Synthesis of polymers and copolymers of c-(Nϵ-AcrLys-Gly) and interactions with metal ions in solution

A vinyl compound carrying a cyclic dipeptide in the side chain, c-(N^?-AcrLys-Gly), has been synthesized and polymerized using radical initiators. The homopolymer was soluble only in water, Me₂SO, $\text{H}{}_2\text{O}\text{Me}{}_2\text{SO}$ and $\text{H}{}_2\text{O}\text{HCONMe}{}_2$. In the latter solvent, an initially clear solution became turbid upon standing. Copolymers with styrene were prepared and a styrene-rich fraction was found to be soluble in a variety of organic solvents. However, the reduced viscosity of a HCONMe₂ solution of the copolymer increased with dilution. CH₂Cl₂-soluble copolymers extracted barium picrate and NaBPh₄ from aqueous solution, and copolymer gels swollen in dioxane bound NaBPh₄ effectively. Metal salt binding should have resulted from the ion-dipole interaction between Ba²⁺ or Na⁺ and cyclic dipeptides. However, the polymer effect due to the intramolecular cooperation of cyclic dipeptides upon ion binding was not quantitatively estimated.     

Conformational studies of poly(N-methyl-l-alanine) by n.m.r. spectroscopy

Nuclear magnetic resonance (n.m.r.) and circular dichroism of $\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ in methylene $\text{chloride}\text{-d}{}_2\text{dichloroacetic acid}$ were investigated. In methylene chloride-d₂$\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ was found to consist of nearly all-trans amide bonds and assume a stable secondary structure. Trace amounts of cis amide bonds were also present. The addition of dichloroacetic acid destroyed the secondary structure and induced a drastic change of the n.m.r. spectrum, which was similar to that observed with the monomeric amide, $\text{N-}\text{acetyl}\text{-N-}\text{methyl-}\text{l}\text{-alanine}$ dimethylamide. In comparison of the polymer with the monomeric amide, it was concluded that the transition of $\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ was caused by the isomerization of amide bonds. The complex n.m.r. spectrum was interpreted in terms of the distribution along the polymer chain of various non-planar amide links as well as planar cis and trans amide links. The difference of the mechanism of conformational transition between poly(amino acid) and poly(imino acid) is also discussed.     

Multifunctional Initiator with Platinum-Acetylide Dendritic Core for Living Polymerization of Isocyanides

A novel multifunctional initiator has been developed by peripheral modification of a Pt-acetylide dendrimer. Pd–Pt μ-ethynediyl units were introduced to the first-generation dendrimer by a divergent method. The dendritic initiator was applicable to the living polymerization of aryl isocyanides, producing high molecular weight polymers with a narrow polydispersity index in quantitative yields. The ³¹P NMR spectrum of the resulting polymer suggested that all Pd–Pt μ-ethynediyl units in the dendritic molecule actually functioned as an initiator.     

Improvement of cyclic behavior of a ball-milled SiO and carbon nanofiber composite anode for lithium-ion batteries

The cyclic performance of a composite SiO and carbon nanofiber (CNF) anode was examined for lithium-ion batteries. SiO powder of several micrometers was pulverized using high energy mechanical milling. The SiO was ball-milled for 12 h with CNF to produce a composite electrode material that exhibited excellent cycling performance. A reversible capacity of approximately 700 mAh g⁻¹ was observed after 200 cycles. The excellent cyclic performance was discussed with respect to the change of the valence state of Si by ball-milling. A large irreversible capacity at the first cycle for the SiO/CNF composite electrode was reduced to 2% by chemically pre-charging with a lithium film attached to the rim of the electrode.     

Preparation of Cu(In,Ga)(S,Se)2 thin films by sequential evaporation and annealing in sulfur atmosphere

Cu(In,Ga)(S,Se)₂ thin films with high Ga/III ratio (around 0.8) were prepared by sequential evaporation from CuGaSe₂, CuInSe₂, In₂Se₃ and Ga₂Se₃ compounds and then annealing in H₂S gas atmosphere. The annealing temperature was varied from 400 to 500 °C. These samples were characterized by means of XRF, EPMA, XRD and SEM. The S/(S+Se) mole ratio in the thin films increased with increase in the annealing temperature, keeping the Cu, In and Ga contents nearly constant. The open circuit voltage increased and the short circuit current density decreased with increase in the annealing temperature. The best solar cell using Cu(In,Ga)(S,Se)₂ thin film with Ga/(In+Ga)=0.79 and S/(S+Se)=0.11 annealed at 400 °C demonstrated V_oc=535 mV, I_sc=13.3 mA/cm², FF=0.61 and efficiency=4.34% without AR-coating.     

Microbial degradation of cyanobacterial cyclic peptides

Bacterial strain B-9 possesses hydrolytic enzymes capable of degrading microcystins (MCs) and nodularin that are toxic cyclic peptides produced by cyanobacteria. In the present study, the degradation activities of the cell extract of B-9 against non-toxic cyanobacterial cyclic peptides other than the MCs and nodularin were investigated, and the degradation products were analyzed by liquid chromatography/ion trap tandem mass spectrometry (LC/ITMS). It was confirmed that B-9 could also degrade these cyanobacterial cyclic peptides by hydrolysis of their peptide bonds. These results indicated that this bacterium possesses a very unique hydrolytic activity that can degrade structurally different cyclic peptides and that this may be effective for the detoxification of hazardous cyclic peptides.     

Habitual coffee consumption and blood pressure: A study of self-defense officials in Japan

The degree of fat hydrogenation and the trans fatty acid content of the diet affect the fatty acid composition of membranes, and the amount and the activity of some membrane enzymes. We describe the effects of four isocaloric diets containing either sunflower oil (SO, 0% trans), fish oil (FO, 0.5% trans), partially hydrogenated fish oil (PHFO, 30% trans), or highly hydrogenated fish oil (HHFO, 3.6% trans) as fat sources on the lipid composition and the trans fatty acid content of rat hepatic microsomes. We also describe the effect of these diets on the cytochrome P-450 content and on the aminopyrine N-demethylase, aniline hydroxylase, and UDP-glucuronyl transferase microsomal activities. Cytochrome P-450 content was dependent on the degree of unsaturation of the diet, being higher for the FO-containing diet and lower for the HHFO diet. Aminopyrine N-demethylase activity also correlated with the degree of unsaturation of the diet as did the cytochrome P-450 content did (FO > SO > PHFO > HHFO). Aniline hydroxylase activity appeared to be independent of the degree of unsaturation of the dietary fat, but correlated with the trans fatty acid content of the diet, which was also reflected in the trans content of the microsomal membranes. UDP-glucuronyl transferase activity was higher for the FO-containing diet than for the SO diet, showing intermediate values after the PHFO and HHFO diets.     

Measurement and correlation of mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems

The mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems were measured using a sorption apparatus with a quartz spring at 100 and 130°C for mass fractions of n-nonane ranging from 0 to 0.16. The mutual diffusion coefficients were correlated with good agreement by the free-volume theory.     

Carbon anode for dry-polymer electrolyte lithium batteries

A spherical carbon material of meso-carbon microbead (MCMB) was examined as an anode in a polyethylene oxide (PEO) based polymer electrolyte lithium battery. The electrochemical performance of the carbon electrode with the polymer electrolyte depended on the electrode thickness and the particle size of MCMB. The 30 μm-thick electrode of MCMB with the particle size of 20–30 μm showed a reversible capacity comparable with that in a liquid electrolyte, but the 100 μm-thick electrode showed a half of the 30 μm-thick electrode. The smaller particle size of 5–8 μm exhibited a high irreversible capacity at the first charge–discharge cycle. The reaction heat between MCMB and the polymer electrolyte was 0.5 J mAh^?1, which was much lower compared to those between lithium metal and the polymer electrolyte, 1.2 J mAh^?1, and MCMB and conventional liquid electrolyte, 4.3 J mAh^?1.