Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO2 absorption

A mechanistic model is developed to investigate the influence of an activator on the corrosion rate of carbon steel in the absorption processes of carbon dioxide (CO₂). Piperazine (PZ) is used as the activator in diethanolamine (DEA) aqueous solutions. The developed model for corrosion takes into consideration the effect of fluid flow, transfer of charge and diffusion of oxidizing agents and operating parameters like temperature, activator concentration, CO₂ loading and pH. The study consists of two major models: Vapor-liquid Equilibrium (VLE) model and electrochemical corrosion model. The electrolyte-NRTL equilibrium model was used for determination of concentration of chemical species in the bulk solution. The results of speciation were subsequently used for producing polarization curves and predicting the rate of corrosion occurring at the surface of metal. An increase in concentration of activator, increases the rate of corrosion of carbon steel in mixtures of activated DEA.     

Effects of electromagnetic near-field stress on SiGe HBT’s reliability

In this paper, a reliability damage mechanism was presented in SiGe Heterojunction Bipolar Transistor (HBT). This new stress methodology differs from conventional SiGe, HBT device reliability associated with other stresses, since it was obtained by applying electromagnetic near-field aggression. The near-field set-up is used to disturb with electromagnetic field the Device Under test (DUT) on a localized area. Degradations in the base current and the current gain are identified. They are induced by a large base current leakage due to hot carrier which introduces generation/recombination trap centers at the silicon–oxide interface of the emitter–base spacer. By using the S-parameters measurements, we find that both forward transmission scattering parameter (S₂₁) and the input scattering parameter (S₁₁) are affected by this stress. In addition the power characteristics of DUT are also affected by stress. A Direct Power Injection (DPI) method is used to understand the near-field stress behaviour.     

Recent advances and developments in advanced green porous nanomaterial for sustainable energy storage application

Journal of Porous Materials - Compared with traditional battery and super capacitor materials, nanomaterials can significantly improve ion transport and electron conductivity. There are many...     

Effect of nano silver coating on thermal protective performance of firefighter protective clothing

The main aim of this experimental work is to find out possible improvement in thermal protective performance of firefighter protective clothing when subjected to different level of radiant heat flux density. Firefighter protective clothing normally consists of three layers: outer shell, moisture barrier and thermal liner. When thermal protective performance of firefighter protective clothing is enhanced, the time of exposure against radiant heat flux is increased, which will provide extra amount of time to firefighter to carry on their work without suffering from severe skin burn injuries. In this study, the exterior side of outer shell was coated with nano-silver metallic particle through magnetron sputtering technology. Coating of outer shell with nano-silver particles was performed at three level of thickness, i.e. 1, 2 and 3?µm, respectively. All the uncoated and silver coated specimens were then characterized on air permeability tester, Permetest and radiant heat transmission machine. It was observed that coating has insignificant difference on the air and water vapor permeability of specimen and a significant decline was recorded for the value of transmitted heat flux density Q_c (kW/m²) and percentage transmission factor (%TF Q_o) as compared to uncoated specimen when subjected to 10 kW/m² and 20?kW/m² indicating improvement of thermal protective performance. These values go on further reduction with increase in thickness of coating layer of nano-silver particles.     

A comparative study of voltage controllers for series active power filter

The series active power filter seems an ideal device to improve power quality. It allows to suppress and isolate voltage based distortion such as voltage unbalance, sag, interruption and voltage harmonics. In this paper, the determination of voltage references for series active power filter based on a robust three Phase digital Locked Loop system is analysed. Different control strategies are evaluated. In first hand, performances of two linear regulators: a polynomial controller based on a pole placement theory (called RST controller) and a Proportional Integral Derivative (PID) controller are studied and compared, in order to compensate different voltage perturbations in network. In second hand, a novel hysteresis band voltage control for a series active power filter is proposed to derive the switching signals and to improve the power quality. The study was carried on simulation via software Matlab/Simulink.     

Exploring the efficacy of AHA–BHA infused nanofiber skin masks as a topical treatment for acne vulgaris

This study investigates the efficacy of AHA–BHA infused nanofiber skin masks as a topical treatment for acne vulgaris. The skin is a vital organ that functions as a barrier to protect the body from external substances. In recent years, there has been a growing emphasis on skin treatment research. Hyaluronic acids (HAs) are commonly used in cosmetic and drug formulations to regulate excessive skin cornification, making them promising candidates for acne treatment. The introduction of HAs in dermatology has revolutionized the field of skin care, and they are used to treat various skin disorders, such as acne, ichthyosis, keratoses, warts, psoriasis, and photoaged skin. The antiaging benefits of HA have gained considerable attention in cosmetic dermatology, resulting in a surge in cosmetic products and skin care systems that contain HA. The study found that AHA–BHA-infused nanofiber skin masks are effective in treating acne vulgaris. The nanofiber masks were found to reduce inflammation, sebum production, and acne lesions. The study suggests that AHA–BHA-infused nanofiber skin masks could be a promising topical treatment for acne vulgaris.     

Study of elastomers behavior at rupture based on the first Seth strain measures invariant

In this work, we are interested in the study of the mechanical behavior of the elastomers materials. We analyze mainly their ultimate properties. This study is based on the first Seth strain measures invariant [1] and the literature experimental data [2] and [3], allowing to take into account of the multiaxial loading effects. With this intention, the step that we adopted is translated by the division of this work into two parts:In the first time, we developed the relation of Seth–Hill based to the strain measures. In the second time, we exposed the principal experimental results used in this work, including versus loading modes (uniaxial tension, equal biaxial tension and biaxial tension), realized on two types of elastomers: a natural rubber (NR) and a styrene butadiene rubber (SBR).Indeed, the installation the first invariant of the Seth strain measures and the experimental results data made it possible to obtain an exploitable data base to determine the non-linear evolution of elastomers behavior at rupture in order to identify its parameter’s materials after.     

Development and mean life of aluminum first-surface mirrors for solar energy applications

Aluminum solar mirrors are an alternative for solar concentrators. This paper presents the first aluminum-surface solar mirrors, which, after 12 years of exposure to the aggressive weather conditions of Mexico City, have a reflectance decrease of only 3% (from 0.85 to 0.82), with only small scratches on the SiO₂ layer. Furthermore, two alternatives are presented for solar aluminum mirrors: mirrors with integrated first and second surfaces and first-surface compound mirrors. Each mirror and its fabrication are described, along with their weather tests. The aluminum first-surface solar mirror lasts for at least 12 years, and is a good alternative material for parabolic troughs, heliostats, CPC, Fresnel technology and dish concentrators.