Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

Resistive superconducting transition of κ-type BEDT-TTF organic superconductors in a magnetic field

The superconducting transition of the organic compoundsκ-(BEDT-TTF)₂ X is studied by resistive measurement in a magnetic field up to 10 T applied normal to the conducting plane. For the salts withX=Cu[N(CN)₂]Br andX=CuCN[N(CN)₂] the transition shows fanshaped broadening caused by superconductivity fluctuation. For theX=Cu(NCS)₂ salt the resistivity shows a peak in the transition region in a magnetic field below 4 T.This phenomenon is suppressed in defect-reduced samples for intralayer conduction. We discuss this peak in relation to the thermal fluctuation on the Josephson junction structures in this salt.     

Carrying capacity and vulnerability of four Asian lakes: A comparative study

To present axes for evaluating the water resources, lake environment and water use in a lake and its watershed, a comparative study was done for four East Asian lakes; lake Kasumigaura (Japan), Lake Laguna (Philippines), Lake Songkhla (Thailand) and Lake Dianchi (China). Two axes were then determined from the relationship between: (1) water use and water supply rate, and (2) water use and water quality. To clarify the meanings ‘carrying capacity’ and ‘vulnerability’, the maximum population density in the lake basin and total nitrogen concentration in the lake water were calculated and discussed to decide the direction of environmentally sound management of the drainage basin.     

Properties of networks obtained by internal plasticization of epoxy resin with aromatic and aliphatic glycidyl compounds

In order to improve the fracture properties of p, p′-diaminodiphenylmethane-cured epoxy resin, various kinds of aromatic and aliphatic glycidyl compounds were investigated as a modifier at an amount of 30 wt %. Several compounds promoted the fracture toughness. In any glycidyl compounds, however, heat resistance was decreased by the modification. The dynamic mechanical properties of the modified epoxy resins were measured. The crosslinking density ρ was calculated from the theory of rubber elasticity, and the mechanical properties of the resins were discussed in regard to the crosslinking density. Tensile strength was scarcely affected by the crosslinking density. Elongation at break and Izod impact strength increased remarkably with decrease in crosslinking density. The fracture toughness K_Ic- increased with decrease in crosslinking density except at small ρ.     

Balanced corpus of contemporary written Japanese

The balanced corpus of contemporary written Japanese (BCCWJ) is Japan’s first 100 million words balanced corpus. It consists of three subcorpora (publication subcorpus, library subcorpus, and special-purpose subcorpus) and covers a wide range of text registers including books in general, magazines, newspapers, governmental white papers, best-selling books, an internet bulletin-board, a blog, school textbooks, minutes of the national diet, publicity newsletters of local governments, laws, and poetry verses. A random sampling technique is utilized whenever possible in order to maximize the representativeness of the corpus. The corpus is annotated in terms of dual POS analysis, document structure, and bibliographical information. The BCCWJ is currently accessible in three different ways including Chunagon a web-based interface to the dual POS analysis data. Lastly, results of some pilot evaluation of the corpus with respect to the textual diversity are reported. The analyses include POS distribution, word-class distribution, entropy of orthography, sentence length, and variation of the adjective predicate. High textual diversity is observed in all these analyses.     

Controlling hydrothermal reaction pathways to improve acetic acid production from carbohydrate biomass

A two-step hydrothermal process to improve the production of acetic acid was discussed. The first step was to accelerate the formation of 5-hydroxymethyl-2-furaldehyde (HMF), 2-furaldehyde (2-FA), and lactic acid (LA), and the second step was to further convert the furans (HMF, 2-FA) and LA produced in the first step to acetic acid by oxidation with newly supplied oxygen. The acetic acid obtained by the two-step process had not only a high yield but also better purity. The contribution of two pathways via furans and LA in the two-step process to convert carbohydrates into acetic acid was roughly estimated as 85-90%, and the ratio of the contributions of furans and LA to yield acetic acid was estimated as 2:1. The fact that WO of carbohydrates is not capable of producing a large amount of acetic acid, while the two-step process can enhance the acetic acid yield, can be explained because formic acid is a basic product of direct oxidation of carbohydrate, and acetic acid in WO of carbohydrates may come from the oxidation of dehydration products of aldose.     

Effects of dietary saturated andtrans fatty acids on cholesteryl ester synthesis and hydrolysis in the testes of rats

Studies were made of the enzymic synthesis and hydrolysis of cholesteryl esters in rat testes. Weanling rats were fed for 14 weeks diets containing 5% by wt of hydrogenated coconut oil (HCO), a concentrate of ethyl elaidate and linolelaidate (TRANS), devoid of essential fatty acids (EFA), or safflower oil (SAFF). Cholesterol esterifying activity was localized in the soluble fraction, and cholesteryl ester hydrolase activity was distributed in both particulate and soluble fractions obtained from tissue homogenates. The optimum pH was 6.0 for esterification and 6.9–7.0 for hydrolysis. Neither esterifying nor hydrolytic activity was affected by freezing and thawing, but both reactions were inhibited by heat or sonication. The animals of both the HCO and TRANS groups had developed an EFA deficiency before they were sacrificed. The EFA deficiency produced upon feeding the HCO diet had no apparent effect on the synthesis and hydrolysis of cholesteryl esters in rat testes. The TRANS diet influenced the development of the testes as judged by their size, and cholesterol esterifying and cholesteryl ester hydrolyzing activities were suppressed in the testes of the animals of this group. A major difference in the effects of the HCO and TRANS diets on the lipids of the testes was the relatively minor amount of eicosatrienoic acid (20∶3) and the elevated level of docosapentaenoic acid (22∶5) in the cholesteryl esters of the testicular lipids of the TRANS group.     

Vapor phase hydroformylation of ethene over Co/SiO2 promoted by noble metals: dynamic in situ diffuse reflectance FT-IR study of surface species

An in situ diffuse reflectance FT-IR technique was employed to investigate the active surface species and the reaction mechanism of the oxygenate formation in the vapor phase hydroformylation of ethene on Co/SiO₂ promoted with various noble metals such as Ir, Rh, Pt, Re, Ru, and Pd. Co(A)/SiO₂ and Ir(CO)/SiO₂ which were derived from cobalt(II) acetate and Ir₄(CO)₁₂, respectively, were quite inactive in the reaction, and showed only quite small peaks of adsorbed CO under the conditions of 1.1 MPa of C₂H₄/CO/H₂ at 298 K. In contrast, Co(A)-Ir(CO)/SiO₂, which were very active in the reaction, exhibited strong absorption bands of linear and bridged CO species. At 423–463 K, propanal adsorbed on the catalyst and acyl species which is suggested as the intermediate for the formation of propanal were also observed on this catalyst. By exposing CO preadsorbed on this catalyst to C₂H₄/H₂ at 289 K and 0.1 MPa, the intensity of the linear CO band decreased, and the bands of propanal and acyl species emerged simultaneously, whereas that of the bridged CO band remained constant after the initial drop. These results suggested that the oxygenates are formed via the CO insertion into adsorbed ethyl species, and linear CO species plays a major role in the CO insertion on these noble metal-promoted cobalt catalysts.     

Cellular Antisense Activity of PNA–Oligo(bicycloguanidinium) Conjugates Forming Self‐Assembled Nanoaggregates

A series of peptide nucleic acid–oligo(bicycloguanidinium) (PNA–BG_n) conjugates were synthesized and characterized in terms of cellular antisense activity by using the pLuc750HeLa cell splice correction assay. PNA–BG₄ conjugates exhibited low micromolar antisense activity, and their cellular activity required the presence of a hydrophobic silyl terminal protecting group on the oligo(BG) ligand and a minimum of four guanidinium units. Surprisingly, a nonlinear dose–response with an activity threshold around 3–4 μM , indicative of large cooperativity, was observed. Supported by light scattering and electron microscopy analyses, we propose that the activity, and thus cellular delivery, of these lipo‐PNA–BG₄ conjugates is dependent on self‐assembled nanoaggregates. Finally, cellular activity was enhanced by the presence of serum. Therefore we conclude that the lipo‐BG‐PNA conjugates exhibit an unexpected mechanism for cell delivery and are of interest for further in vivo studies.     

Thermal behaviors and flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives

The thermal behaviors and the flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives were studied. The combustion was measured by the Underwriter laboratory (UL) test and cone calorimeter test and thermogravimetric analysis and program‐mass spectroscopy were applied to analyze the thermal behaviors. The blend with halogen additives showed the best result in the UL test. However, the blend with red‐phosphorous was the best in the cone calorimeter test. As the styrene sequence in the copolymer tended to degradate at a lower temperature, the major scission products spouted out from the polymer surface originated from polystyrene. The shorter the ignition times of the blends with red‐phosphorous were, the lower the peak heat release rates were. It was an interesting phenomenon because it suggested that the chemical structure of the residue changed to more stable polymers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 156–161, 2007