Effect of fortification with asparagus powder on the qualitative properties of processed cheese

The qualitative properties of processed cheese (PC) fortified with different levels of asparagus powder (AP) (0.5%, 1% and 1.5% wt/wt) were evaluated during storage. AP decreased the pH and lipolysis indexes and increased the phenolic content, antioxidant activity and proteolysis of the processed cheeses. AP made the structure of the cheese more elastic, increased the rigidity and decreased the spreadability compared with the control sample, which corresponded to the results obtained using dynamic oscillatory rheometry. The results showed that AP as a rich source of bioactive components could be used for the fortification of processed cheeses.     

Mechanisms of orientational and photoelastic birefringence generation of methacrylates for the design of zero–zero‐birefringence polymers

The intrinsic birefringence Δn⁰ and photoelastic coefficient C of poly(methyl methacrylate), poly(2,2,2‐trifluroethyl methacrylate), poly(phenyl methacrylate), and poly(2,2,3,3,3‐pentafluorophenyl methacrylate) were determined. We categorized these methacrylate polymers into four birefringence‐types, even though their molecular structures differed only by the substituents on the side chains. Based on the results of Δn⁰ and C, novel polymers that exhibit neither orientational nor photoelastic birefringence, i.e., zero–zero‐birefringence polymers, were designed and synthesized by quaternary copolymerization system. Furthermore, we confirmed that the mechanisms of orientational birefringence and photoelastic birefringence generation were different in these methacrylate polymers. The conformation of the repeat unit of the polymers was nearly constant during the generation of orientational birefringence. In contrast, the conformation of the repeat unit of the polymers changed during the generation of photoelastic birefringence in the glassy state. These findings demonstrated the reasonability of evaluating orientational and photoelastic birefringence separately, as well as the adequacy of the classification of polymers into four birefringence‐types. Given these results and the fact that zero–zero‐birefringence polymers could be prepared successfully by four‐birefringence type monomers, we demonstrated the reasonability of the method for designing the zero–zero‐birefringence polymers. POLYM. ENG. SCI., 55:1330–1338, 2015. © 2015 Society of Plastics Engineers     

Two-dimensional ultrasonic tomography in nondestructive evaluation by using area functions

It is shown that the (normalized) area function based on the Born approximation offers a simple connection between the ultrasonic scattering response and the monochromatic ray sum in X-ray CT (computerized tomography). Because of this simple association, it is possible to apply the ultrasonic signals in the computationally direct and efficient parallel-beam X-ray CT algorithm to reproduce the vertical thickness function of an ultrasonic scatterer. The development of this imaging methodology is demonstrated for flaws of simple geometry; theoretical as well as experimental results for two model scatterers using this imaging technique are reported. Specifically, the area functions for a two-to-one spheroid and a circular cylinder are calculated and applied to a filtered backprojection algorithm of X-ray CT to obtain the vertical thickness function images. These images are then compared with the true vertical thickness functions of the targets based on their geometry. With theoretical data, this method was found to work very well. Even when experimental data containing creeping waves were used, the method produced satisfactory results for objects with continuously smooth surface.     

A comparative study of two approaches for supporting optimal network location queries

Given a set S of sites and a set O of weighted objects, an optimal location query finds the location(s) where introducing a new site maximizes the total weight of the objects that are closer to the new site than to any other site. With such a query, for instance, a franchise corporation (e.g., McDonald’s) can find a location to open a new store such that the number of potential store customers (i.e., people living close to the store) is maximized. Optimal location queries are computationally complex to compute and require efficient solutions that scale with large datasets. Previously, two specific approaches have been proposed for efficient computation of optimal location queries. However, they both assume p-norm distance (namely, L₁ and L₂/Euclidean); hence, they are not applicable where sites and objects are located on spatial networks. In this article, we focus on optimal network location (ONL) queries, i.e., optimal location queries in which objects and sites reside on a spatial network. We introduce two complementary approaches, namely EONL (short for Expansion-based ONL) and BONL (short for Bound-based ONL), which enable efficient computation of ONL queries with datasets of uniform and skewed distributions, respectively. Moreover, with an extensive experimental study we verify and compare the efficiency of our proposed approaches with real world datasets, and we demonstrate the importance of considering network distance (rather than p-norm distance) with ONL queries.     

On the stability issues of switched singular time‐delay systems with slow switching based on average dwell‐time

The issue of exponential stability analysis of continuous‐time switched singular systems consisting of a family of stable and unstable subsystems with time‐varying delay is investigated in this paper. It is very difficult to analyze the stability of such systems because of the existence of time‐delay and unstable subsystems. In this regard, on the basis of the free‐weighting matrix approach, by constructing the new Lyapunov‐like Krasovskii functional, and using the average dwell‐time approach, delay‐dependent sufficient conditions are derived and formulated in terms of LMIs to check the exponential stability of such systems. This paper also highlights the relationship between the average dwell‐time of the switched singular time‐delay system, its stability, exponential convergence rate of differential states, and algebraic states. Finally, a numerical example is given to confirm the analytical results and illustrate the effectiveness of the proposed strategy. Copyright © 2012 John Wiley & Sons, Ltd.     

An Approach to Synthesize Thick α- and γ-Al2O3 Coatings by High-Speed Physical Vapor Deposition

Crystalline α- and γ-Al₂O₃ exhibit in many applications high wear resistance, chemical resistance, and hot hardness, making them interesting materials for production engineering. To synthesize α-Al₂O₃ with high coating thickness of s ≥ 10 μm, chemical vapor deposition at temperatures T > 1000 °C is well established. However, there are almost no studies dealing with the synthesis of thick α-Al₂O₃ by physical vapor deposition (PVD) at high temperatures T > 700 °C. High-temperature deposition of thick coatings can be realized by means of the dense hollow cathode plasma, combined with the transport function of the plasma gas in high-speed (HS) PVD. Herein, crystalline α- and γ-Al₂O₃ films are deposited on cemented carbides at substrate temperatures T _s ≈ 570 °C and T _s ≈ 780 °C by HS-PVD. These coatings exhibit a thickness up to s = 20 μm. Moreover, phase analysis presents α-phases in coatings synthesized at substrate temperature of T _s ≈ 780 °C with significant higher hardness than films by T _s ≈ 570 °C. These release the potential of HS-PVD to synthesize α-Al₂O₃ coatings with high thickness. Thereby, a higher thickness of these coatings is beneficial for the wear protection of turning and die casting tools.     

In-plane and out-of-plane buckling of arches made of FGM

The mechanical buckling of curved beams made of functionally graded materials is studies in this paper. The equilibrium and stability equations of curved beams under mechanical loads are derived. Using proper approximate functions for the displacement components, the stability equations are employed to obtain the related eigenvalues associated with the buckling load of the curved beam. Closed-form solutions are obtained for mechanical buckling of curved beams with doubly symmetric cross section subjected to uniform distributed radial load and pure bending moment. The results are validated with the known data in the literature for beams with isotropic materials.     

Preparation and study of a thermo-responsive membrane using binary liquid crystal mixtures of cholesteryl cetyl ether and cholesteryl oleyl carbonate

A facile method for the synthesis of thermotropic liquid crystalline cholesteryl cetyl ether (CCE) was carried out from cholesterol and cetyl alcohol using montmorillonite K-10 as an acid catalyst. The aim of this study was to investigate the use of liquid crystalline blends of CCE and cholesteryl oleyl carbonate (COC) with appropriate crystal to smectic phase temperature (T _c?Cs) just above body temperature as a temperature-modulated drug permeation system. Using 30/70?mol ratio of COC/CCE, a mixture of desirable phase transition temperature was obtained. The phase transition behavior of COC/CCE binary liquid crystalline mixture was established by differential scanning calorimetry and polarizing optical microsopy. The COC/CCE-embedded cellulose nitrate membrane was used by an in vitro drug penetration studies. Paracetamol and mesalazine were chosen as hydrophobic and hydrophilic drug models, respectively. Paracetamol permeability through the membrane was higher at temperatures above the phase transition of liquid crystal (LC) blends (39?°C) than its permeability below the phase transition temperature of liquid crystal blends (30?°C). The drug penetration through LC-embedded cellulose membrane was influenced by the pore size of the membrane and therefore the adsorbed amount of LC. There was no penetration of mesalazine through that membrane presumably, due to the differences in hydrophilicity of LC-embedded membrane and permeated drug.