Effect of cellulose acetate/cellulose triacetate ratio on reverse osmosis blend membrane performance

Surface functionalization and modification including the grafting process are effective approaches to improve and enhance the reverse osmosis (RO) membrane performance. This work is aimed to synthesize grafted/crosslinked cellulose acetate (CA)/cellulose triacetate (CTA) blend RO membranes using N-isopropylacrylamide (N-IPAAm) as a monomer and N,N-methylene bisacrylamide (MBAAm) as a crosslinker. The morphology of these membranes was analyzed by scanning electron microscopy and their surface roughness was characterized by atomic force microscopy. The performance of these membranes was evaluated through measuring two major parameters of salt rejection and water flux using RO unit at variable operating pressures. It was noted that the surface average roughness obviously decreased from 148 nm for the pure CA/CTA blend membrane with 2.5% CTA to 110 nm and 87 nm for the grafted N-IPAAm and grafted/crosslinked N-IPAAM/MBAAm/CA/CTA-RO membranes, respectively. Moreover, the contact angle decreased from 51.98° to 47.6° and 43.8° after the grafting and crosslinking process. The salt rejection of the grafted CA/CTA-RO membrane by 0.1% N-IPAAm produced the highest value of 98.12% and the water flux was 3.29 L/m²h at 10 bar.     

Reflectarray research at the communications research centre Canada

It has been a decade since a research program began on reflectarray technology at the Communications Research Centre Canada (CRC). This endeavor has demonstrated the advantages and shortcomings of this technology, the issues that ought to be addressed, and future opportunities. This paper summarizes the outcome of this research in the context of projects that have been carried out, and the resulting insight into reflectarray technology. Design methodology, fabrication process, and measurements results will be briefly discussed for each particular development.     

Code generation for a family of executable modelling notations

We are investigating semantically configurable model-driven engineering (MDE). The goal of this work is a modelling environment that supports flexible, configurable modelling notations, in which specifiers can configure the semantics of notations to suit their needs and yet still have access to the types of analysis tools and code generators normally associated with MDE. In this paper, we describe semantically configurable code generation for a family of behavioural modelling notations. The family includes variants of statecharts, process algebras, Petri Nets, and SDL88. The semantics of this family is defined using template semantics, which is a parameterized structured operational semantics in which parameters represent semantic variation points. A specific notation is derived by instantiating the family’s template semantics with parameter values that specify semantic choices. We have developed a code-generator generator (CGG) that creates a suitable Java code generator for a subset of derivable modelling notations. Our prototype CGG supports 26 semantics parameters, 89 parameter values, and 7 composition operators. As a result, we are able to produce code generators for a sizable family of modelling notations, though at present the performance of our generated code is about an order of magnitude slower than that produced by commercial-grade generators.     

HamleDT: Harmonized multi-language dependency treebank

We present HamleDT—a HArmonized Multi-LanguagE Dependency Treebank. HamleDT is a compilation of existing dependency treebanks (or dependency conversions of other treebanks), transformed so that they all conform to the same annotation style. In the present article, we provide a thorough investigation and discussion of a number of phenomena that are comparable across languages, though their annotation in treebanks often differs. We claim that transformation procedures can be designed to automatically identify most such phenomena and convert them to a unified annotation style. This unification is beneficial both to comparative corpus linguistics and to machine learning of syntactic parsing.     

Hydrodesulfurization of model diesel using Pt/Al2O3 catalysts prepared by supercritical deposition

Pt/Al₂O₃ catalysts with Pt loadings ranging from 0.5 to 11 wt.% were synthesized by supercritical carbon dioxide (scCO₂) deposition method. Transmission electron microscopy (TEM) images showed that the synthesized catalysts contained small Pt nanoparticles (1–4 nm in diameter) with a narrow size distribution, no observable agglomeration, and uniformly dispersed on the alumina support. The catalysts were found to be active for hydrodesulfurization of dibenzothiophene (DBT) dissolved in n-hexadecane (n-HD) without sulfiding the metal phase. The reaction proceeded only via the direct hydrogenolysis route in the temperature range 310–400 °C and at atmospheric pressure. The activity increased with increasing the metal loading. Increasing [H₂]₀/[DBT]₀ by either increasing [H₂]₀ or decreasing [DBT]₀, increased the DBT conversion. At a fixed weight hourly space velocity and feed concentration, conversion did not increase with increasing temperature beyond 330 °C. The presence of toluene inhibited the catalyst activity presumably due to competitive adsorption between DBT and toluene. Under the operating conditions, the reaction was far from equilibrium.     

A cost-effective lexical acquisition process for large-scale thesaurus translation

Thesauri and controlled vocabularies facilitate access to digital collections by explicitly representing the underlying principles of organization. Translation of such resources into multiple languages is an important component for providing multilingual access. However, the specificity of vocabulary terms in most thesauri precludes fully-automatic translation using general-domain lexical resources. In this paper, we present an efficient process for leveraging human translations to construct domain-specific lexical resources. This process is illustrated on a thesaurus of 56,000 concepts used to catalog a large archive of oral histories. We elicited human translations on a small subset of concepts, induced a probabilistic phrase dictionary from these translations, and used the resulting resource to automatically translate the rest of the thesaurus. Two separate evaluations demonstrate the acceptability of the automatic translations and the cost-effectiveness of our approach.

Effect of substrate bias on the properties of plasma deposited organosilicone (pp-HMDSN) thin films

Organosilicone thin films have been deposited by plasma polymerization (pp) in a plasma enhanced chemical vapor deposition (PECVD) system using hexamethyldisilazane (HMDSN:C6H19Si2N) as a monomer precursor, at different biases of the stainless-steel substrate holder. The substrate bias affected film thickness, surface morphology, chemical composition and photoluminescence (PL) emission. For a negatively biased substrate, it is found that the film thickness is the minimum, while the porosity and PL emission are the maximum. For a positively biased substrate, the thickness and the ratio of Si/N are the maximum which correspond to a blue shift of the PL emission in comparison with the case of non-biased grounded substrate. In addition, the characterization of the plasma using a single cylindrical Langmuir probe has been performed to obtain information about both the electron density and the positive ion energy, where it can be concluded that the ion energy plays a major role in determining film thickness.     

A short note on the effect of sample size on the estimation error in Cp

Process capability indices such as C_p are used extensively in manufacturing industries to assess processes in order to decide about purchasing. In practice, the parameter for calculating C_p is rarely known and is frequently replaced with estimates from an in-control reference sample. This article explores the optimal sample size required to achieve a desired error of estimation using absolute percentage error of different C_p estimates. Moreover, some practical tools are created to allow practitioners to find sample size in different situations.     

维药资源库化合物结构检索系统的设计与实现

基于B/S模式,利用JSP Web开发技术,采用一种新的技术路线在维吾尔药资源化合物数据库上设计和实现了一个化合物结构检索系统.系统用C++编程实现了VF2算法,作为DLL提供给系统进行JNI调用,从而实现了化合物的结构检索.系统同时实现了匹配结构的二维和三维动态显示.测试结果表明,该系统运行安全可靠,完全可以应用于实际工作中.     

Multi-product multi-chance-constraint stochastic inventory control problem with dynamic demand and partial back-ordering: A harmony search algorithm

In this paper, a multiproduct inventory control problem is considered in which the periods between two replenishments of the products are assumed independent random variables, and increasing and decreasing functions are assumed to model the dynamic demands of each product. Furthermore, the quantities of the orders are assumed integer-type, space and budget are constraints, the service-level is a chance-constraint, and that the partial back-ordering policy is taken into account for the shortages. The costs of the problem are holding, purchasing, and shortage. We show the model of this problem is an integer nonlinear programming type and to solve it, a harmony search approach is used. At the end, three numerical examples of different sizes are given to demonstrate the applicability of the proposed methodology in real world inventory control problems, to validate the results obtained, and to compare its performances with the ones of both a genetic and a particle swarm optimization algorithms.