A comparative study on the effect of VUV radiation in plasma SiOx-coated polyimide and polypropylene films

Wettability of polyimide (PI) and polypropylene (PP) films have been improved using SiO_x-like thin layers deposited from a mixture of hexamethyldisiloxane (HMDSO) and oxygen in a microwave distributed electron cyclotron resonance plasma reactor. The films wettability evolution behaviors were evaluated through the results of contact angle measurements, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The plasma depositions of SiO_x thin layers in presence of VUV radiation induce a contact angle decrease to about 7° and 35° for PI and PP films, respectively. XPS data showed that such difference in wettability is attributed to the increase of hydrophilic group's proportion at the surface of coated PI films due to VUV irradiation. AFM images showed that the PI surface topography remains relatively smooth when coated in presence of VUV radiation. However, in the case of PP films, AFM images revealed the growth of irregular structure due to a substrate etching effect supported by VUV radiation. For polymers coated without VUV irradiation, the deconvolution of the C1s peaks showed a significant decrease of CO bonds for both PI and PP substrates.     

Speech driven photo realistic facial animation based on an articulatory DBN model and AAM features

This paper presents a photo realistic facial animation synthesis approach based on an audio visual articulatory dynamic Bayesian network model (AF_AVDBN), in which the maximum asynchronies between the articulatory features, such as lips, tongue and glottis/velum, can be controlled. Perceptual Linear Prediction (PLP) features from audio speech, as well as active appearance model (AAM) features from face images of an audio visual continuous speech database, are adopted to train the AF_AVDBN model parameters. Based on the trained model, given an input audio speech, the optimal AAM visual features are estimated via a maximum likelihood estimation (MLE) criterion, which are then used to construct face images for the animation. In our experiments, facial animations are synthesized for 20 continuous audio speech sentences, using the proposed AF_AVDBN model, as well as the state-of-art methods, being the audio visual state synchronous DBN model (SS_DBN) implementing a multi-stream Hidden Markov Model, and the state asynchronous DBN model (SA_DBN). Objective evaluations on the learned AAM features show that much more accurate visual features can be learned from the AF_AVDBN model. Subjective evaluations show that the synthesized facial animations using AF_AVDBN are better than those using the state based SA_DBN and SS_DBN models, in the overall naturalness and matching accuracy of the mouth movements to the speech content.     

Accelerating SPARQL queries by exploiting hash-based locality and adaptive partitioning

State-of-the-art distributed RDF systems partition data across multiple computer nodes (workers). Some systems perform cheap hash partitioning, which may result in expensive query evaluation. Others try to minimize inter-node communication, which requires an expensive data preprocessing phase, leading to a high startup cost. Apriori knowledge of the query workload has also been used to create partitions, which, however, are static and do not adapt to workload changes. In this paper, we propose AdPart, a distributed RDF system, which addresses the shortcomings of previous work. First, AdPart applies lightweight partitioning on the initial data, which distributes triples by hashing on their subjects; this renders its startup overhead low. At the same time, the locality-aware query optimizer of AdPart takes full advantage of the partitioning to (1) support the fully parallel processing of join patterns on subjects and (2) minimize data communication for general queries by applying hash distribution of intermediate results instead of broadcasting, wherever possible. Second, AdPart monitors the data access patterns and dynamically redistributes and replicates the instances of the most frequent ones among workers. As a result, the communication cost for future queries is drastically reduced or even eliminated. To control replication, AdPart implements an eviction policy for the redistributed patterns. Our experiments with synthetic and real data verify that AdPart: (1) starts faster than all existing systems; (2) processes thousands of queries before other systems become online; and (3) gracefully adapts to the query load, being able to evaluate queries on billion-scale RDF data in subseconds.     

Spatial and seasonal variations and ecotoxicological significance of sediment trace metal concentrations in Kebir-Rhumel basin (Northeast of Algeria)

This study sought to assess sediment contamination by trace metals (cadmium, chromium, cobalt, copper, manganese, nickel, lead and zinc), to localize contaminated sites and to identify environmental risk for aquatic organisms in Wadis of Kebir Rhumel basin in the Northeast of Algeria. Water and surficial sediments (0-5 cm) were sampled in winter, spring, summer and autumn from 37 sites along permanent Wadis of the Kebir Rhumel basin. Sediment trace metal contents were measured by Flame Atomic Absorption Spectroscopy. Trace metals median concentrations in sediments followed a decreasing order: Mn > Zn > Pb > Cr > Cu > Ni > Co > Cd. Extreme values (dry weights) of the trace metals are as follows: 0.6-3.4 microg/g for Cd, 10-216 microg/g for Cr, 9-446 microg/g for Cu, 3-20 microg/g for Co, 105-576 microg/g for Mn, 10-46 microg/g for Ni, 11-167 microg/g for Pb, and 38-641 microg/g for Zn. According to world natural concentrations, all sediments collected were considered as contaminated by one or more elements. Comparing measured concentrations with American guidelines (Threshold Effect Level: TEL and Probable Effect Level: PEL) showed that biological effects could be occasionally observed for cadmium, chromium, lead and nickel levels but frequently observed for copper and zinc levels. Sediment quality was shown to be excellent for cobalt and manganese but medium to bad for cadmium, chromium, copper, lead, nickel and zinc regardless of sites.     

Modelling of the filling of micro-cavities of finite geometry by amorphous polymers using hot-embossing

The possibility to fill cavities of finite geometry could be described using an analytical model of the hot-embossing process of viscoelastic polymers. This model is based on the volume conservation during the forming process which allows to predict data concerning the geometrical evolution of the material on one hand, and on the other hand the filling time of cavities in the mould. A particular attention was drawn on the necessary time to fill the cavities depending on their shape or a scale factor for a given cavity shape.     

Midland: a service-oriented cluster computing infrastructure

Midland is a service-oriented software infrastructure that enables the clustering of arbitrarily large collections of computing resources. The resulting clusters may be integrated to form an open, dynamically configurable computational grid system where each cluster defines a self-reliant and independent management domain. Web Services make up the primary integration mechanism both at the cluster and grid levels, respectively. This is complemented by a light XML based messaging protocol exclusively used for cluster bound interactions. The paper describes Midland’s architecture, and the service-oriented approach taken to develop the associated resource management mechanisms. It also includes an exposition of the model of service capacity which is one of the enablers of the service-centric strategy underlying the cluster management mechanisms. The operational performance of Midland is illustrated experimentally in the context of a Grid test-bed comprising three clusters. The experimental results highlight the performance of the model of service capacity as well as some aspects of Midland operational performance.     

On the stochastic timed Pétri nets model and its application to the DQDB protocol

The goal of this paper is twofold : at first, to present the stochastic timed Pétri nets model by emphasizing its ability to express the main characteristics of real time distributed systems (parallelism, synchronization by message exchange, time attributes and in particular time constraints) and to allow both qualitative and quantitative analysis (concept of randomized states graph); second, to show a modeling methodology based on this model that allows a rigorous modeling of theDqdb protocol (Qa access, bwb mechanism role,Pa access influence). A new contribution to theQa mechanism has been done (1).     

On visual servoing based on efficient second order minimization

This paper deals with the Efficient Second order Minimization (ESM) and the image-based visual servoing schemes. In other words, it deals with the minimization based on the pseudo-inverse of the mean of the Jacobians or on the mean of Jacobian Pseudo-inverses. Chronologically, it has been noticed in Tahri and Chaumette (2003) [22] that ESM generally improves the system behavior when compared with the system in which only the simple Jacobian Pseudo-inverses are used. Subsequently, a mathematical explanation has been given in Malis (2004) [12]. In this paper, the proofs given by Malis are discussed and it will be shown that there is a limitation to the validity of the ESM. We will also show that the use of ESM does not necessarily ensure a better system behavior, especially in the situations where large rotational motions are involved. Further, a new appropriate formula of the ESM is proposed and validated using several kinds of features.     

Experimental analysis and numerical modelling of the forming process of polypropylene replicas of micro-cavities using hot embossing

Numerical modelling of the deformation of a polymer using the finite elements method in axisymetrical mode was performed using the LsDyna^® software to describe the filling of micro-cavities during the forming process of the material using the hot embossing. These simulations firstly allow verifying whether the chosen forming process conditions promote or not an optimized filling of the superficial cavities in order to achieve precise replicas which best reproduce the superficial topography of the mould. The simulations were carried out to evaluate the filling of the cavities taking into account the mechanical behaviour of the selected polymer into the model. Moreover, these models were developed to verify the effect of the distribution of the mould cavities on their filling. The influence of the mobility of non deformable rigid plates on the filling of the cavities represents an auxiliary variable. In the approach presented, the compression plates are assumed to be parallel and non deformable, whereas the polymer disk follows a rubbery behaviour around a temperature equal to 140°C. Globally the modelling results are satisfactory for they are rather close to the experimental observations conducted. In summary, the effect of the normal stress as also the distribution of micro-cavities at the mould surface seem to prevail in the case of the forming process by hot embossing.