Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

Influence of high power ultrasound on physical–chemical properties of polypropylene films aimed for food packaging: barrier and contact angle features

Investigation was focused on the impact of high power ultrasound (HPUS), also called thermosonication, on the oxygen permeation properties (permeability, solubility and diffusion coefficients) of barrier films aimed for food packaging. For this purpose, biaxially oriented polypropylene (BOPP) coated with acrylic/polyvinylidene chloride (BOPPAcPVDC) and biaxially oriented coextruded polypropylene (BOPPcoex) were used. The physical–chemical profile of the samples was determined using goniometry. There is a significant impact only of extreme HPUS conditions (the longest time and the highest amplitude) on the permeability, solubility and diffusion coefficients of oxygen through the BOPP films. The highest influence on the oxygen permeability in both investigated BOPP samples involved an HPUS with an amplitude of 100% during a 6 min treatment. However, BOPP samples showed different sensitivities at lower HPUS treatments. © 2017 Society of Chemical Industry     

Polyethylene/Polycaprolactone Nanocomposite Films for Food Packaging Modified with Magnetite and Casein: Oxygen Barrier,Mechanical, and Thermal Properties

Polyethylene (PE) was modified and prepared as double-layer polyethylene/polycaprolactone (PE/PCL) film. Magnetite and casein were added to the PCL-coating film to improve barrier properties and prevent destruction of basic structure of primary polymer PE. Significant improvements were observed with regards to mechanical (tensile strength, elongation at break) and thermal properties, while barrier (O₂ permeability) properties were slightly improved. Overall migration values into acetic acid were lower (from 1 to 4.6 mg/dm²) than the upper limit set by the legislation. Specific migration of iron in PE/PCL-Fe samples is also below (µg/L) specific migration limit value set by the legislation (mg/kg).     

Drain Current Modeling of Tunnel FET using Simpson’s Rule

Silicon - Tunnel Field Effect Transistor can be introduced as an emerging alternate to MOSFET which is energy efficient and can be used in low power applications. Due to the challenge involved in...     

Morphological Study of Products Containing β-Cyclodextrin

β-Cyclodextrin (β-CD) has been applied in various fields of drug formulation. Its presence in powder Paracetamol (PAR) products prepared with different methods (kneading and spray drying) changes the morphology of original drug. The product made by spray drying has nearly isodimensional spherical particles, and potentially better flowability than the kneaded product. Spray drying of PAR product without β-CD shows similar morphology like a product with β-CD, but the particles show a greater inclination to adhesion. The results were obtained by electron microscopic study.     

Metal complexation of thiacrown ether macrocycles by electrospray ionization mass spectrometry

In the present study, electrospray ionization mass spectrometry is used to evaluate the metal-binding selectivities of an array of novel caged macrocycles for mercury(II), lead(II), cadmium(II), and zinc(II) ions. In homogeneous methanol/chloroform solutions as well as extractions of metals from aqueous solution by macrocycles in chloroform, it is found that the type of heteroatom (S, O, N), cavity size, and presence of other substituents influence the metal selectivities. Several of the macrocycles in this study bind mercury ion very selectively and efficiently in the presence of many other metal ions and have an avidity toward mercury that was tunable by the size and combination of heteroatoms in the macrocycle ring and the number of cage groups attached. The extraction mechanism was further investigated by determining the variation in extraction selectivity as a function of the counterions of the mercury salts.     

Development of current limiting arcing horn for prevention oflightning faults on distribution lines

Wire breakage by arc fusion due to lightning flashovers has become a serious problem in Japan as a result of the widespread use of insulated wires as distribution lines. To solve this problem, a current-limiting arcing horn that has a nonlinear resistor element of zinc oxide has been developed. With this element the power follow current is interrupted and conductor arc fusion is prevented. Even in the case of bare wires, this device effectively prevents power-supply service interruptions. The design and performance of the device and its ability to prevent lightning faults on actual distribution lines are described     

Overexpression of the genes of glycerol catabolism and glycerol facilitator improves glycerol conversion to ethanol in the methylotrophic thermotolerant yeast Ogataea polymorpha

Production of fuel ethanol is one of the possible ways to utilize crude glycerol, substantial amounts of which are produced by biodiesel industry. Earlier, we have described construction of the recombinant strains of methylotrophic thermotolerant yeast Ogataea polymorpha with simultaneous overexpression of the genes PDC1 and ADH1, which produced increased amounts of ethanol from glycerol. In this work, we have further improved these strains by overexpression of genes involved either in oxidative (through dihydroxyacetone) or phosphorylative (through glycerol-3-phosphate) pathway of glycerol catabolism, as well as heterologous gene coding for glycerol transporter FPS1 from Komagataella phaffii (formerly, Pichia pastoris). Obtained recombinant strains produced up to 10.7 g/L of ethanol (with ethanol productivity 30 mg/g of biomass/hr and yield 132 mg/g of consumed glycerol) from pure glycerol and up to 3.55 g/L of ethanol (with ethanol productivity 11.6 mg/g of biomass/hr and yield 72.3 mg/g of consumed glycerol) from crude glycerol as a carbon source, which is approximately 15 times more relative to that of the O. polymorpha wild-type strain and 2.2 more relative to the earlier constructed strain.     

A new method in designing compatibility and adhesion of EVA/PMMA blend by using EVA-<Emphasis Type="Italic">g</Emphasis>-PMMA with controlled graft chain length

Atom transfer free radical polymerization (ATRP) was employed in a synthesis of graft polymer EVA-g-PMMA with controlled length of side PMMA chains. Three steps of synthesis: partial hydrolysis of EVA, esterification with chloroacetyl chloride and ATRP grafting were performed to produce EVAOH, macroinitiator EVACl and grafted polymers G8020 (EVA/PMMA?=?80/20 wt%) and G6040 (EVA/PMMA?=?60/40 wt%). FTIR, Raman and NMR spectroscopy were used in the determination of the chemical structure and modification of EVA. Transmitted light and dark field microscopy showed higher affinity for coil formation of EVA-g-PMMA with longer PMMA side chains, i.e. G6040 compatibilizer. Morphological, thermal and adhesive properties of optical fiber adhesives of graft polymers and polymer blends poly(ethylene-co-vinyl acetate)-blend-poly(methyl methacrylate) (EVA/PMMA) compatibilized with 1 wt% of EVA-g-PMMA, were studied. Image analysis of SEM micrographs showed effective compatibilization with short grafted chains (G8020) that was indicated by lower porosity characteristics. TG/DTG analysis enabled determination of degree of hydrolysis and amount of chloro-functionalized groups. DSC analysis showed higher thermal stability of G8020 polymer. Single lap joint of adhesives/optical fibers were subjected to adhesive testing and obtained results for maximal force applied and adhesive failure suggested the visible influence of the length of graft chains on adhesion.