with a silicon content of 1.98%, 3.73% and 5.51% were direct-chilled cast into billets 95 mm in diameter, homogenized at 540 °C for 4 h and extruded into 12 mm diameter rods at different extrusion speeds. The results showed that an increase in the silicon content reduced the extrudability of the AlMgSi1 alloy by lowering the limiting extrusion speed. However, the extruded alloys with 3.73% and 5.51% silicon, generally characterized by a fine grained microstructure, exhibited higher strength levels compared with the 1.98% silicon alloy. Nonetheless, the mechanical properties of these alloys, in the T6 temper condition, were below those of the AlMgSi1 base alloy.     

Trace Elements in the Si Furnace-Part II: Analysis of Condensate in Carbothermal Reduction of Quartz

Silicon feedstock for production of solar-grade silicon should be as pure as possible to decrease the cost of manufacturing of solar cells. Impurities in quartz, carbonaceous materials, electrodes, and refractories are mostly present in the form of oxides. These oxides can be reduced to volatile gaseous compounds in presence of SiO(g) and CO(g) atmosphere and potentially leave the furnace or stay in the condensed reaction products, metal, and slag. This work investigates the conditions under which volatile impurities report to the gas phase in laboratory experiments with lumpy and pelletized mixtures of SiO₂, SiC, and Si at 1923 K and 2123 K (1650 °C and 1850 °C), respectively, were carried out. The volatile compounds were generated by the reduction of quartz and collected in the form of condensate. The effects of the reaction temperature, quartz type, charge composition, pellets, and lumps on the composition of the condensate were studied. The trace elements in the charge input, reacting charge, and condensate were analyzed using inductively coupled plasma (ICP)-mass spectroscopy (MS) and X-ray diffraction (XRD). CO(g) and SiO(g), which are the major components in reduction reactions, formed four types of condensate: white, brown, green, and orange. The condensate constituents were amorphous SiO₂, 3C:SiC, Si, and α-quartz. Each impurity present in the quartz charge entered the gas phase during quartz reduction and was detected in the condensate. Al and Fe show limited volatility. The volatility of Mn, P, and B depends on the charge mix: a higher P_CO enhances the concentration of these elements in the gas phase. Fluid inclusions, common in hydrothermal quartz, enhance the distribution of the contaminants to the gas phase. Industrial campaigns on Si and Fe-Si production confirm the experimental results.     

Utilizing identity-by-descent probabilities for genetic fine-mapping in population based samples, via spatial smoothing of haplotype effects

Genetic fine mapping can be performed by exploiting the notion that haplotypes that are structurally similar in the neighbourhood of a disease predisposing locus are more likely to harbour the same susceptibility allele. Within the framework of Generalized Linear Mixed Models this can be formalized using spatial smoothing models, i.e. inducing a covariance structure for the haplotype risk parameters, such that risks associated with structurally similar haplotypes are dependent. In a Bayesian procedure a local similarity measure is calculated for each update of the presumed disease locus. Thus, the disease locus is searched as the place where the similarity structure produces risk parameters that can best discriminate between cases and controls.From a population genetic perspective the use of an identity-by-descent based similarity metric is theoretically motivated. This approach is then compared to other more intuitively motivated models and other similarity measures based on identity-by-state, suggested in the literature.     

Effect of solid hold-up on nitrite accumulation in a biofilm reactor--molecular characterization of nitrifying communities.

Biological ammonium oxidation was carried out in two inverse turbulent bed reactors fed with synthetic mineral wastewater containing a high ammonium concentration (100 mg N-NH4+/L). Both reactors were started-up and operated in the same conditions except for the solid carrier concentration: the solid hold-up ratios applied, defined as the ratios of static to expanded bed height, were 0.1 and 0.3 in reactors R10 and R30 respectively. These two solid hold-up ratios generate different particle-to-particle collision frequencies and, therefore, detachment forces. The influence of solid hold-up on biofilm growth and nitrifying performance was studied from a macroscopic (i.e. nitrate and/or nitrite production) and microbiological point of view. After 60 days of operation, both reactors contained the same amount of biomass. However, R10 produced only nitrate while nitrite accumulated in R30. A comparison of microbial populations in the reactors showed that R10 contained both ammonium and nitrite oxidizing populations such as Nitrosomonas and Nitrospira, whereas in R30, ammonium oxidizing populations were much greater than those of nitrite oxidizers. The major ammonium-oxidizing organism was not the same in both reactors.     

Proteome Based Approach Defines Candidates for Designing a Multitope Vaccine against the Nipah Virus

Nipah virus is one of the most harmful emerging viruses with deadly effects on both humans and animals. Because of the severe outbreaks, in 2018, the World Health Organization focused on the urgent need for the development of effective solutions against the virus. However, up to date, there is no effective vaccine against the Nipah virus in the market. In the current study, the complete proteome of the Nipah virus (nine proteins) was analyzed for the antigenicity score and the virulence role of each protein, where we came up with fusion glycoprotein (F), glycoprotein (G), protein (V), and protein (W) as the candidates for epitope prediction. Following that, the multitope vaccine was designed based on top-ranking CTL, HTL, and BCL epitopes from the selected proteins. We used suitable linkers, adjuvant, and PADRE peptides to finalize the constructed vaccine, which was analyzed for its physicochemical features, antigenicity, toxicity, allergenicity, and solubility. The designed vaccine passed these assessments through computational analysis and, as a final step, we ran a docking analysis between the designed vaccine and TLR-³ and validated the docked complex through molecular dynamics simulation, which estimated a strong binding and supported the nomination of the designed vaccine as a putative solution for Nipah virus. Here, we describe the computational approach for design and analysis of this vaccine.