Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

The cranial MRI in severe cerebral palsy: a comparative study with clinical data

The magnetic resonance examination was performed in 38 patients with severe cerebral palsy (CP; 15 males and 23 females) who had both motor delay (unable to move anywhere) and mental retardation (I. Q or D. Q below 30). Neuroimaging findings were compared with the CP type, etiology, and grade of understanding of language. Cranial magnetic resonance imagings (MRI) in CP were divided into five types. Type 1 : nine predominantly showed cyst-liked ventricles and periventricular hyperintensity on T2-weighted imaging (PVH) and only scarred basal ganglia and thalamus were visible. All suffered from neonatal asphyxia and the clinical type was rigospastic tetraplegia (RST). Type 2: eleven predominantly showed PVH and hyperintensity on T2-weighted (HT2) in basal ganglia and thalamus. All suffered from neonatal asphyxia and the clinical type was RST or rigospastic diplegia. Type 3: five showed PVH and three had cortical atrophy. All suffered from neonatal asphyxia and the clinical type was spastic diplegia. Type 4: four predominantly showed HT 2 in putamen and thalamus. Three had cortical atrophy. All suffered from neonatal asphyxia. The clinical type was athetotic CP (ATH). Type 5: nine predominantly showed HT 2 in globus pallidus. Four had cortical atrophy and two had hippocampal atrophy. All suffered from neonatal jaundice and the clinical type was ATH. All patients who suffered from neonatal asphyxia and spastic CP had MRI in PVH. All patients who suffered from neonatal asphyxia and ATH showed HT 2 in putamen and thalamus. Almost patients who suffered neonatal jaundice and ATH showed HT 2 in globus pallidus. With athetotic CP, cases with atrophy of the cerebral cortex or/and hippocampus were lower grade of understanding of language than no atrophy of both. The result of studies of MRI are in agreement with neuropathological findings.     

Synthesis of polymeric microspheres employing SPG emulsification technique

Relatively uniform polymeric microspheres, the coefficients of variation being close to 10%, were obtained by the BPO-initiated suspension polymerization of styrenic monomers. Unlike the conventional stirred-tank system, a particular microporous glass membrane (SPG) provided uniform monomer droplets continuously when monomer was allowed to permeate through the micropores. The monomer droplets were suspended in an aqueous solution containing the stabilizing agents, transferred to a stirred vessel, and polymerized. Up to 10μm spheres, of a far narrower size distribution than those obtained by conventional microsuspension polymerization spheres, were obtained. The initial droplet size and distribution were retained with the successful suppression of secondary particle nucleation by the addition of hydroquinone in the aueous phase. Crosslinked polystyrene spheres were also synthesized in the presence of various low-molecular-weight diluents. While a good solvent, toluene, was not so effective; poor solvents, n-heptane and n-heptane, easily yielded the microporous structure, the specific surface area being as high as 160 m²/g. © 1994 John Wiley & Sons, Inc.     

Morphological study by TEM on uniaxially oriented thin films of PET, PEN and their blends

Uniaxially oriented thin films of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) and their blends were prepared by applying shear strain to their respective melts, and the resulting morphologies were studied by transmission electron microscopy. Selected-area electron diffraction of each film revealed well-defined uniaxial orientation of polymer chains in the shearing direction. In the uniaxially oriented thin film of PEN, stacked-lamellar structure with the average long period of 27 nm consisting of a crystalline region about 15 nm thick and an amorphous one about 12 nm thick was found here and there in the dark-field image: PEN-type. On the other hand, stacked-lamellar structure was rarely observed in the case of PET: PET-type. In PET/PEN blends, the morphologies changed from the PET-type to the PEN-type with increasing content of PEN.     

具有硬核—软壳结构的丙烯酸聚合物乳液的研究

利用种子乳液聚合法合成了具有硬核—软壳结构的丙烯酸聚合物微粒子,通过对种子粒子数和最终粒子数的理论计算,并结合最低成膜温度(MFT)的测试结果,描述了聚合物微粒子的聚合过程,同时,还对聚合物乳液的各项性能进行了研究。     

A new learning method using prior information of neural networks

In this paper, we present a new learning method using prior information for three-layer neural networks. Usually when neural networks are used for identification of systems, all of their weights are trained independently, without considering interrelated weights values. Thus, the training results are usually not good. The reason for this in that each parameter has its influence on others during learning. To overcome this problem, we first give an exact mathematical equation that describes the relation between weight values given a set of data conveying prior information. The we present a new learning method that trains part of the weights and calculates the others using these exact mathematical equations. This method often a priori keeps the given mathematical structure exactly the same during learning; in other words, training is done so that the network follows a predetermined trajectory. Numerical computer simulation results are provided to support this approach. This work was presented, in part, at the Fourth International Symposium on Artificial Life and Robotics, Oita, Japan, January 19–22, 1999.     

A Quasi-ARMAX approach to modelling of non-linear systems

This paper proposes a class of quasi-ARMAX models for non-linear systems. Similar to ordinary non-linear ARMAX models, the quasi-ARMAX models are flexible black-box models, but they have various linearity properties similar to those of linear ARMAX models. A modelling scheme is introduced to construct models consisting of two parts: a macro-part and a kernel-part. By using Taylor expansion and other mathematical transformation techniques, it is first constructed as a class of quasi-ARMAX interfaces (macro-parts) that have various linearity properties but contain some complicated coefficients. MIMO neurofuzzy models (kernel-parts) are then introduced to represent the complicated coefficients. It is shown that the proposed quasi-ARMAX models have both good approximation ability and some easy-to-use properties. The proposed models have been successfully applied to prediction, fault detection and adaptive control of non-linear systems.     

A FAST METHOD OF RADIATIVE HEAT TRANSFER ANALYSIS BETWEEN ARBITRARY THREE-DIMENSIONAL BODIES COMPOSED OF SPECULAR AND DIFFUSE SURFACES

The radiation element method by ray emission model (REM²) has been improved by using the law of reciprocity for the specular view factor and the incomplete Cholesky conjugate gradient (ICCG) method to reduce computational time. This improved method was applied to analyze the radiative heat transfer between arbitrary three-dimensional bodies composed of specular and diffuse surfaces. The accuracy of the improved method was evaluated by comparing analytical solutions. And the method was used to calculate radiative heat transfer between machine elements and heater panels. CPU time to calculate the radiative exchange for a model composed of 3193 elements was reduced to 1/430 of that by the previous numerical method using a decomposition method.     

A Study on the Effect of Air on the Dynamic Motion of a MEMS Device and Its Shape Optimization

The authors propose a new design concept for controlling the deflection of a micro-membrane with the aid of its thickness distribution for realizing a prescribed design in the MEMS. As an example, the authors treat a micro air pump that comprises a micro-membrane. The membrane is actuated by an electrostatic force. The membrane deflects and thus the deflection is influenced by the air pressure and the electrostatic field. This is a highly complicated system. To find out a proper thickness distribution, the authors use the genetic algorithm that is appropriate to reduce the searching space of solution.     

PEI-assisted preparation of Au nanoparticles via reductive crystallization process

Nano-sized gold particles were prepared in a solution containing polyethylenimine (PEI) utilizing a batch reactor. PEI acts as a reducing agent as well as a stabilizing agent of nanoparticles. The effects of initial concentration of PEI on the mean particle diameter, coefficient of variation (C.V.), growth rate, nucleation rate and the number of nuclei were studied. The particle diameter of gold decreased markedly with increasing initial concentration of PEI, from 3.3 μm to a minimum value of about 5 nm. The observed decrease of particle diameter was considered to be caused by the growth-inhibiting effect of PEI, which affects the conclusive number of nuclei.