OFDM peak power reduction with simple amplitude predistortion

In this paper, we propose a new peak-to-average power ratio (PAPR) reduction algorithm for OFDM transmission. The algorithm is based on simple amplitude predistortion of a subset of the input symbol blocks, the predistorted symbols being selected according to a metric which measures their contribution to the output signal samples of large. magnitude. This metric-based algorithm is simple, highly flexible, and can be implemented as a one-shot process, although its performance can be further improved by iterating the process one or more times.     

Inhibition of atmospheric corrosion of mild steel by sodium benzoate treatment

The objective of this study was to evaluate the effectiveness of sodium benzoate as an inhibitor to slow down or prevent atmospheric corrosion/discoloration of the local mild steel during storage in the Arabian Gulf region. Test specimens were prepared from locally produced reinforcing steel products. The inhibitor solution was applied on steel specimens at a concentration of 100 mM for 1 day at room temperature. Wooden exposure racks were used to hold as-received and inhibitor-treated specimens during atmospheric exposure for different periods. Corrosion was evaluated through weight loss determination and electrochemical technique. As expected, the Arabian Gulf atmosphere was corrosive on the as-received local mild steel. On the other hand, treatment of steel with sodium benzoate lowered its corrosion rate during initial days of its exposure to atmosphere. However, atmospheric corrosion inhibition performance of sodium benzoate deteriorated with exposure time after 30 or more days of atmospheric exposure, and the corrosion rates of sodium benzoate-treated specimens reached that of the unprotected specimens at the end of 90 days of atmospheric exposure.     

HiSQL: A Front-end Query System for Historical Relational Databases

The paper describes a prototype system called HiSQL (Historical SQL) which extends the functionality of SQL in manipulating historical data, by providing functions for spatial and temporal processing. Conceptually the paper is divided into three parts: the first part deals with the design and architecture of the system; the second part introduces a case study (the defters); and the third part describes specific functions for spatial and temporal processing of serial documents. The paper concludes with a comparison between HiSQL and SQL and suggestions for further work. This revised version was published online in August 2006 with corrections to the Cover Date.     

Exact solution of elasto-plastic stresses in a metal-matrix composite beam of arbitrary orientation subjected to transverse loads

An analytical elasto-plastic stress analysis is presented for a metal-matrix composite beam of arbitrary orientation subjected to a single transverse force applied to the free end of the beam and a uniformly distributed load. The material is assumed to be perfectly plastic in the elasto-plastic solution. A composite consisting of stainless-steel-reinforced aluminum was produced for this work. Sample problems are given for various orientation angles. Elastic, elastoplastic and residual normal and shear stresses are calculated. The location of the elasto-plastic boundary of the beam is obtained according to the x coordinates of the beam.     

Potential of microbial growth control in water hydraulic systems by UV‐irradiation and filtration

Water hydraulic systems use water as a pressure medium and, thus, do not pose such adverse environmental impacts as oil hydraulics. Microbial deterioration of the pressure medium and biofouling of the surfaces restrict the applicability of the water‐based technology. The potential of microbial growth control by UV‐irradiation and filtration was studied in a pilot‐scale water hydraulic system. The UV‐irradiation (25 m Ws cm^?2) of the pressure medium reduced the total viable counts of bacteria by 1–2 log₁₀ cfu cm^?3, whereas the total microbial cell numbers and the numbers of surface‐attached microorganisms remained unaffected. Prefiltration (1.2 µm, absolute) of the pressure medium decreased the total microbial cell number in the water phase and retarded the attachment of bacteria. The filtration during the operation (2 µm, absolute) decreased the total numbers of microbial cells and the total viable counts in the pressure medium, and microbial attachment on the surfaces. Microbial attachment was not prevented by filtration. The microbial water quality obtained by pre‐ and on‐line filtration of the pressure medium was sufficient to ensure the long‐term operation of the water hydraulic system assuming that clean work practices are complied with in assembly and during the operation. © 2002 Society of Chemical Industry     

NMR imaging and differential scanning calorimetry study on drying of pine,birch, and reed pulps and their mixtures

Drying, water fractions, and water distribution were investigated for pine, birch, and reed pulps and pine–birch, pine–reed, and pine–birch–reed pulp mixtures. Gravimetrically determined drying times showed that the drying rates of the pulps decreased at two to four inflection points. Characterizations of the dried pulps by differential scanning calorimetry (DSC) showed a faster removal of free water than freezing and nonfreezing bound waters; all decreased simultaneously, however. DSC also revealed the critical water contents at which the free water and freezing bound water disappeared. The gravimetrically determined inflection points of the drying curves corresponded with the critical points determined by DSC. NMR line widths and images produced by ¹H‐NMR imaging revealed the nature and regions of the pulp drying. The constant growth rate of the NMR line widths with decreasing water content appeared to change at two inflection points, which fell approximately in the same water content regions as the inflection points of the drying curves. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 937–945, 2006     

Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Influences of 2.5wt% Mn addition on the microstructure and mechanical properties of Cu-Al-Ni shape memory alloys

The influences of 2.5wt%Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy(SMA) were studied by means of scanning electron microscopy(SEM),transmission electron microscopy(TEM),and differential scanning calorimeter(DSC).The experimental results show that Mn addition influences considerably the austenite-martensite transformation temperatures and the kind of martensite in the Cu-Al-Ni alloy.The martensitic transformation changes from a mixedβ_1→β'_1...