Improving Short-Circuit Current Capacity, Resistance, and Breaking Load of OPGW Constructions by Modifying Aluminium Alloy With AlB2

This article presents a method that can be applied to molten AA-6101 alloy to improve electrical properties of the aluminium part of the optical ground wire (OPGW) used in overhead transmission lines to protect phase conductors from lightning strike and to transmit signals and data. AA-6101 alloy in casting of the log as 6 m length and 178 mm diameter for extrusion has been inoculated by AlB₂ to decrease detrimental effects of Cr, Ti, V, and Zr on the conductivity of the material. After inoculation, improved billets were extruded as 9.5 mm diameter feedstock. Required wires drawn from the feedstock according to the construction types of OPGW to be tested were exposed to aging at 175°C, 6 h (T-8). Upon completion of the back-twist and performing-type stranding process, resistance, and short-circuit current capacity and breaking load of the OPGW 88/44 constructions with other metal combinations have been examined and tested to show improvement. Results are summarized in tables and graphically.     

Supercritical fluid extraction of daphne (Laurus nobilis L.) seed oil

Laurus nobilis L., commonly known as daphne tree, is an evergreen that belongs to the Lauraceae family. Daphne trees produce grape-sized shiny purplish berries having three parts: flesh, skin, and an inner kernel (single seed). This study examines supercritical CO₂ (SC-CO₂) extraction of oil from daphne seeds. The oil yield of ground seeds varied from 14 to 28% depending on the method and particle size used for oil recovery. Yields were similar for both petroleum ether and SC-CO₂ extraction. The extraction yield decreased significantly with increasing particle size. The amount of extract collected increased exponentially with increasing SC-CO₂ pressure. The highest extraction yield was obtained at the highest temperature studied, 75°C. More than 45% of the oil was lauric acid. SC-CO₂ is a viable technique to obtain high-purity L. nobilis L. seed oil, which is a potential ingredient for the cosmetic industry.     

Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich alloys

In this systematic study, dispersion-strengthening effect of the Cu–25.91Mn (wt.%), Cu–26.62Mn–8.99Al (wt.%), Cu–22.17Mn–12.32Zn (wt.%) ingot alloys have been investigated. Samples were homogenized at a high fixed temperature in different periods and cooled with different cooling rates. After processes, microanalysis of the samples were interpreted by using scanning electron microscope (SEM) and weight percentages of the elements of the occurrence phases in the samples obtained by using electron dispersion spectroscopy (EDS) technique. Additionally, some characteristic properties of the heat treated samples with different conditions of Cu–Mn, Cu–Mn–Al, Cu–Mn–Zn ingot alloys were also discussed.     

Mechanical properties in the initial stage of sintering

Silicon nitride-based ceramics with different compositions were sintered in the 60%–90% range of theoretical density. Linear correlations between the apparent density and the modulus of elasticity, the three- and four-point bend strengths or the Vickers hardness, were observed. The slopes of the straight lines were nearly the same for all compositions. Furthermore, the modulus of elasticity, hardness, fracture toughness and strength were calculated as functions of density by modelling the structure as a random arrangement of spheres as suggested by Fischmeister and Arzt. The relationships obtained have been compared with the measured ones.Nomenclature a average contact area - a _c increase of the area of a crack - A area of the reference plane - b size of the critical defect - c constant in Equation 4 - D density - D ₀ density before shrinkage - D _T theoretical density - e direction of macroscopic strain - E modulus of elasticity - E ₀ modulus of elasticity of the dense material - f force loading a contact - f() projection of force f to e - F force loading the reference plane - g geometry parameter in the Griffiths relationship - H hardness - K _IC fracture toughness - N number of particles in unit volume - N() the fraction of N in a given spherical angle - n() number of particles in the volume around the reference plane - P porosity - R initial particle radius - R particle radius after fictitious growth - R particle radius after redistribution of material - R _SQ shared correlation coefficient - S surface energy of the defect - vector connecting the centres of neighbouring particles - W work necessary for increase the area of a crack - Z average coordination number - Z ₀ initial coordination number - strain - _T strain at theoretical strength - strength - _T theoretical strength (limit of elasticity) - angle between v and e     

A new QoS-aware TDMA/FDD MAC protocol with multi-beam directional antennas

With the ever-increasing demand for wireless real-time services and continuing emergence of new multimedia applications especially for mobile users, it is necessary for the network to support various levels of quality of service (QoS) while maximizing the utilization of scarce and expensive wireless channel resources. Considering this fact, a new TDMA/FDD MAC protocol integrating a novel QoS management algorithm and multi-beam Directional Antennas (DAs) to efficiently exploit wireless resources has been developed and presented in this paper. It supports all ATM CBR, VBR, ABR and UBR service classes by adopting a well-managed dynamic guarantee-based QoS scheduling algorithm. The work mainly aims at increasing the wireless system throughput as well as improving the call-blocking ratios and end-to-end delays for real-time applications. This seamless communication enables both handling real-time multimedia traffics in a fair manner and granting call requests on the basis of the connection types. The system has been developed, modeled and simulated using OPNET Modeler. The simulation results show that the QoS-aware TDMA/FDD MAC with multi-beam DAs has substantially increased the system throughput and that the call-blocking ratio has been reduced from 86% to 18%, when the proposed MAC with 8-Beam antennas is employed instead of the regular MAC.     

A set of new Chebyshev kernel functions for support vector machine pattern classification

In this study, we introduce a set of new kernel functions derived from the generalized Chebyshev polynomials. The proposed generalized Chebyshev polynomials allow us to derive different kernel functions. By using these polynomial functions, we generalize recently introduced Chebyshev kernel function for vector inputs and, as a result, we obtain a robust set of kernel functions for Support Vector Machine (SVM) classification. Thus in this study, besides clarifying how to apply the Chebyshev kernel functions on vector inputs, we also increase the generalization capability of the previously proposed Chebyshev kernels and show how to derive new kernel functions by using the generalized Chebyshev polynomials. The proposed set of kernel functions provides competitive performance when compared to all other common kernel functions on average for the simulation datasets. The results indicate that they can be used as a good alternative to other common kernel functions for SVM classification in order to obtain better accuracy. Moreover, test results show that the generalized Chebyshev kernel approaches to the minimum support vector number for classification in general.     

Estimation of target station data using satellite data and deep learning algorithms

In this study, an innovative model has been developed for wind speed estimation through the Deep Learning method using hourly wind speed data from the measurement stations of the General Directorate of Meteorology in Van and Hakkari provinces in Turkey in conjunction with simultaneous satellite images from Eumetsat. Obtained satellite images were used during the introduction of the model, while wind speed data were used at the output stage. As a result of the findings, it was found that 85% accuracy performance could be achieved to provide sufficient insight for systems that are widely established worldwide. The model, developed as a result of the study, eliminates the need to install wind measuring stations for any region on earth within the satellite field in terms of determining wind potential. Since the field of view of the Meteosat 7 satellite covers the whole of Eastern Europe, it was determined that it could predict a high rate of up to 6 hours later by the method used in image analysis. The systems to be controlled with this method will be able to examine the weather events instantly at each point in the satellite field of view and make more accurate decisions. Also, companies will be able to perform a more detailed and rapid field scan compared to existing limited methods, and reduce initial investment costs and operating costs in terms of renewable energy resources investments.