International collaboration: Will it be keeping alive East European research?

International scientific collaboration is very sensitive to political and economic changes in a country or a geopolitical region. Collaboration in research is reflected by the corresponding coauthorship of the published results which can be analysed with the help of bibliometric methods. Based on data from theScience Citation Index (SCI), the change of annual international coauthorship patterns ofBulgaria, Czechoslovakia, Hungary, Poland andRomania have been analysed for the periods 1981–1985 and 1984–1993, respectively. It is shown that international collaboration was not developing similarly in the countries under study. Whilst scientific communities of Hungary and Poland have already been opening in the early 80s, the international collaboration of the other East-European countries was still dominated by COMECON relations till 1989. As expected, since 1990 an increasing scientific collaboration with highly developed countries can be observed in all five countries. At the same time, scientific collaboration with the former communist countries shows a clear decline. The great share of international co-authorship links is some countries reflect various tendencies part of which are interpreted with the help of a cardiologic model.     

A Possible Industrial Solution to Ferment Lignocellulosic Hydrolyzate to Ethanol: Continuous Cultivation with Flocculating Yeast

The cultivation of toxic lignocellulosic hydrolyzates has become a challenging research topic in recent decades. Although several cultivation methods have been proposed, numerous questions have arisen regarding their industrial applications. The current work deals with a solution to this problem which has a good potential application on an industrial scale. A toxic dilute-acid hydrolyzate was continuously cultivated using a high-cell-density flocculating yeast in a single and serial bioreactor which was equipped with a settler to recycle the cells back to the bioreactors. No prior detoxification was necessary to cultivate the hydrolyzates, as the flocks were able to detoxify it in situ. The experiments were successfully carried out at dilution rates up to 0.52 h⁻¹. The cell concentration inside the bioreactors was between 23 and 35 g-DW/L, while the concentration in the effluent of the settlers was 0.32 ± 0.05 g-DW/L. An ethanol yield of 0.42–0.46 g/g-consumed sugar was achieved, and the residual sugar concentration was less than 6% of the initial fermentable sugar (glucose, galactose and mannose) of 35.2 g/L.     

Modulation of silica layer properties by varying the granulometric state of tetraethyl orthosilicate precursor aerosols during combustion chemical vapor deposition (CCVD)

Abstract

For the purpose of silica surface layer modulation, a pneumatic-controlled two-substance atomizer with inertia-based coarse droplet separation was operated at different system pressures for tetraethyl orthosilicate precursor aerosol supply during combustion chemical vapor deposition. A comprehensive testing study was performed to characterize the atomizer’s performance characteristics, initial precursor aerosols at the atomizer’s outlet, transformed aerosols before combustion, combustion aerosols and formed layers. Laser diffraction spectrometry, differential electrical mobility analyses and condensation particle counting were used for aerosol characterization with regard to particle size and particle production quantities. Layers were characterized by scanning electron microscopy, atomic force microscopy, spectral ellipsometry, water contact angle measurements and light transmission concerning geometric properties (thickness, surface structure and roughness) and physical behaviors (i.e., optical behaviors, hydrophobicity). Results show a quasi-linear relationship of the ejection mass flow of the pneumatic-controlled atomizer and geometric layer properties which again show a direct relationship to the physical properties. No correlation was found between the aerosols before combustion and the combustion aerosols since the majority of combustion aerosol particles are synthesized solely from the gas phase based on evaporated precursor material.

Copyright © 2020 American Association for Aerosol Research     

Extended bisection method for parameter identification of the transient heat conduction equation for thermo-elastic deformations during drilling

A new interdisciplinary approach is discribed to identifying unknown parameters using an extended version of the known interval bisection method. This developed method is based on the use of finite elements for calibrating the simulation calculation. The resulting thermo-elastic deformations which occur in drilling processes with impaired cooling lubrication are to be used as correction values for tool positioning in the NC control. Based on the strong impact on workpiece temperature of machining, a simulation approach is presented for calculating the temperature fields and their thermo-elastic consequences. In addition, methods are presented to correct these effects. This paper particularly deals with the temperature fields of drilling operations. Special attention is paid to the technique employed for iterative numerical determination of the unknown heat flux η _w and heat transfer coefficient \(\bar {\gamma }\) values. Finally, the data obtained from experiments are compared with those achieved by numerical simulation in order to verify the efficiency of simulation and determination of parameters.     

Hydroisomerization of Renewable and Fossil n-Alkanes over Bifunctional Dealuminated ZSM-5 Catalysts

The hydroisomerization of two long-chain n-alkane mixtures was investigated over bifunctional Pt/H-ZSM-5 catalysts before and after dealumination of preshaped zeolite/binder pellets. The hydroisomerization over the dealuminated catalysts leads to more isomers and less cracking products. Consequently, higher ratios of multi- to mono-branched isomerization products are formed as expected for large- rather than medium-pore zeolites. This indicates a higher availability of space in the vicinity of the active sites and provides an attractive route to make medium-pore zeolites suitable for upgrading higher boiling hydrocarbon feeds.     

Haptic two-finger contact with textiles

Real-time cloth simulation involves many computational challenges to be solved, particularly in the context of haptic applications, where high frame rates are necessary for obtaining a satisfying experience. In this paper, we present an interactive cloth simulation system that offers a compromise between a realistic physics-based simulation of fabrics and a haptic application meeting high requirements in terms of computation speed. Our system allows the user to interact with the fabric using two fingers. The required performance of the system is achieved by introducing an intermediate layer responsible for the simulation of the small part of the surface being in contact with the fingers. Additionally we separate the possible contact situations into different cases, each being individually handled by a specialised contact algorithm.

Science in Brazil. Part 1: A macro-level comparative study

Summary In the present paper, the evolution of publication activity and citation impact in Brazil is studied for the period 1991-2003. Besides the analysis of trends in publication and citation patterns and of national publication profiles, an attempt is made to find statistical evidences of the relation between international co-authorship and both research profile and citation impact in the Latin American region. Despite similarities and strong co-publication links with the other countries in the region, Brazil has nonetheless a specific research profile, and forms the largest potential in the region.