Parametric study on smoothed particle hydrodynamics for accurate determination of drag coefficient for a circular cylinder

Simulations of two-dimensional (2D) flow past a circular cylinder with the smoothed particle hydrodynamics (SPH) method were conducted in order to accurately determine the drag coefficient. The fluid was modeled as a viscous liquid with weak compressibility. Boundary conditions, such as a no-slip solid wall, inflow and outflow, and periodic boundaries, were employed to resemble the physical problem. A sensitivity analysis, which has been rarely addressed in previous studies, was conducted on several SPH parameters. Hence, the effects of distinct parameters, such as the kernel choices and the domain dimensions, were investigated with the goal of obtaining highly accurate results. A range of Reynolds numbers (1–500) was simulated, and the results were compared with existing experimental data. It was observed that the domain dimensions and the resolution of SPH particles, in comparison to the obstacle size, affected the obtained drag coefficient significantly. Other parameters, such as the background pressure, influenced the transient condition, but did not influence the steady state at which the drag coefficient was determined.     

Controller synthesis with guaranteed closed-loop phase constraints

In this paper, we present an analysis and synthesis approach for guaranteeing that the phase of a single-input, single-output closed-loop transfer function is contained in the interval [−α,α] for a given α>0 at all frequencies. Specifically, we first derive a sufficient condition involving a frequency domain inequality for guaranteeing a given phase constraint. Next, we use the Kalman–Yakubovich–Popov theorem to derive an equivalent time domain condition. In the case where , we show that frequency and time domain sufficient conditions specialize to the positivity theorem. Furthermore, using linear matrix inequalities, we develop a controller synthesis approach for guaranteeing a phase constraint on the closed-loop transfer function. Finally, we extend this synthesis approach to address mixed gain and phase constraints on the closed-loop transfer function.     

PBSVM: Partitioning and biased support vector machine for vocal fold pathology assessment using labeled and unlabeled data sets

Most of the existing classification methods, used for voice pathology assessment, are built based on labeled pathological and normal voice signals. This paper studies the problem of building a classifier using labeled and unlabeled data. We propose a novel learning technique, called Partitioning and Biased Support Vector Machine Classification (PBSVM), which tries to utilize all the available data in two steps: (1) a new heuristically partition-based algorithm, which extracts high quality pathological and normal samples from an unlabeled set, and (2) a more principle approach based on biased formulation of support vector machine, which is fairly robust to mislabeling and unbalance data problem. Experiments with wavelet-based energy features extracted from sustained vowels show that the new recognition scheme is highly feasible and significantly outperform the baseline classical SVM classifier, especially in the situation where the labeled training data is small.     

He’s homotopy perturbation method: A strongly promising method for solving non-linear systems of the mixed Volterra–Fredholm integral equations

In this paper, He’s homotopy perturbation method is applied to solve non-linear systems of mixed Volterra–Fredholm integral equations. Two examples are presented to illustrate the ability of the method. Also comparisons are made between the Adomian decomposition method and the homotopy perturbation method. The results reveal that He’s homotopy perturbation method is very effective and simple and in these examples leads to the exact solutions.     

Research trends in gender differences in higher education and science: a co-word analysis

The aim of this study is to map and analyze the structure and evolution of the scientific literature on gender differences in higher education and science, focusing on factors related to differences between 1991 and 2012. Co-word analysis was applied to identify the main concepts addressed in this research field. Hierarchical cluster analysis was used to cluster the keywords and a strategic diagram was created to analyze trends. The data set comprised a corpus containing 652 articles and reviews published between 1991 and 2012, extracted from the Thomson Reuters Web of Science database. In order to see how the results changed over time, documents were grouped into three different periods: 1991–2001, 2002–2007, and 2008–2012. The results showed that the number of themes has increased significantly over the years and that gender differences in higher education and science have been considered by specific research disciplines, suggesting important research-field-specific variations. Overall, the study helps to identify the major research topics in this domain, as well as highlighting issues to be addressed or strengthened in further work.     

Experimental Investigation on the Removal of p-Toluic Acid from Aqueous Solution using Functionalized Polymeric Sorbent

Polystyrene-divinylbenzene copolymer (PsDVB) was covalently functionalized with monoethanolamine (MEA), diethanolamine (DEA), and triethanolamine (TEA) by a simple method. The functionalized sorbents were characterized in terms of functionality and morphology, and used for the removal of p-toluic acid (p-TA) from aqueous solution. It was found that DEA-PsDVB has higher adsorption capacity than MEA- and TEA-PsDVB due to more accessible nitro and hydroxyl groups on its surface. Further investigation on the adsorptive properties of DEA-PsDVB indicated that the maximum uptake of p-TA occurred at the optimum pH of 5.3. The kinetics data was successfully represented by the pseudo-first-order model, and the behavior of the adsorption isotherms followed the Freundlich model well. Thermodynamic studies showed that the adsorption of p-TA onto DEA-PsDVB was an endothermic and spontaneous process along with the positive change in entropy. The regeneration of DEA-PsDVB was performed with 0.1 M NaOH solution, and results showed that 99% of the initial capacity was conserved after eight successive adsorption/regeneration cycles.     

Two-parameter TSCSP method for solving complex symmetric system of linear equations

We introduce a two-parameter version of the two-step scale-splitting iteration method, called TTSCSP, for solving a broad class of complex symmetric system of linear equations. We present some conditions for the convergence of the method. An upper bound for the spectral radius of the method is presented and optimal parameters which minimize this bound are given. Inexact version of the TTSCSP iteration method (ITTSCSP) is also presented. Some numerical experiments are reported to verify the effectiveness of the TTSCSP iteration method and the numerical results are compared with those of the TSCSP, the SCSP and the PMHSS iteration methods. Numerical comparison of the ITTSCSP method with the inexact version of TSCSP, SCSP and PMHSS are presented. We also compare the numerical results of the BiCGSTAB method in conjunction with the TTSCSP and the ILU preconditioners.     

Plasticized poly(vinyl chloride) composites: Influence of different nanofillers as antimigration agents

In this study, plasticized poly(vinyl chloride) (PVC) composites with different nanofillers, including single‐walled carbon nanotubes (SWCNTs), organoclay, TiO₂, and ZnO nanoparticles, were prepared, and their effects on plasticizer migration were investigated. Scanning electron micrographs revealed the dispersion quality of the nanofillers in the polymer matrix. It had a significant influence on the performance of the nanofillers in the process of plasticizer migration. Migration and exudation tests showed that the nanofillers could efficiently hinder plasticizer migration. On the basis of these results, we concluded that carbon nanotubes were the best antimigration agent in the plasticized system. This was ascribed to the high aspect ratio of the SWCNTs and the good interactions between them and the plasticizer. Also, TiO₂ nanoparticles showed a better performance compared to the ZnO nanoparticles. This was due to the more homogeneous dispersion of the TiO₂ in the polymer matrix and the higher surface area of the particles. The differential scanning calorimetry thermograms were in good agreement with the migration tests. The lowest change in the glass‐transition temperature was observed for the composite filled with SWCNTs. This indicated that a lower amount of the plasticizer migrated from PVC. The thermogravimetric analysis curves showed that the incorporation of the nanofillers improved the thermal stability of the PVC. The results could be useful for determining the efficiency of plasticized PVC in applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42559.     

Immobilization of palladium on benzimidazole functionalized mesoporous silica nanoparticles: catalytic efficacy in Suzuki–Miyaura reaction and nitroarenes reduction

Journal of Porous Materials - Benzimidazole functionalized mesoporous silica nanoparticles immobilized Pd(0)/Pd(II) has been proposed as an efficient catalyst for the one-pot preparation of biaryls...     

Direct synthesis of bi-modal porous structure MCM-41 and its application in CO2 capturing through amine-grafting

A bi-modal porous structure MCM-41 (BPS-MCM-41) was synthesized and functionalized by 3-[2-(2-Aminoethylamino)ethylamino]propyltrimethoxysilane (TRI); also, its performance in amine grafting and CO₂ capturing was compared with that of pore-expanded MCM-41 [1]. To create larger pores beside the mesoporous structure of MCM-41, carbon black nanoparticles were used as the solid template. Characterizing the BPS-MCM-41 using the BET and BJH techniques resulted in the surface reduction of 29.3 percent and volume increase of 68.46 percent. The pore size distribution showed two peaks: a narrow peak at 2.24 nm diameter, which belonged to micelles, and a wide one at about 50 nm due to the presence of used nanoparticles. The functionalization confirmed that BPS-MCM-41 is capable of accommodating a large quantity of amine groups. The CO₂ adsorption measurement indicated that internal volume of the adsorbent was a critical factor affecting the adsorption capacity of the amine grafted adsorbents.