Effects of post annealing on removal of defect states in silicon oxynitride films grown by oxidation of silicon substrates nitrided in inductively coupled nitrogen plasma

Ultra thin (5 nm) silicon oxynitride (SiON) films were fabricated at a low temperature using nitrogen plasma generated by an inductively coupled plasma system. Effects of post-metalization annealing (PMA) of Al/SiON/Si MOS structure on the electrical properties of the SiON films were studied and correlations between the charge trapping states and the leakage current were established. Positive charge trapping by interface states generated by plasma damage was characterized by the hysteresis in high-frequency capacitance-voltage (C-V) characteristics. Hysteresis was observed to be completely removed by PMA while interface state density at the Si mid band gap reduced from 2.2×10¹³ to 3.7×10¹¹/eV/cm² and the oxide fixed charge density changed from 3.3×10¹² to −4×10¹¹/cm². The leakage current also decreased significantly, by more than two orders of magnitude, with PMA. The analysis of the leakage current using trap assisted tunneling (TAT) mechanism indicated that with PMA, the trap energy level in the SiON film becomes shallower from 1.3 to 0.7 eV. The positive trapped charges were observed to be annihilated by PMA and the trapping sites became neutral trap centers in the SiON film. This could lead to the reduction in the leakage current component given rise to by TAT.     

Modeling the effects of hypoglycemia on a two-choice task in adult humans.

Objective: Previous research has demonstrated that hypoglycemia causes reaction times to be slower and more variable. Reaction time tests, however, use multiple cognitive and noncognitive processes. This study is the first to use a validated sequential sampling model (diffusion model) applied to results obtained from a simple 2-choice task in adult humans to assess the effects of hypoglycemia on the basic parameters of decision making. Method: Fourteen adult volunteers were tested on a numerosity discrimination task with and without reduced blood glucose concentrations. The results were analyzed with a model that dissects the components of processing that underlie decisions: the quality of the information on which a decision is based (drift rate), the critical amount of evidence that must be accumulated before a decision is made (boundary separation), and the time taken by nondecision processes. Results: Hypoglycemia resulted in a reduction of mean drift rate from 0.290 to 0.211, t(13) = 4.10, p     

Arsenic binding mechanisms on natural red earth: a potential substrate for pollution control

Natural red earth (hereafter NRE) was used as a novel adsorbent to examine its retention behaviour in different inorganic arsenic species (As (III) and As (V)) that are abundant in natural water. Adsorption isotherms were constructed at pH approximately 5.5 for As(III) and As(V) in 0.01 M NaNO(3) at 298K for 5 g/L NRE system. The initial arsenic [As(III) or As(V)] concentrations varied between approximately 10(-5) and approximately 10(-4) M. The experimental data were quantified using single site or stepwise Langmuir models. Sorption maximum, was observed at approximately 0.173 mM of As(V). To reach the maximum surface coverage of red earth at pH approximately 5.5 As(III) requires approximately 0.308 mM of initial loading. When compared to As (III), As(V) shows strong affinity for NRE surface sites. This study suggests the potential of NRE as a starting material in decontaminating water polluted with As species.     

Record of mercury pollution in sediments of lakes Nakaumi and Shinji in Japan

Two sediment core profiles from lakes Shinji and Nakaumi were studied in order to understand the level of mercury (Hg) pollution in lakes in northwestern Japan. The sedimentation rates were established on the basis of the activity of [²¹⁰Pb] and [¹³¹Cs] in the sediments. In Lake Shinji, the highest level of Hg (130 ng g^–1) in the sediment was found at a depth of 20–22 cm, while 195 ng g^–1 was found at a depth of 10–12 cm in the core profiles from Lake Nakaumi. The relative increase in Hg concentration in lake sediments started after 1960 and significant contamination events occurred in the early 1960s. Mercury profiles in lake sediments from lakes Shinji and Nakaumi are found to reflect the anthropogenic Hg released into the environment in the 1950s and 1960s. A pronounced maximun concentration of Hg is found in both lakes, where sediment accumulation rates differ.     

Biomechanics of oral mucosa

The prevalence of prosthodontic treatment has been well recognized, and the need is continuously increasing with the ageing population. While the oral mucosa plays a critical role in the treatment outcome, the associated biomechanics is not yet fully understood. Using the literature available, this paper provides a critical review on four aspects of mucosal biomechanics, including static, dynamic, volumetric and interactive responses, which are interpreted by its elasticity, viscosity/permeability, apparent Poisson''s ratio and friction coefficient, respectively. Both empirical studies and numerical models are analysed and compared to gain anatomical and physiological insights. Furthermore, the clinical applications of such biomechanical knowledge on the mucosa are explored to address some critical concerns, including stimuli for tissue remodelling (interstitial hydrostatic pressure), pressure–pain thresholds, tissue displaceability and residual bone resorption. Through this review, the state of the art in mucosal biomechanics and their clinical implications are discussed for future research interests, including clinical applications, computational modelling, design optimization and prosthetic fabrication.     

Characterization of CuInS2 thin films prepared by electrodeposition and sulfurization with photoluminescence spectroscopy

Potentiostatic electrodeposition and sulfurization techniques were used to prepare polycrystalline CuInS₂ thin films. X-ray diffraction and photoresponse measurements in a photoelectrochemical cell (PEC) revealed that photoactive polycrystalline CuInS₂ films can be deposited on Ti substrate. Photoluminescence (PL) spectroscopy was used to investigate the prepared thin films and optically characterize them. PL spectra revealed the defect structure of the samples with an acceptor energy level at 109 meV above the valance band and a donor energy level at 71 meV below the conduction band. The CuInS₂ thin films prepared in this investigation are observed to be In-rich material with n-type electrical conductivity.     

An energy conservation approach to adsorbate-induced surface stress and the extraction of binding energy using nanomechanics

Surface stress induced by molecular adsorption in three different binding processes has been studied experimentally using a microcantilever sensor. A comprehensive free-energy analysis based on an energy conservation approach is proposed to explain the experimental observations. We show that when guest molecules bind to atoms/molecules on a microcantilever surface, the released binding energy is retained in the host surface, leading to a metastable state where the excess energy on the surface is manifested as an increase in surface stress leading to the bending of the microcantilever. The released binding energy appears to be almost exclusively channeled to the surface energy, and energy distribution to other channels, including heat, appears to be inactive for this micromechanical system. When this excess surface energy is released, the microcantilever relaxes back to the original state, and the relaxation time depends on the particular binding process involved. Such vapor phase experiments were conducted for three binding processes: physisorption, hydrogen bonding, and chemisorption. Binding energies for these three processes were also estimated.     

Temporal variation of microbiological and chemical quality of noncarbonated bottled drinking water sold in Sri Lanka

Use of bottled water in Sri Lanka has increased over the last decade, while new brands of bottled water are often introduced to the market. However, the manufacturers' adherence to bottled water regulations is questionable, raising concerns regarding the quality of bottled water. The objective of the current study was to investigate the microbiological and chemical quality of bottled water in Sri Lanka. Thirty bottled water brands were sampled and their chemical and microbiological parameters were analyzed. Microbiological analysis was carried out within 1 to 3, 3 to 6, 6 to 9, and 9 to 12 mo after the date of manufacture. The results indicated that 63% of brands tested exceeded the levels permitted by the Sri Lanka Standards Institution (SLSI) for presumptive total coliforms (TC) (<10 cfu per 100 mL) whereas 97% brands exceeded the World Health Organization (WHO) permitted level. Thirty percent of brands exceeded the limit for presumptive fecal coliforms (FC) (0 cfu per 100 mL in accordance with WHO permitted levels, SLSI and the Sri Lanka Health Ministry requirement). Eighty percent of brands showed higher heterotrophic plate counts (HPC) which exceeded the WHO guidelines for bottled drinking water. Throughout their shelf life, the counts of TC, FC, and HPC bacteria decreased. Bacteria identified were Klebsiella pneumoniae ssp. pneumoniae, Enterobacter cloacae, Pseudomonas aeruginosa, and Pasteurella haemolytica, the most frequently being P. aeruginosa. The dominant fungi identified were Aspergillus sp. and Penicillium sp. Inorganic chemical parameters were within permitted levels for all brands except for initial content of ammonia. The results of this study show the need for the bottling industry to be monitored closely by relevant authorities, in order to provide safe bottled drinking water to consumers in Sri Lanka.