Power swing analysis in a future metropolitan electric power system on a contingent trip of cryogenic high-power cables

A cryogenic power cable is expected to be capable of carrying bulk power as a main transmission line in a future metropolitan electric power system. It is important to establish a strategy of how to sustain power supply when such a highly densified power supply route trips from the network due to contingency. It is proposed here that the bulk power transmitted by the cryogenic cable could be distributed into the parallel conventional transmission lines by suitable circuit breaker operations in the system. In this process, power-flow routes are forced to be changed with a remarkable modification in the system configuration. In this paper, the power swings associated with the large power-flow change following contingent faults are analyzed by means of a transient network analyzer. It is found that the proposed system modification could be realized without any harmful power swing if the parameters in generators as well as in control devices have conventional magnitudes. It is shown also by simulations that the margin to occurrence in an unstable power swing is left sufficient even if the parameters deviate somewhat from the present magnitudes.     

The temperature dependence of luminescence from a long-lasting phosphor exposed to ionizing radiation

The temperature dependence of luminescence from a long-lasting phosphor (LLP), SrAl₂O₄ : Eu²⁺,Dy³⁺, exposed to ionizing radiation has been measured to understand the LLP luminescence mechanism. Evaluation of the decay constants of the LLP exposed to -, β- or γ-rays at temperatures from 200 to 390 K showed that the decay constant is divided into four components ranging from 10⁻⁴ to 10⁻¹ s⁻¹ with activation energies of 0.02–0.35 eV.

Total luminous intensity from the LLP with changing irradiation temperature has its maximum value around the room temperature. Irradiation at elevated temperature (390 K) has the total luminescence pattern with monotonous decrease as temperature rises. As a result of evaluating the temperature dependence of luminescence, the luminescence mechanism is considered as follows:

Full-size image

 

Improvement of levitation characteristics in a magnetic bearing system using HTSC‐permanent magnet hybrid structure

Magnetic bearing using pinning force of a permanent magnet and a high‐temperature superconductor has been developed. Additional permanent magnet is introduced to increase the levitation force of the magnetic bearing. In this hybrid magnetic bearing system, levitation force is mainly given by the repulsive force of the permanent magnets, and stability for the lateral direction is given by pinning force of the superconductor. The experimental device is developed. A ring‐type superconductor and a bulk one are examined. Levitation characteristics of the hybrid magnetic bearing are measured. The bulk superconductor shows better characteristics of both levitation and lateral stability than the ring one. Levitation force of the hybrid system becomes about twice as large as that of the nonhybrid one. Although, the repulsive force of the permanent magnet decreases the lateral stability of the system, its influence becomes small by choosing an adequate position of the permanent magnets and the superconductor. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 71–77, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10350     

Neutronic and thermodynamic feasibility of UF6-NpF6 fueled transmutation reactor

Transmutation of neptunium, which is contained in radioactive wastes discharged from nuclear reactors, was investigated as a substitutional method for geologic disposal. We proposed a transmutation reactor fueled with a mixture of gaseous ²³³UF₆ and ²³⁷NpF₆. Neutronic and thermodynamic analysis of the reactor revealed the feasibility of the concept. The reactor has two principal advantages: (1) use of the fuel gas enables on-line reprocessing, (2) ²³⁷Np can be transmuted by a high neutron flux. Our calculation indicated that the transmutation rate of ²³⁷Np was 335 g/year/MW_th, which is much larger than the annual yield of ²³²Np in PWR (6.19 g/year/MW_th).     

Ni-Mo alloying of nickel surface by alternating pulsed electrolysis using molybdenum(VI) baths

Electrochemical Ni-Mo alloying of the surface of a nickel substrate was investigated using alternating pulsed electrolysis in an aqueous solution containing only molybdate ions (MoO₄²⁻) as a metal ion component. In this electrochemical process, the nickel substrate was slightly dissolved during the anodic pulses, providing nickel ions into the solution in the vicinity of the substrate, while Ni and Mo were both electrodeposited on the substrate surface during the subsequent cathodic pulses. Through the optimization of anodic and cathodic conditions independently based on a set of direct-current electrolysis data, amorphous Ni-Mo alloy layers were found to be formed at the surface of the nickel substrate by the alternating pulsed electrolysis using the MoO₄²⁻ solution of pH 3.0-5.0. The conditions for Ni-Mo alloy formation were discussed in terms of the dissolving regime of ionic species in the electrolytes determined by an equilibrium calculation.     

Behavior Of Glyoxal During Granular Activated Carbon Treatment

Glyoxal, which was the strong mutagen formed by ozonation of humic substances, was treated with granular activated carbon (GAC) and the behavior of glyoxal was investigated. Glyoxal itself was adsorbed well on GAC at pH 5–7. But, glyoxal increased by GAC treatment of ozonated humic substances when the ozone dose was insufficient to decolorize the humic substances. The precursors of glyoxal may be among other ozonated products which may be changed to glyoxal on GAC.     

Mechanochemically synthesized ZIF-8 nanoparticles blended into 6FDA-TrMPD membranes for C3H6/C3H8 separation

The mixed matrix membranes (MMMs) consisting zeolitic-imidazolate framework-8 (ZIF-8) nanoparticles in a polymer have been of considerable interest in separation applications. The fillers used are mostly synthesized using the solvothermal method. In this study, the ZIF-8 nanoparticles were synthesized using a solvent-less and salt-free mechanochemical method and were added to 6FDA-TrMPD polyimide to prepare MMMs. The single gas permeation of C₃H₆ and C₃H₈ through the MMMs was investigated. The C₃H₆ permeability and C₃H₆/C₃H₈ ideal selectivity of a 20 wt% mechano-synthesized ZIF-8/6FDA-TrMPD MMM were 70% and 32% higher than those of the neat polymer membrane at 0.1 MPa and 308 K, respectively. The C₃H₆/C₃H₈ separation performance of the mechano-synthesized ZIF-8 MMM was similar to that of the conventional solvothermal-synthesized ZIF-8 MMM. This separation performance was in good agreement with the Maxwell model. Temperature and pressure dependence analyses confirmed that the mechano-synthesized ZIF-8 nanoparticles acted as molecular sieves in the MMMs for the C₃H₆ and C₃H₈ permeation.     

Data Center as a Key Player of a District Electric Power and Heat Network System： A Comparison in Urban and Suburb Regions

A DC （data center） demands air-conditioning power as large as the 1/3-1/2 of total electricity consumption. Thus, energy saving of cooling power of DC yields considerable effect on both economic and environmental views. PV （Photovoltaic） and absorption refrigerator with CGS （cogeneration systems） or gas boiler are possible power saving options. The waste warm air from DC would be utilized for greenhouse heating when DC and greenhouse locate near in the suburbs. In this study, the authors develop an energy network model to assess the potential contribution of DC as a major electric power and chilled air consumer as well as the warm air supplier in a district to the energy efficiency improvement. The evaporation heat of LNG （liquefied natural gas） utilization is also considered as well as PV, CGS. This model is applied to the cases of the urban area in Tokyo which involves athletic center, shops and hospital and the suburbs including greenhouse and then compared.     

Correction to: Development of a behavioral trajectory measurement system (Bucket-ANTAM) for organisms moving in a two-dimensional plane

Artificial Life and Robotics -