Effect of Different Cosolvents on Transesterification of Waste Cooking Oil in a Microreactor

Biodiesel was prepared from waste cooking oil combined with methanol. The process was performed via transesterification in a microreactor using kettle limescale as a heterogeneous catalyst and various cosolvents under different conditions. n‐Hexane and tetrahydrofuran were selected as cosolvents to investigate fatty acid methyl esters (FAMEs). To optimize the reaction conditions, the main parameters affecting FAME% including reaction temperature, catalyst concentration, oil‐to‐methanol volumetric ratio, and cosolvent‐to‐methanol volumetric ratio were studied via response surface methodology. Under optimal reaction conditions and in the presence of the cosolvents n‐hexane and tetrahydrofuran, high FAME purities were achieved. Considering the experimental results, the limescale catalyst is a unique material, and the cosolvent method can reduce significantly the reaction time and biodiesel production cost.     

Temporal order and functional analysis of mutations within the Fli-1 and p53 genes during the erythroleukemias induced by F-MuLV

The erythroleukemias induced by Friend murine leukemia virus (F-MuLV) result from the accumulation of a number of genetic changes, including activation of the Fli-1 proto-oncogene and inactivation of the p53 tumor suppressor gene. We have determined the temporal order of mutation of the genes involved in this multistage malignancy, by serial in vivo transplantation of F-MuLV induced primary erythroleukemias into syngenic Balb/c mice. These primary tumors are capable of growing when transplanted into syngenic mice, but die after several days of in vitro culture. From the transplanted tumors grown in syngenic mice, erythropoietin-dependent cell lines were established in culture that are clonally related to cells in the primary tumors. We show that retroviral insertional activation of the Fli-1 ets family member is the first detectable genetic event in F-MuLV induced primary erythroleukemias. Mutations in the p53 gene were observed in the Epo-dependent cell lines but not in the transplanted erythroleukemias used to establish these cell lines in culture. These data suggest that activation of Fli-1 plays an important role in the early stages of F-MuLV-induced leukemia, perhaps by altering the self-renewal probabilities of erythroid progenitor cells and that p53 mutations immortalize these cells, enabling them to grow in vitro in the presence of Epo.     

GIBC formulation for the resonant frequencies and fielddistribution of a substrate-mounted dielectric resonator

Dielectric resonators (DR's) are widely used in telecommunication systems. A method is proposed here to find the resonant frequency and field distribution in a substrate-mounted DR structure. The field of a dielectric rod has been decomposed into a combination of guided modes with unknown coefficients and an unknown continuous spectrum of radiation field. The unknowns are then obtained by applying two generalized impedance boundary conditions (GIBC's) representing the substrate and air layers at the top and bottom of the DR. This leads to the calculation of the total (guided+radiation) field as well as the resonant frequency of the structure     

Legendre multiwavelet functions for numerical solution of multi-term time-space convection–diffusion equations of fractional order

Engineering with Computers - In this study, the Ritz–Galerkin method based on Legendre multiwavelet functions is introduced to solve multi-term time-space convection–diffusion equations...     

Fuzzy logic controller and cascade inverter for direct torque control of IM

In this paper, a five-level cascaded H-bridge multilevel inverters topology is applied on induction motor control known as direct torque control (DTC) strategy. More inverter states can be generated by a five-level inverter which improves voltage selection capability. This paper also introduces two different control methods to select the appropriate output voltage vector for reducing the torque and flux error to zero. The first is based on the conventional DTC scheme using a pair of hysteresis comparators and look up table to select the output voltage vector for controlling the torque and flux. The second is based on a new fuzzy logic controller using Sugeno as the inference method to select the output voltage vector by replacing the hysteresis comparators and lookup table in the conventional DTC, to which the results show more reduction in torque ripple and feasibility of smooth stator current. By using Matlab/Simulink, it is verified that using five-level inverter in DTC drive can reduce the torque ripple in comparison with conventional DTC, and further torque ripple reduction is obtained by applying fuzzy logic controller. The simulation results have also verified that using a fuzzy controller instead of a hysteresis controller has resulted in reduction in the flux ripples significantly as well as reduces the total harmonic distortion of the stator current to below 4 %.     

Design and fabrication of 3D‐plotted polymeric scaffolds in functional tissue engineering

Regenerating the load‐bearing tissues requires 3D scaffolds that balance the temporary mechanical function with the biological requirements. In functional tissue engineering, designing scaffolds with biomimetic mechanical properties could promote tissue ingrowth since the cells are sensitive to their local mechanical environment. This work aims to design scaffolds that mimic the mechanical response of the biological tissues under physiological loading conditions. Poly(L ‐lactide) (PLLA) scaffolds with varying porosities and pore sizes were made by the 3D‐plotting technique. The scaffolds were tested under unconfined ramp compression to compare their stress profile under load with that of bovine cartilage. A comparison between the material parameters estimated for the scaffolds and for the bovine cartilage based on the biphasic theory enabled the definition of an optimum window for the porosity and pore size of these constructs. Moreover, the finite element prediction for the stress distribution inside the scaffolds, surrounded by the host cartilaginous tissue, demonstrated a negligible perturbation of the stress field at the site of implantation. The finite element modeling tools in combination with the developed methodology for optimal porosity/pore size determination can be used to improve the design of biomimetic scaffolds. POLYM. ENG. SCI., 47:608–618, 2007. © 2007 Society of Plastics Engineers.     

A flowchart‐based intelligent tutoring system for improving problem‐solving skills of novice programmers

Intelligent tutoring and personalization are considered as the two most important factors in the research of learning systems and environments. An effective tool that can be used to improve problem‐solving ability is an Intelligent Tutoring System which is capable of mimicking a human tutor's actions in implementing a one‐to‐one personalized and adaptive teaching. In this paper, a novel Flowchart‐based Intelligent Tutoring System (FITS) is proposed benefiting from Bayesian networks for the process of decision making so as to aid students in problem‐solving activities and learning computer programming. FITS not only takes full advantage of Bayesian networks, but also benefits from a multi‐agent system using an automatic text‐to‐flowchart conversion approach for engaging novice programmers in flowchart development with the aim of improving their problem‐solving skills. In the end, in order to investigate the efficacy of FITS in problem‐solving ability acquisition, a quasi‐experimental design was adopted by this research. According to the results, students in the FITS group experienced better improvement in their problem‐solving abilities than those in the control group. Moreover, with regard to the improvement of a user's problem‐solving ability, FITS has shown to be considerably effective for students with different levels of prior knowledge, especially for those with a lower level of prior knowledge.     

MC-MLAS: Multi-channel Minimum Latency Aggregation Scheduling in Wireless Sensor Networks

Data aggregation is a key, yet time-consuming functionality in wireless sensor networks (WSNs). Multi-channel design is a promising technique to alleviate interference as a primary reason for long latency of TDMA aggregation scheduling. Indeed, it provides more potential of parallel transmissions over different frequency channels, thus minimizing time latency. In this paper, we focus on designing a multi-channel minimum latency aggregation scheduling protocol, named MC-MLAS, using a new joint approach for tree construction, channel assignment, and transmission scheduling. To our best knowledge, this is the first work in the literature which combines orthogonal channels and partially overlapping channels to consider the total latency involved in data aggregation. Extensive simulations verify the superiority of MC-MLAS in WSNs.     

Survey of multipath routing protocols for mobile ad hoc networks

This survey investigates multipath routing protocols for mobile ad hoc networks (MANETs). The main objectives of multipath routing protocols are to provide reliable communication and to ensure load balancing as well as to improve quality of service (QoS) of MANETs. These multipath protocols are broadly classified into five categories based on their major goals. The goals are to improve delay, provide reliability, reduce overhead, maximize network life and support hybrid routing. Multipath routing protocols address issues such as multiple paths discovery and maintaining these paths. Issues, objectives, performances, advantages and disadvantages of these protocols are investigated and summarized. A checklist is provided as a guideline so that a network designer can choose an appropriate multipath routing protocol to meet the network's application objectives.     

Characterizing 3D vegetation structure from space: Mission requirements

Human and natural forces are rapidly modifying the global distribution and structure of terrestrial ecosystems on which all of life depends, altering the global carbon cycle, affecting our climate now and for the foreseeable future, causing steep reductions in species diversity, and endangering Earth's sustainability.To understand changes and trends in terrestrial ecosystems and their functioning as carbon sources and sinks, and to characterize the impact of their changes on climate, habitat and biodiversity, new space assets are urgently needed to produce high spatial resolution global maps of the three-dimensional (3D) structure of vegetation, its biomass above ground, the carbon stored within and the implications for atmospheric green house gas concentrations and climate. These needs were articulated in a 2007 National Research Council (NRC) report (NRC, 2007) recommending a new satellite mission, DESDynI, carrying an L-band Polarized Synthetic Aperture Radar (Pol-SAR) and a multi-beam lidar (Light RAnging And Detection) operating at 1064 nm. The objectives of this paper are to articulate the importance of these new, multi-year, 3D vegetation structure and biomass measurements, to briefly review the feasibility of radar and lidar remote sensing technology to meet these requirements, to define the data products and measurement requirements, and to consider implications of mission durations. The paper addresses these objectives by synthesizing research results and other input from a broad community of terrestrial ecology, carbon cycle, and remote sensing scientists and working groups. We conclude that:

(1)

Current global biomass and 3-D vegetation structure information is unsuitable for both science and management and policy. The only existing global datasets of biomass are approximations based on combining land cover type and representative carbon values, instead of measurements of actual biomass. Current measurement attempts based on radar and multispectral data have low explanatory power outside low biomass areas. There is no current capability for repeatable disturbance and regrowth estimates.

(2)

The science and policy needs for information on vegetation 3D structure can be successfully addressed by a mission capable of producing (i) a first global inventory of forest biomass with a spatial resolution 1 km or finer and unprecedented accuracy (ii) annual global disturbance maps at a spatial resolution of 1 ha with subsequent biomass accumulation rates at resolutions of 1 km or finer, and (iii) transects of vertical and horizontal forest structure with 30 m along-transect measurements globally at 25 m spatial resolution, essential for habitat characterization.

We also show from the literature that lidar profile samples together with wall-to-wall L-band quad-pol-SAR imagery and ecosystem dynamics models can work together to satisfy these vegetation 3D structure and biomass measurement requirements. Finally we argue that the technology readiness levels of combined pol-SAR and lidar instruments are adequate for space flight. Remaining to be worked out, are the particulars of a lidar/pol-SAR mission design that is feasible and at a minimum satisfies the information and measurement requirement articulated herein.