SAPPHIRE: A toolkit for building efficient stream programs for medical video analysis

This paper describes the design and implementation of SAPPHIRE – a novel middleware and software development kit for stream programing on a heterogeneous system of multi-core multi-CPUs with optional hardware accelerators such as graphics processing unit (GPU). A stream program consists of a set of tasks where the same tasks are repeated over multiple iterations of data (e.g., video frames). Examples of such programs are video analysis applications for computer-aided diagnosis and computer-assisted surgeries. Our design goal is to reduce the implementation efforts and ease collaborative software development of stream programs while supporting efficient execution of the programs on the target hardware. To validate the toolkit, we implemented EM-Automated-RT software with the toolkit and reported our experience. EM-Automated-RT performs real-time video analysis for quality of a colonoscopy procedure and provides visual feedback to assist the endoscopist to achieve optimal inspection of the colon during the procedure. The software has been deployed in a hospital setting to conduct a clinical trial.     

On-Site Fabrication of Crystalline Cerium Oxide Films and Patterns by Ink-Jet Deposition Method at Moderate Temperatures

Crystalline CeO₂ films and patterns have been successfully fabricated in a "single-step process" at moderate temperature. In this process, the combination of the ink-jet technique and depositing the precursor on a hot substrate (≤300°C) gave crystalline CeO₂ without further heat treatment. X-ray diffraction analysis revealed that the phase formed was crystallized ceria with nanosized (<10 nm) crystallites. The film thickness was several hundred nanometers and the pattern width was about 150 μm. Scanning electron microscopy analysis showed that the films and patterns were free of cracks and adhered to the substrate. This is the first report about the direct patterning of crystalline CeO₂ without postfiring or posttreatments like masking, etching, etc.     

Characterization of CuInS2 thin films prepared by electrodeposition and sulfurization with photoluminescence spectroscopy

Potentiostatic electrodeposition and sulfurization techniques were used to prepare polycrystalline CuInS₂ thin films. X-ray diffraction and photoresponse measurements in a photoelectrochemical cell (PEC) revealed that photoactive polycrystalline CuInS₂ films can be deposited on Ti substrate. Photoluminescence (PL) spectroscopy was used to investigate the prepared thin films and optically characterize them. PL spectra revealed the defect structure of the samples with an acceptor energy level at 109 meV above the valance band and a donor energy level at 71 meV below the conduction band. The CuInS₂ thin films prepared in this investigation are observed to be In-rich material with n-type electrical conductivity.     

Scanning electrochemical microscopy of model neurons: constant distance imaging

Undifferentiated and differentiated PC12 cells were imaged with the constant-distance mode of scanning electrochemical microscopy (SECM) using carbon ring and carbon fiber tips. Two types of feedback signals were used for distance control: the electrolysis current of a mediator (constant-current mode) and the impedance measured by the SECM tip (constant-impedance mode). The highest resolution was achieved using carbon ring electrodes with the constant-current mode. However, the constant-impedance mode has the important advantages that topography and faradaic current can be measured simultaneously, and because no mediator is required, the imaging can take place directly in the cell growth media. It was found that vesicular release events do not measurably alter the impedance, but the depolarizing solution, 105 mM K+, produces a dramatic impedance change such that constant-distance imaging cannot be performed during application of the stimulus. However, by operating the tip in the constant-height mode, cell morphology (via a change in impedance) and vesicular release could be detected simultaneously while moving the tip across the cell. This work represents a significant improvement over previous SECM imaging of model neurons, and it demonstrates that the combination of amperometry and constant-impedance SECM has the potential to be a powerful tool for investigating the spatial distribution of neurotransmitter release in vitro.     

Tribological Impact of SiC Encapsulation of Released Polycrystalline Silicon Microstructures

A method for coating released polysilicon microstructures with thin, uniform and conformal coatings of SiC derived from the single source precursor, 1,3-disilabutane (DSB) has been developed. This coating method has been successfully applied to micromechanical test devices which allow evaluation of friction and wear properties of the coating. Here, data on the coefficient of static friction of SiC coatings produced from DSB is presented. Also, a comparative wear study for devices which have been oxidized, treated with an anti-adhesion coating, and SiC coated is shown. Wear is examined by scanning electron microscopy (SEM) on devices which have been cycled repetitively under a nominal load. It is found that the application of a few nanometers-thin SiC coating provides exceptional wear resistance as well as significant reduction in friction on the microscale.     

Sulphidation of electrodeposited cuprous oxide thin films for photovoltaic applications

Electrodeposited cuprous oxide thin films on indium-doped tin oxide (ITO) substrates were sulphided by exposing them to a spray of aqueous solution of sodium sulphide or to a mixture of hydrogen sulphide and nitrogen gases. Both methods produced light darker and darker films having different photovoltaic characteristics in a solar cell structure. The photovoltages produced by the light darker films under AM 1.5 illumination was negative as compared to the positive photovoltages produced by the darker films. Spectral response measurements revealed that most of the light darker films produced positive photovoltages in the shorter wavelengths and negative photovoltages in the longer wavelengths. However, some of the light darker films produced only the negative photovoltage for the entire spectral range and their photovoltaic properties were comparatively better. Darker films resulted in only the positive photovoltages in the entire spectral range. As a result of the sulphidation, the bulk crystal structure of the cuprous oxide thin films was not changed, however, the interfacial characteristics of the solar cell structure were modified.     

Recent progress toward a manufacturable polycrystalline SiC surface micromachining technology

In this paper, we present results of recent research from our laboratory directed toward a manufacturable SiC surface micromachining technology for microelectromechanical systems (MEMS) applications. These include the development of a low-pressure chemical vapor deposition and in situ doping processes for silicon carbide (SiC) films at relatively low temperatures, as well as the development of selective dry etching processes for SiC using nonmetallic masking materials. Doped polycrystalline SiC films are deposited at 800/spl deg/C by using a precursor 1,3-disilabutane and dopant gas NH/sub 3/, with the minimum resistivity of 26 m/spl Omega//spl middot/cm. Dry etching for SiC and its selectivity toward silicon dioxide and silicon nitride masking materials are investigated using SF/sub 6//O/sub 2/, HBr, and HBr/Cl/sub 2/ transformer coupled plasmas. The etch rate, etch selectivity, and etch profile are characterized and compared for each etch chemistry. By combining the LPCVD and dry etching process with conventional microfabrication technologies, a multiuser SiC MEMS process is developed.     

Effect of maturity on some chemical components of cocoa

Immature harvest of cocoa to prevent losses due to pests and pilferage is common in Sri Lanka. The effect of maturity on the levels of some components of the Amelonado variety of cocoa grown in Sri Lanka is reported here. The major problem posed by immature harvest is the loss of fats which has been shown in this study to be of the order of 50% when the crop is harvested 1.5 months early, although the fatty acid composition does not vary significantly during this period. The pulp of immature cocoa pods contains less free sugars and produces less ethanol on yeast fermentation than pulp of mature pods but the methanol content of the distillate is higher in immature pulp. The pectin content of the pod endocarp declines as maturation proceeds.     

Numerical modelling of reinforced concrete columns subject to coupled uplift and shear forces induced by internal explosions

This article investigates the effect of time-variant coupled uplift forces and lateral blast pressures on the vulnerability of reinforced concrete columns when subjected to internal explosions. Detailed examination of archived events has demonstrated that confined blast can induce significant uplift forces on concrete columns carrying predominantly compression loads. These uplift forces can deteriorate the strength of concrete columns leading to destabilisation and a critical loss of structural adequacy. This research employs the applied element method together with high-resolution computational fluid dynamics simulations to model column response due to complex vented and contained internal blast environments. Results from a number of parametric studies highlighted the important effect of uplift forces and blast wave confinement with regard to the overall vulnerability of the column to internal building detonations. This research will be of direct importance to both practitioners and researchers involved with protective design of buildings.