IPv6 delay and loss performance evolution

Although packet delay and loss are two important parameters of the Internet performance, to the best of our knowledge, the evolution of large‐scale IPv6 delay and loss performance has previously not been studied. In this paper, we analyze more than 600 end‐to‐end IPv6 paths between about 26 testboxes of RIPE Network Coordination Centre over two years, and compare the delay and loss performance over time with their IPv4 counterparts. We present and discuss the measurement methodologies and show that IPv6 paths have a higher delay and loss than their IPv4 counterparts. The main reason for the worse performance stems from IPv6‐in‐IPv4 tunnels rather than from native IPv6 paths and such tunnels are still widely used today. Copyright © 2007 John Wiley & Sons, Ltd.     

Ammoxidation of toluene over Y-Ba-Cu-Co-O perovskites

Ammoxidation of toluene over the perovskites YBa₂Cu₃O_6.1, YBa₂Cu₂CoO_6.7 and YBaCuCoO_4.9 was investigated at 400 °C. At low partial pressures of O₂ benzonitrile was selectively formed, while CO₂ was the main product at high pressures of O₂. Systematic differences in activity were observed for the three phases and are related to the crystal contents of Cu and Co. At low O₂ pressures, Cu-sites are active for nitrile formation, while Co-sites give CO₂. At high O₂ pressures, the activity for CO₂ of Cu-sites increases more than that of Co-sites due to filling of near-surface oxygen vacancies.     

A new device for coating single particles under controlled conditions

A new device for coating a single levitated particle in a controllable environment is designed and tested. This enables fluidized bed processing to be simulated experimentally on a single-particle level. The device consists of a coating chamber, which contains a capillary tube for levitating the particle, a micro-dispenser for producing discrete drops of controlled size and velocity and a device for supplying gas with specified temperature and humidity. The coating chamber consists of two parts, a confined space where the particle is levitated and a droplet insertion cone where the coating solution is injected into the particle suspending gas flow. A capillary with a well-defined diameter connects the droplet insertion cone and the area where the particle is levitated. The device is equipped with a piezo-actuated flow-through micro-dispenser that has the ability to produce discrete droplets with high reproducibility in terms of droplet size and velocity. The gas required for the coating process is taken from a gas container where the water content is analysed and kept at a minimum. A liquid flow is then introduced into the gas flow at a well-defined flow rate, mixed and evaporated in a three-way mixing vault. The humidified gas flow is then split into two separate flows; a suspending gas flow and a protecting gas flow for the inside of the coating chamber. The device is equipped with a high-speed video camera for monitoring both droplet production and droplet impact. Temperatures and flow rates throughout the device are measured and logged. Preliminary results show the influence of solvent, gas quality and coating procedure on the quality of the coating.     

Neck postures in air traffic controllers with and without neck/shoulder disorders

Prolonged computer work with an extended neck is commonly believed to be associated with an increased risk of neck-shoulder disorders. The aim of this study was to compare neck postures during computer work between female cases with neck-shoulder disorders, and healthy referents. Based on physical examinations, 13 cases and 11 referents were selected among 70 female air traffic controllers with the same computer-based work tasks and identical workstations. Postures and movements were measured by inclinometers, placed on the forehead and upper back (C7/Th1) during authentic air traffic control. A recently developed method was applied to assess flexion/extension in the neck, calculated as the difference between head and upper back flexion/extension. Results: cases and referents did not differ significantly in neck posture (median neck flexion/extension: -10 degrees vs. -9 degrees ; p=0.9). Hence, the belief that neck extension posture is associated with neck-shoulder disorders in computer work is not supported by the present data.     

Second order shear lag theory

The standard shear lag theory for elastic aligned short-fibre composites is extended to allow for a gradient of overall strain. The result is a one-dimensional strain gradient theory of the Toupin–Mindlin type. All parameters are the same as in the standard theory, and in the limits of weak strain gradients, large fibre aspect ratios or low elastic modulus ratios, the standard theory is recovered. The gradient effect is illustrated by a simple one-dimensional boundary value problem: a vertical composite rod fixed at both ends and loaded by gravity. The fibre length significantly affects the solution when the fibres are rigid and their length is near the rod length; but otherwise the effect is weak.     

User perceptions of ICT impacts in Swedish construction companies: ‘it’s fine,just as it is’

The use of information and communication technologies (ICT) in construction companies has been growing steadily during the last decade. However, few studies inquire into either perceptions of the impact of actual ICT use or perceptions among different occupational groups in construction companies. The aim of the paper is to explore users’ general perceptions of ICT impacts in the post-adoption stage and analyse the implications for construction management practice. A mixed methods approach was used. Quantitative data were collected using a web-based survey both in a major construction company and among medium-sized companies in Sweden. Data from 294 returned completed questionnaires were analysed with t-tests and multiple regression analysis. In addition, participant observations and semi-structured interviews were conducted within the major construction company in order to strengthen the analysis. It can be concluded that respondents are generally fairly satisfied with the ICT. Differences in perceptions among occupational groups can be explained by the nature of work tasks and the original intentions for using ICT as a means of control and calculation. Even if respondents perceive that a further development of ICT could improve competitiveness, they do not want to increase their use of it in their workplaces. They basically think that ‘it is fine, just as it is’. This indicates that a challenge in construction management is to investigate how prevailing and new ICT applications can be used to develop the industry.     

Numerical Simulations of Lubricating Grease Flow in a Rectangular Channel with and without Restrictions

This article presents numerical simulations of the laminar flow of lubricating greases in a channel with rectangular cross section. Three greases with different consistencies (NLGI grades 00, 1, and 2) have been considered in three different configurations composed of a rectangular channel without restrictions, one rectangular step restriction, and one double-lip restriction. The driving pressure drop over the channel spans from 30 to 250 kPa. The grease rheology is described by the Herschel-Bulkley rheology model, and both the numerical code and rheology model have been validated with analytical solutions and flow measurements using micro-particle image velocimetry.     

A 21.5/43-GHz dual-frequency balanced Colpitts VCO in SiGe technology

A balanced Colpitts voltage-controlled oscillator (VCO) is designed and fabricated in a commercially available 0.25-/spl mu/m SiGe BiCMOS process. It has the characteristics of the push-push VCO, i.e., the VCO has simultaneously a differential output at a fundamental frequency of 21.5 GHz and a single-ended output at the second harmonic frequency of 43 GHz. A differential tuning technique is applied to reduce the phase noise. The measured phase noise at 1-MHz offset is -113 dBc/Hz at 21.5 GHz and -107 dBc/Hz at 43 GHz. The corresponding output power is about -6 and -17 dBm, respectively, with a 5% tuning range and a 130-mW dc power consumption.     

Miniaturized and automated sample pretreatment for determination of PCBs in environmental aqueous samples using an on-line microporous membrane liquid-liquid extraction-gas chromatography system

A new, fast, and automated sample pretreatment technique for determination of lipophilic organic compounds in aqueous samples has been developed and applied to the determination of polychlorinated biphenyls (PCBs) in environmental river water. It is based on miniaturized microporous membrane liquid-liquid extraction coupled on-line to gas chromatography (GC) with electron capture detection. The heart of the system that simultaneously connects the sample pretreatment step to the final GC analysis has been named the extracting syringe (ESy). The ESy carries a miniaturized membrane extraction card attached to an electrically and mechanically designed installment and is mounted directly over a GC injector for fully automated injection of the extract. A method was developed to extract 10 PCB congeners from 1-mL water samples (after addition of 40% acetonitrile) with an extraction time of 10 min. The optimized methodology showed good linearity (in the dynamic concentration range of 5 ng L(-)(1)-1 microg L(-)(1)), enrichment factors of 33-40 times, repeatable extractions (RSD 2-5%, n = 4), and low detection limits (2-3 ng L(-)(1)). Acetonitrile had to be added to the samples in order to overcome the influence of PCB adsorption on the repeatability of extraction and enrichment and to minimize the overall memory effect (OME). OME and carryover depended not only on the concentration of the organic solvent added to the sample and that used in the washing procedure but also on whether the extracting card was changed or not. When an optimized washing procedure was applied, the OME was approximately 0.2% at high concentrations (i.e., 1 microg L(-)(1)). When each extraction took place in a new extraction card, no OME was detected. Additionally, no significant adsorption onto glass surfaces or a matrix effect on extraction was noticed. The main features of this methodology are good extraction repeatability, low detection limits at short extraction time, and the unsurpassed characteristic of no detectable OME in the entire system when each sample is processed in a new card. The total consumption of organic (nonchlorinated) solvents is less than 5 mL per sample.