Control of Wind-Induced Self-Excited Oscillations by Transfer of Internal Energy to Higher Modes of Vibration. II: Application to Taut Cables

In Part I of this paper, a theoretical basis is presented using a two-degrees-of-freedom model. In this second part of the study, the passive control and the two types of semiactive controls introduced in Part I are examined numerically for a taut cable experiencing wind-induced galloping motion. The passive and the semiactive control schemes for taut cables show a good similarity with the results obtained for the two-degrees-of-freedom model. The potential of using these control schemes in practical applications to flexible structures is demonstrated.     

ILU factorization well suited to the vector processor using a variant of the 5-point difference scheme

The implementation on the vector processor of Incomplete LU factorization in the Preconditioned Conjugate Gradient method and other Preconditioned CG-like methods for the numerical solutions of the partial differential equations is discussed. For sufficient vectorization, a variant of the standard 5-point difference scheme for 2-dimensional problems is introduced. The convergence property of ILU factorization for this variant is examined in comparison with that vectorized with the usual hyperplane ordering method for the standard 5-point difference scheme on the vector processor. The efficiency and effectiveness of this factorization for the variant of the difference scheme is demonstrated through several computational experiments.     

EDM-Lathe for Micromachining

In this paper a new type of micro-EDM machine is proposed. The machine operates similarly to a turning lathe. An electrode fabrication system is installed which makes it possible to fabricate on-the-machine complex microelectrodes with sharp edges and corners. A prototype set of equipment was realized and test machining proved that a machine of this type can produce microcylindrical, overhung cavities, or cylindrical microholes with larger internal diameters than the entrance diameter. This result reveals the possibility of fabrication of various microparts such as microball bearings.     

A design of high optical efficiency wedge type light guide plate adopting twin inclined cylindrical surface

We propose wedge type light guide plate (LGP) adopting twin inclined cylindrical surfaces (TICS) at the incident part of a LGP. It has higher optical efficiency than conventional wedge type LGP. In dimension of LGP which the thickness of incident part is 1.5 mm and that of luminance part is 0.7 mm, the optical efficiency of wedge type LGP adopting TICS is expected to be 96% in comparison with a normal flat LGP. In addition, there is an advantage to reduce the non‐uniformity of vicinity of light emitted diodes (LEDs) by TICS reflecting light laterally. However, it is necessary that the LED centers are aligned with the intersections of TICS. The misalignment of LED causes non‐uniformity of optical profile that is slightly larger than a normal LGP.     

Feasibility of a 1,400 m Span Steel Cable-Stayed Bridge

This paper describes the feasibility of 1,400 m steel cable-stayed bridges from both structural and economic viewpoints. Because the weight of a steel girder strongly affects the total cost of the bridge, the writers present a procedure to obtain a minimum weight for a girder that ensures safety against static and dynamic instabilities. For static instability, elastoplastic, finite-displacement analysis under in-plane load and elastic, finite-displacement analysis under displacement-dependent wind load are conducted; for dynamic instability, multimodal flutter analysis is carried out. It is shown that static critical wind velocity of lateral torsional buckling governs the dimension of the girder. Finally, the writers briefly compare a cable-stayed bridge with suspension bridge alternatives.     

Stress distribution of coated film with a range of coated film thickness and elastic properties under a single EHL operating condition

In recent years, the techniques improving sliding performances have progressed by using coated films possessing superior tribological properties, to reduce the failures of the mechanical elements. Those techniques are often used under severe conditions such as elastohydrodynamic lubrication (EHL). In this paper, numerical three-dimensional analysis of the maximum shear stress applied into the coated film and substrate under a single EHL operating condition was performed with a range of coated film thickness and elastic properties. The strength of coated film as one of those techniques was evaluated numerically, resulting in an optimum design of coated film. As a result, coated films with a larger value of thickness and a smaller modulus of elasticity than that of substrate are preferable.     

Development of Laser Ionization Techniques for Evaluation of the Effect of Cancer Drugs Using Imaging Mass Spectrometry

Recently, combined therapy using chemotherapy and photodynamic therapy (PDT) has been proposed as a means of improving treatment outcomes. In order to evaluate the efficacy of combined therapy, it is necessary to determine the distribution of the anticancer drug and the photosensitizer. We investigated the use of imaging mass spectrometry (IMS) to simultaneously observe the distributions of an anticancer drug and photosensitizer administered to cancer cells. In particular, we sought to increase the sensitivity of detection of the anticancer drug docetaxel and the photosensitizer protoporphyrin IX (PpIX) by optimizing the ionization-assisting reagents. When we used a matrix consisting of equal weights of a zeolite (NaY5.6) and a conventional organic matrix (6-aza-2-thiothymine) in matrix-assisted laser desorption/ionization, the signal intensity of the sodium-adducted ion of docetaxel (administered at 100 μM) increased about 13-fold. Moreover, we detected docetaxel with the zeolite matrix using the droplet method, and detected PpIX by fluorescence and IMS with α-cyano-4-hydroxycinnamic acid (CHCA) using the spray method.     

Photoactivable Elimination of Tumorigenic Human Induced Pluripotent Stem Cells by Using a Lectin–Doxorubicin Prodrug Conjugate

Human pluripotent stem cells (hPSCs) are attractive resources for regenerative medicine, but medical applications are hindered by their tumorigenic potential. Previously, a hPSC-specific lectin probe, rBC2LCN, was identified through comprehensive glycome analysis by using high-density lectin microarrays. Herein, a lectin–doxorubicin (DOX) prodrug conjugate, with controllable photolysis activation for the elimination of tumorigenic human induced pluripotent stem cells, has been developed. rBC2LCN was fused with a biotin-binding protein, tamavidin (BC2Tama), and the fusion protein was expressed in Escherichia coli and purified by means of affinity chromatography. BC2Tama was then conjugated with doxorubicin-photocleavable biotin (DOXPCB). The BC2Tama–DOXPCB conjugates were observed to bind to hPSCs followed by internalization. Upon exposure to ultraviolet light, DOX was released inside the cells, which allowed specific killing of the hPSCs. Thus, BC2Tama–DOXPCB should be useful for the targeted elimination of hPSCs contained in hPSC-derived cell therapy products. This is the first report of the generation of lectin–prodrug conjugates. BC2Tama should be applicable for the targeted delivery of various types of biotinylated compounds into hPSCs.     

Self-Assembling Lectin Nano-Block Oligomers Enhance Binding Avidity to Glycans

Lectins, carbohydrate-binding proteins, are attractive biomolecules for medical and biotechnological applications. Many lectins have multiple carbohydrate recognition domains (CRDs) and strongly bind to specific glycans through multivalent binding effect. In our previous study, protein nano-building blocks (PN-blocks) were developed to construct self-assembling supramolecular nanostructures by linking two oligomeric proteins. A PN-block, WA20-foldon, constructed by fusing a dimeric four-helix bundle de novo protein WA20 to a trimeric foldon domain of T4 phage fibritin, self-assembled into several types of polyhedral nanoarchitectures in multiples of 6-mer. Another PN-block, the extender PN-block (ePN-block), constructed by tandemly joining two copies of WA20, self-assembled into cyclized and extended chain-type nanostructures. This study developed novel functional protein nano-building blocks (lectin nano-blocks) by fusing WA20 to a dimeric lectin, Agrocybe cylindracea galectin (ACG). The lectin nano-blocks self-assembled into various oligomers in multiples of 2-mer (dimer, tetramer, hexamer, octamer, etc.). The mass fractions of each oligomer were changed by the length of the linkers between WA20 and ACG. The binding avidity of the lectin nano-block oligomers to glycans was significantly increased through multivalent effects compared with that of the original ACG dimer. Lectin nano-blocks with high avidity will be useful for various applications, such as specific cell labeling.