The use of damage-sensitive features to evaluate structural condition or health is a very critical aspect of structural health monitoring. The purpose of this paper is to investigate the potential of two different damage-sensitive features for detecting damage. Different damage scenarios are simulated on a large-scale laboratory structure and a three-span highway bridge for demonstration. The features presented in this paper are the modal flexibility-based deflection and curvature both of which are obtained directly from dynamic properties. In the literature, flexibility associated with mode shapes and mode shapes curvatures have been mostly explored. In this study, multi-input–multi-output dynamic data are used to obtain modal flexibility, which is a close approximation to the actual flexibility. A main novelty is that the curvature is calculated from the deflected shapes using the modal flexibility as opposed to using modal vectors. In this paper, the theory of the methodology is explained and then experimental studies and results are presented. For the experimental studies, the laboratory specimen and the three-span bridge were gradually damaged. It is shown that both deflection and curvature are conceptual and physically meaningful features for damage detection and localization. The issues and the requirements for these features to perform successfully are also presented. 相似文献
Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO2 for NO reduction by NH3 was examined in a fixed-bed flow reactor. The deactivation of the catalyst was strongly dependent on reaction temperature. At high reaction temperatures over 300°C, the catalyst did not lose its initial activity up to 50 h of operation, regardless of SO2 feed concentration from 500 to 20,000 ppm. However, at low reaction temperatures near 250°C, apparent deactivation did occur. Changes in the physicochemical properties such as surface area and sulfur content of deactivated catalyst well correlated with catalyst activity, depending upon reaction temperatures. The deactivation was due to pore blocking and/or filling by deactivating agents, which plugged and/or filled the pores of catalyst. The deactivating agents deposited on the catalyst surface were presumed to be (NH4)2SO4 and/or (NH4)HSO4 from the results of TGA and ion-chromatography measurement. 相似文献
Highly crosslinked ultrahigh molecular weight polyethylene (UHMWPE) stabilized by vitamin E (VE) is widely applied in artificial joints as the bearings. Despite the approval, there is a discord that VE lowers the crosslinking efficiency, limiting its use at high concentration. In this work, we aim to obtain highly crosslinked and oxidation resistant UHMWPE through the conjunction of tea polyphenol and chemical crosslinking. We hypothesized that highly incorporated tea polyphenol with multiple reactive sites can ameliorate crosslinking efficiency of chemical crosslinked UHMWPE in comparison to VE. Epigallocatechin gallate (EGCG) as representative tea polyphenol was incorporated into UHMWPE at high concentration (2–8 wt%), followed by chemical crosslinking with 2 wt% organic peroxide. Unlike VE/UHMWPE blends as the control, chemical crosslinking achieved an increasing trend in crosslink density of EGCG/UHMWPE blends with increasing antioxidant concentration. High concentration of EGCG also enhanced the oxidation stability of UHMWPE. Intriguingly, EGCG endowed UHMWPE with an excellent antimicrobial property, which was inefficient in VE/UHMWPE. Cell viability was hardly affected by the high loaded antioxidant and peroxide. The chemically crosslinked UHMWPE blended with EGCG is proved to be a reasonable, cost effective and realistic alternative for use in artificial joints. 相似文献
A synthesis strategy for the preparation of trimetallic PtCoFe alloy nanoparticle superlattices is reported. Trimetallic PtCoFe alloy monolayer array of nanoparticle superlattices with a large density of high index facets and platinum‐rich surface are successfully prepared by coreduction of metal precursors in formamide solvent. The concentration of cetyl trimethyl ammonium bromide plays a vital role for the formation of a monolayer array of nanoparticle superlattices, while the size of nanoparticles is determined by NaI. The prepared monolayer array of nanoparticle superlattices is the superior catalyst for oxygen reduction reaction as well as for ethanol oxidation owing to their specific structural and compositional characteristics. 相似文献
Construction of macro-materials with highly oriented microstructures and well-connected interfaces between building blocks is significant for a variety of applications. However, it is still challenging to confine the desired structures. Thus, well-defined building blocks would be crucial to address this issue. Herein, we present a facile process based on 1.8 nm Pd nanoclusters (NCs) to achieve centimeter-size assemblages with aligned honeycomb structures, where the diameter of a single tubular moiety is ~4 μm. Layered and disordered porous assemblages were also obtained by modulating the temperature in this system. The reconciled interactions between the NCs were crucial to the assemblages. As a comparison, 14 nm Pd nanoparticles formed only aggregates. This work highlights the approach of confining the size of the building blocks in order to better control the assembly process and improve the stability of the structures.
We have used a low noise Scanning Hall Probe Microscope (SHPM) to study vortex structures in superconducting films. The microscope has high magnetic field (2.9×10–8T/Hz at 77K) and spatial resolution, 0.85m. Magnetic field profiles of single vortices in High Tc YBa2Cu3O7– thin films have been successfully measured and the microscopic penetration depth of the superconductor has been extracted as a function of temperature. Flux penetration into the superconductor has been imaged in real time (8s/frame). 相似文献
The rational control of the friction and wear (damage) of engineering, as opposed to model, surfaces under practical conditions
such as high contact pressures has long been a technological challenge with much fundamental interest. Lubricant fluids and
physisorbed surfactant monolayers (boundary lubricants) are effective friction modifiers but often fail at high loads. We
show that the chemisorption of a suitably designed single-chained phosphonate surfactant onto crystalline α-alumina surfaces
produces robust protective monolayers that significantly reduce the friction forces and wear even at high loads. The mechanisms
are explained, which point to some general principles that offer a basis for scale-up in many different engineering systems.
This revised version was published online in June 2006 with corrections to the Cover Date. 相似文献