Microstructure,wear and corrosion characteristics of multiple-reinforced (SiC–B4C–Al2O3) Al matrix composites produced by liquid metal infiltration

In this study, AA7075 aluminum matrix composites reinforced with the combination of SiC, Al₂O₃, and B₄C particles were fabricated by the liquid metal infiltration method. The effects of the relative ratio of B₄C and Al₂O₃ particles on the microstructural, wear, and corrosion features of the composite samples were analyzed using XRD, light metal microscopy, SEM, EDS, Brinell hardness, ball-on-disc type tribometer, and potentiodynamic polarization devices. It was determined that infiltration occurred more successfully, and homogenously distributed particles with reduced porosity were obtained as the amount of Al₂O₃ increased. Worn surface studies revealed that the specimens were predominantly worn by abrasion and adhesion. The increase in B₄C/Al₂O₃ ratio caused a decrease in the hardness and wear strength, whereas it increased the corrosion resistance.     

Masking the Peroxidase-Like Activity of the Molybdenum Disulfide Nanozyme Enables Label-Free Lipase Detection

Two-dimensional MoS₂ nanoparticles (2D-nps) exhibit artificial enzyme properties that can be regulated at bio-nanointerfaces. We discovered that protein lipase is able to tune the peroxidase-like activity of MoS₂ 2D-nps, offering low-nanomolar, label-free detection and identification in samples with unknown identity. The inhibition of the peroxidase-like activity of the MoS₂ 2D-nps was demonstrated to be concentration dependent, and as low as 5 nm lipase was detected with this approach. The results were compared with those obtained with several other proteins that did not display any significant interference with the nanozyme behavior of the MoS₂ 2D-nps. This unique response of lipase was characterized and exploited for the successful identification of lipase in six unknown samples by using qualitative visual inspection and a quantitative statistical analysis method. The developed methodology in this approach is noteworthy for many aspects; MoS₂ 2D-nps are neither labeled with a signaling moiety nor modified with any ligands for signal readout. Only the intrinsic nanozyme activity of the MoS₂ 2D-nps is exploited for this detection approach. No analytical equipment is necessary for the visual detection of lipase. The synthesis of the water-soluble MoS₂ 2D-nps is low costing and can be performed in bulk scale. Exploring the properties of 2D-nps and their interactions with biological materials reveals highly interesting yet instrumental features that offer the development of novel bioanalytical approaches.     

Novel T-rail electrodes for substrate removed low-voltage high-speed GaAs/AlGaAs electrooptic modulators

A novel traveling-wave electrode utilizing capacitively loaded T-rail elements was developed for low-voltage high-speed substrate-removed GaAs/AlGaAs electrooptic modulators. Electrodes with varying dimensions were fabricated and characterized. Electrode phase velocity, characteristic impedance, loss coefficient, and capacitive loading were extracted from the measured s-parameters up to 40 GHz. Electrode was also simulated using a finite-element solver. The measured and calculated electrode capacitance values were found to be in excellent agreement, showing that the electrode can be precisely designed. Approaches were outlined to provide a group velocity-matched very high-speed modulator electrode suitable for a low drive-voltage substrate-removed GaAs/AlGaAs electro-optic modulator     

Viscoelastic State for the Solutions of Spherically Symmetric Viscoelasticity Problems

The solutions of the spherically symmetric, linear, isothermal, and transient viscoelasticity problems via reciprocity theorem have been investigated for a specific material. The integral form of stress–strain relations has been used. The Laplace transform of a viscoelastic state, which is necessary for the integral equation arising as a result of reciprocity theorem, has been derived. This integral equation has been solved by Laplace transform. A sample problem has been solved to test the presented formulation. A numerical application of the analytic solution of this problem has been given.     

A comprehensive survey: artificial bee colony (ABC) algorithm and applications

Swarm intelligence (SI) is briefly defined as the collective behaviour of decentralized and self-organized swarms. The well known examples for these swarms are bird flocks, fish schools and the colony of social insects such as termites, ants and bees. In 1990s, especially two approaches based on ant colony and on fish schooling/bird flocking introduced have highly attracted the interest of researchers. Although the self-organization features are required by SI are strongly and clearly seen in honey bee colonies, unfortunately the researchers have recently started to be interested in the behaviour of these swarm systems to describe new intelligent approaches, especially from the beginning of 2000s. During a decade, several algorithms have been developed depending on different intelligent behaviours of honey bee swarms. Among those, artificial bee colony (ABC) is the one which has been most widely studied on and applied to solve the real world problems, so far. Day by day the number of researchers being interested in ABC algorithm increases rapidly. This work presents a comprehensive survey of the advances with ABC and its applications. It is hoped that this survey would be very beneficial for the researchers studying on SI, particularly ABC algorithm.     

Sr2+–Mg2+-Doped SiAlON Ceramics

In the present work, multi-cation-doped (Sr²⁺–Mg²⁺) SiAlON ceramics were investigated. MgO and SrO were used in 100:0 and 50:50 molar ratios. The mixture was sintered at 1800° and 1830°C for 1 h in a gas pressure-sintering furnace. The results showed that sintered samples were composed of mainly α- and β-SiAlON phases and small amounts of some Sr-containing phases and SiAlON polytypes. According to Rietveld analysis of X-ray diffraction patterns, Mg is incorporated into the α-SiAlON structure. However, the incorporation of Sr is limited.     

Facile synthesis of CsPbBr3/PbSe composite clusters

In this work, CsPbBr₃ and PbSe nanocomposites were synthesized to protect perovskite material from self-enlargement during reaction. UV absorption and photoluminescence (PL) spectra indicate that the addition of Se into CsPbBr₃ quantum dots modified the electronic structure of CsPbBr₃, increasing the band gap from 2.38 to 2.48 eV as the Cs:Se ratio increased to 1:3. Thus, the emission color of CsPbBr₃ perovskite quantum dots was modified from green to blue by increasing the Se ratio in composites. According to X-ray diffraction patterns, the structure of CsPbBr₃ quantum dots changed from cubic to orthorhombic due to the introduction of PbSe at the surface. Transmission electron microscopy and X-ray photoemission spectroscopy confirmed that the atomic distribution in CsPbBr₃/PbSe composite clusters is uniform and the composite materials were well formed. The PL intensity of a CsPbBr₃/PbSe sample with a 1:1 Cs:Se ratio maintained 50% of its initial intensity after keeping the sample for 81 h in air, while the PL intensity of CsPbBr₃ reduced to 20% of its initial intensity. Therefore, it is considered that low amounts of Se could improve the stability of CsPbBr₃ quantum dots.     

An ERP software selection process with using artificial neural network based on analytic network process approach

An enterprise resource planning (ERP) software selection is known to be multi attribute decision making (MADM) problem. This problem has been modeled according with analytic network process (ANP) method due to fact that it considers criteria and sub criteria relations and interrelations in selecting the software.Opinions of many experts are obtained while building ANP model for the selection ERP then opinions are reduced to one single value by methods like geometric means so as to get desired results. To use ANP model for the selection of ERP for a new organization, a new group of expert’s opinions are needed. In this case the same problem will be in counter. In the proposed model, when ANP and ANN models are setup, an ERP software selection can be made easily by the opinions of one single expert. In that case calculation of geometric mean of answers that obtained from many experts will be unnecessary. Additionally the effect of subjective opinion of one single decision maker will be avoided. In terms of difficulty, ANP has some difficulties due to eigenvalue and their limit value calculation.An ANN model has been designed and trained with using ANP results in order to calculate ERP software priority. The artificial neural network (ANN) model is trained by results obtained from ANP. It seems that there is no any major difficulty in order to predict software priorities with trained ANN model. By this results ANN model has been come suitable for using in the selection of ERP for another new decision.