Densification and Properties of α-Silicon Carbide

Densification of a-Sic powders with no premixed sintering aids (type 1) and with premixed B and C (type 2) was investigated by sintering them at 2150° to 2200°C for 30 min. Flexure strengths, Weibull moduli, and fracture flaws were characterized for type 2 α-SiC only. The results were compared with those for a state-of-the-art sintered a-Sic material.     

A comparative study of short nylon fiber—Natural rubber composites prepared from dry rubber and latex masterbatch

A novel method for the preparation of short nylon fiber–natural rubber composites was developed in which short fibers chopped to approximately 6 mm were incorporated in the latex stage and processed into sheet form. By this method, mixing cycle time was reduced without compromising the fiber dispersion. Fiber breakage during mixing was reduced. The new composites when compounded with a dry bonding system based on hexamethylenetetramine, resorcinol and hydrated silica (HRH) showed improved modulus, tensile strength and abrasion resistance compared to conventional composites. Tear strength, resilience, and compression set were similar to the conventional composites. SEM analysis indicated better interaction between matrix and fibers in the case of latex master batch. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polyamide-6,6/in situ silica hybrid nanocomposites by sol-gel technique: synthesis, characterization and properties

The organic-inorganic hybrid nanocomposites comprising of poly(iminohexamethyleneiminoadipoyl), better known as Polyamide-6,6 (abbreviated henceforth as PA66), and silica (SiO₂) were synthesized through sol-gel technique at ambient temperature. The inorganic phase was generated in situ by hydrolysis-condensation of tetraethoxysilane (TEOS) in different concentrations, under acid catalysis, in presence of the organic phase, PA66, dissolved in formic acid. Infrared (IR) spectroscopy was used to monitor the microstructural evolution of the silica phase in the PA66 matrix. Wide angle X-ray scattering (WAXS) studies showed that the crystallinity in PA66 phase decreased with increasing silica content. Atomic force microscopy (AFM) of the nanocomposite films revealed the dispersion of SiO₂ particle with dimensions of <100 nm in the form of network as well as linear structure. X-ray silicon mapping further confirmed the homogeneous dispersion of the silica phase in the bulk of the organic phase. The melting peak temperatures slightly decreased compared to neat PA66, while an improvement in thermal stability by about 20 °C was achieved with hybrid nanocomposite films, as indicated by thermogravimetric analysis (TGA). Dynamic mechanical analysis (DMA) exhibited significant improvement in storage modulus (E′) for the hybrid nanocomposites over the control specimen. An increase in Young's modulus and tensile strength of the hybrid films was also observed with an increase in silica content, indicating significant reinforcement of the matrix in the presence of nanoparticles. Some properties of the in situ prepared PA66-silica nanocomposites were compared with those of conventional composites prepared using precipitated silica as the filler by solution casting from formic acid.     

Moisture absorption by cyanate ester modified epoxy resin matrices. Part I. Effect of spiking parameters

The moisture absorption of cyanate ester modified epoxy resin matrices has been studied under thermal spiking conditions. Enhanced moisture absorption has been observed at spike-temperatures above 120 °C. The results of the desorption studies on both control specimens and the spiked specimens showed that some of the water molecules remained entrained in the polymer. It is postulated that this water could be associated with that which is hydrogen bonded or from the hydrolysis of isolated residual cyanate ester groups because the concentration of entrained water remains constant at spike-temperatures below 180 °C. Above 180 °C a thermally activated process, leading to chain scission as indicated by a reduced recoverability of the glass transition temperature (T_g) on drying.On isothermal resorption, the moisture concentration was found to be similar to that achieved through thermal spiking, showing that the entrained water at the lower spike-temperatures can also be achieved under mild conditions. The T_g is reversibly recovered to within 5 °C, which indicates a degree of relaxation rather than degradation. The moisture diffusion coefficient estimated from the resorption curves is lower than those estimated from the absorption and desorption curves. The isothermal resorption diffusion coefficient also decreased with increasing spike temperature. It is proposed that thermal spiking induced a relaxation of the network but as the spike-temperature approaches the transition region of the wet polymer, further hydrolytically induced relaxation events become feasible.     

Low intensity visual data improvement using DWT and LWT based regularizer

Image Completion plays a vital role in compressed sensing, machine learning, and computer vision applications. The Rank Minimization algorithms are used to perform the image completion. The major problem with rank minimization algorithms is the loss of information in the recovered image at high corruption ratios. To overcome this problem Lifting wavelet transform based Rank Minimization (LwRM), and Discrete wavelet transform based Rank Minimization (DwRM) methods are proposed, which can recover the image, if the corrupted observations are more than 80%. The evaluation of the proposed methods are accomplished by Full Reference Image Quality Assessment (FRIQA) and No Reference Image Quality Assessment (NR-IQA) metrics. The simulation results of proposed methods are superior to state-of-the-art methods.

     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.     

Approximate probabilistic optimization using exact-capacity-approximate-response-distribution (ECARD)

Probabilistic structural design deals with uncertainties in response (e.g. stresses) and capacity (e.g. failure stresses). The calculation of the structural response is typically expensive (e.g., finite element simulations), while the capacity is usually available from tests. Furthermore, the random variables that influence response and capacity are often disjoint. In previous work we have shown that this disjoint property can be used to reduce the cost of obtaining the probability of failure via Monte Carlo simulations. In this paper we propose to use this property for an approximate probabilistic optimization based on exact capacity and approximate response distributions (ECARD). In Approximate Probabilistic Optimization Using ECARD, the change in response distribution is approximated as the structure is re-designed while the capacity distribution is kept exact, thus significantly reducing the number of expensive response simulations. ECARD may be viewed as an extension of SORA (Sequential Optimization and Reliability Assessment), which proceeds with deterministic optimization iterations. In contrast, ECARD has probabilistic optimization iterations, but in each iteration, the response distribution is approximated so as not to require additional response calculations. The use of inexpensive probabilistic optimization allows easy incorporation of system reliability constraints and optimal allocation of risk between failure modes. The method is demonstrated using a beam problem and a ten-bar truss problem. The former allocates risk between two different failure modes, while the latter allocates risk between members. It is shown that ECARD provides most of the improvement from risk re-allocation that can be obtained from full probabilistic optimization.     

A Comparative Investigation of Optical and Structural Properties of Cu-Doped CdO-Derived Nanostructures

In this report, we studied various structural and optical properties of pure and copper-doped cadmium oxide (CdO) thin films. Nanostructured Cu-doped CdO films were deposited using sol–gel spin-coating technique. The structural and morphological changes have been observed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM) studies. The optical and electrical properties of the pure and Cu-doped CdO thin films were studied by UV–vis spectroscopy and four-point probe method, respectively. The XRD peaks show the formation of nanocrystalline CdO with cubic face-centered crystal structure. The band gaps of the as deposited films were found in the range of 2.32–2.73 eV, while after doping, it decreases due to structural deformation. The electrical resitivity was found to decrease approximately ～10 in Cu-doped CdO thin films.