Supramolecular Zn(II)-Dipicolylamine-Azobenzene-Aminocyclodextrin-ATP Complex: Design and ATP Recognition in Water

Cyclodextrins (CyDs) are water-soluble host molecules possessing a nanosized hydrophobic cavity. In the realm of molecular recognition, this cavity is used not only as a recognition site but also as a reaction medium, where a hydrophobic sensor recognizes a guest molecule. Based on the latter concept, we have designed a novel supramolecular sensing system composed of Zn(II)-dipicolylamine metal complex-based azobenzene (1-Zn) and 3A-amino-3A-deoxy-(2AS,3AS)-γ-cyclodextrin (3-NH₂-γ-CyD) for sensing adenosine-5′-triphosphate (ATP). 1-Zn showed redshifts in the UV-Vis spectra and induced circular dichroism (ICD) only when both ATP and 3-NH₂-γ-CyD were present. Calculations of equilibrium constants indicated that the amino group of 3-NH₂-γ-CyD was involved in the formation of supramolecular 1-Zn/3-NH₂-γ-CyD/ATP. The Job plot of the ICD spectral response revealed that the stoichiometry of 1-Zn/3-NH₂-γ-CyD/ATP was 2:1:1. The pH effect was examined and 1-Zn/3-NH₂-γ-CyD/ATP was most stable in the neutral condition. The NOESY spectrum suggested the localization of 1-Zn in the 3-NH₂-γ-CyD cavity. Based on the obtained results, the metal coordination interaction of 1-Zn and the electrostatic interaction of 3-NH₂-γ-CyD were found to take place for ATP recognition. The “reaction medium approach” enabled us to develop a supramolecular sensing system that undergoes multi-point interactions in water. This study is the first step in the design of a selective sensing system based on a good understanding of supramolecular structures.     

Tuning-current splitting network for three-section DBR lasers

A simple current-splitting network for DBR-laser frequency tuning is proposed that distributes a single control current among two tuning sections and can adjust the current distribution without yielding impedance mismatching. The nonlinear characteristics of the tuning sections realise the non-proportional current splitting suitable for continuous tuning; 470 GHz (3.8 nm) tuning range is achieved     

Differential modes of nuclear localization signal (NLS) recognition by three distinct classes of NLS receptors

The targeting of karyophilic proteins to nuclear pores is mediated via the formation of a nuclear pore-targeting complex, through the interaction of nuclear localization signal (NLS) with its NLS receptor. Recently, a novel human protein, Qip1, was identified from a yeast two-hybrid system with DNA helicase Q1. This study demonstrates that Qip1 is a novel third class of NLS receptor that efficiently recognizes the NLS of the helicase Q1. Moreover, the data obtained in this study show that the specific interaction between Qip1 and the NLS of the helicase Q1 requires its upstream sequence of the minimal essential NLS. By using purified recombinant proteins alone in the digitonin-permeabilized cell-free transport system, it was demonstrated that the two known human NLS receptors, Rch1 and NPI-1, are able to transport all the tested NLS substrates into the nucleus, while Qip1 most efficiently transports the helicase Q1-NLS substrates, which contain its upstream sequence in so far as we have examined the system. Furthermore, in HeLa cell crude cytosol, it was found that endogenous Rch1 binds to all the tested NLS substrates, while the binding of endogenous NPI-1 is restricted to only some NLSs, despite the fact that NPI-1 itself shows binding activity to a variety of NLSs. These results indicate that at least three structurally and functionally distinct NLS receptors exist in the human single cell population, and suggest that the nuclear import of karyophilic proteins may be controlled in a complex manner at the NLS recognition step by the existence of a variety of NLS receptors with various specificities to each NLS.     

Immunohistochemical demonstration of 3,2''-dimethyl-4-aminobiphenyl DNA adduct formation in various organs of Syrian golden hamsters

We attempted to purify endogenous growth factors of chick embryonal retinal pigment epithelial cells from bovine neural retina. Ammonium sulfate precipitation, gel filtration, and anion exchange column chromatography were used. Though only partially purification, bovine retinal extract had two effects, growth and transformation, on chick embryonal pigment epithelial cells. We think that these purified factors may be novel from the estimation of their molecular weight by gel filtration.     

Performance of compression/absorption hybrid refrigeration cycle with propane/mineral oil combination

This paper discusses the feasibility of a vapor compression/absorption hybrid refrigeration cycle for energy saving and utilization of waste heat. The cycle employs propane as a natural refrigerant and a refrigeration oil as an absorbent. A prototype of the cycle is constructed, in which a compressor and an absorption unit are combined in series. The performance of the cycle is examined both theoretically and experimentally. Although the solubility of the propane with the oil is not enough as a working pair in the absorption unit, the theoretical calculation shows that the hybrid cycle has a potential to achieve a higher performance in comparison with a simple vapor compression cycle by using the waste heat. In the experiment, the prototype cycle is operated successfully and it is found that an improvement of an absorber is necessary to achieve the good performance close to the theoretical one. The application of an AHE (absorber heat exchanger) can reduce the heat input to a generator. Further examinations on some other combinations of refrigerant/refrigeration oil and additives are desirable.     

OA&M framework for multiwavelength photonic transport networks

Photonic networks based on wavelength division multiplexing (WDM) and optical path technologies are expected to realize flexible, transparent, and cost-effective transport networks with a large transmission capacity. This paper explores the design framework of photonic transport networks taking into consideration the operation administration and maintenance (OA&M) functions required for the successful introduction of WDM systems based on the optical path concept. From the view point of network maintenance, clear distinction is made between the optical path layer and the optical section layer to facilitate accurate and smooth failure localization. The digital multiplexing span between physical multiplexing interfaces at the end-to-end digital nodes should have the same maintenance span as the corresponding optical path. We argue that cooperative maintenance by OA&M functions at both the digital and optical layers can be a practical way of network supervision. A supervisory (SV) signal transfer method and a configuration that is suitable for the terrestrial trunk network are also indicated. As an example, a practical SV system design methodology and an actual procedure developed for a single channel optical transmission system based on optical in-line amplifiers are introduced. Furthermore, application of the developed SV system and network restoration schemes is discussed for future WDM-based photonic networks. The OA&M aspects introduced will be valuable for creating future photonic network systems     

Septic cholangitis occurring 11 years after inadvertent ligation of the right hepatic duct during cholecystectomy: a case report

We report a case of acute cholangitis caused by the inadvertent ligation of the right hepatic duct during a cholecystectomy performed 11 years before. When the condition of the right hepatic duct or accessory bile duct ligation persists for more than several years, resulting in atrophy of the relevant part of the liver, bile duct ligation will rarely cause severe clinical problems. However, acute cholangitis may occur, as in our patient, so long-term follow-up of the patient is warranted.     

A pre-heating vaporization technology of coal-water-slurry for the gasification process

A pre-heating vaporization technology of coal water slurry, CWS, was developed to increase the efficiency of coal gasification with the reduction of oxygen consumption. A CWS pre-heating experimental unit having a capacity of 2.0 tons-coal/day was manufactured. After the CWS was heated to 573 K at about 10 MPa, water in CWS was continuously vaporized in a tube of which the diameter increased gradually (2–10 mm I.D.), and dry coal particles with steam were atomized and fed to a vessel. No aggregation of coal particles was observed in the atomized samples. The temperature and the pressure distributions of the fluid were calculated with empirical heat transfer and pressure drop correlations. The calculated results well corresponded to the experimental data measured in some test points. Using the calculation model, a large scale apparatus of 100 tons-coal/day was designed using KNO₃ + NaNO₂ + NaNO₃ molten salt as a heating medium.     

Effect of molecular weight on molecular orientation and morphology of polypropylene sheets containing a β-nucleating agent

In this study, polypropylene (PP) films containing the β nucleating agent, N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide, were prepared using PP with three different molecular weights (low, medium, and high) by extrusion process with T-shaped die. The structure and morphology of the films were studied after stretching. It was found that a unique molecular orientation, in which both the c-axis and crystalline lamellae were oriented perpendicular to the flow direction, was formed in all undrawn film samples, irrespective of the molecular weights of the PP. In the PP sheets stretched in the machine direction, the low-molecular-weight sample containing the nucleating agent exhibited brittle properties owing to a lack of tie chains in the stretching direction. In contrast, cavitation was prominent in the medium (M-PP)- and high (H-PP)-molecular-weight samples. Notably, M-PP containing the nucleating agent, with a high degree of molecular orientation, promoted the formation of a large number of voids. In H-PP containing the nucleating agent, the presence of numerous tie chains inhibited cavitation, resulting in fewer voids. The experimental results demonstrated the influence of the molecular weight on the void structure, which will be useful in the field of microporous membranes.     

Dominant stress region for crack initiation at interface edge of microdot on a substrate

In order to examine the mechanics of crack initiation at the free interface edge of a microcomponent on a substrate, delamination tests are carried out for two specimen shapes of Cr microdots on a SiO₂ substrate. The microdots of the first specimen are shaped like the frustum of a round cone. The Cr microdots are successfully delaminated from the SiO₂ substrate in a brittle manner and the critical load is measured by atomic force microscopy (AFM) with a lateral loading apparatus. Stress analysis reveals that a singular stress field exists near the interface edge and the strength for the crack initiation is governed by the intensified normal stress field. The critical stress intensity parameter is evaluated as K_σC ≈ 0.24 MPa m^0.39. Similar delamination tests are conducted for microdots shaped like the frustum of an oval cone. The stress distributions at the crack initiation of this specimen shape show a higher normal stress than the first specimen shape in the region near the interface edge of about x < 40 nm, while it is lower in the region of about x > 50 nm (x: distance from the edge). This suggests a limitation of conventional fracture mechanics: namely, the crack initiation in these specimens is not uniquely governed by the intensity of the singular field. It is found that the delamination crack is initiated when the averaged stress σ_ya in the region of 90-130 nm reaches 190-270 MPa, regardless of the specimen shape. This indicates that the dominant stress region of crack initiation is roughly estimated as 90-130 nm and the criterion is given in terms of the averaged stress in the region.