Reinjection experiment at the matsukawa vapor-dominated geothermal field: Increase in steam production and secondary heat recovery from the reservoir

A reinjection experiment has been conducted in an attempt to sustain reservoir pressure and steam production and to extract remaining heat energy in the superheated reservoir in the Matsukawa vapor-dominated geothermal field. This experiment was undertaken because the increase in superheat of produced steam and the decline of steam production are the current major issues for stable operation of the power plant. Almost all the reinjected fluid into well MR 1 was recovered from well M5, and the steam production of well M5 has increased by approximately 67%.     

Perfect Bayesian vs. Imperfect Bayesian in Small Decision Making Problems

This is an experimental economics research on human behaviour in “small decision making”. I set up ambiguity treatments in which there are two states of nature: a favourable state and an unfavourable state, but only one of them obtains on any given trial. The decision makers’ basic task is a binary choice between a risky option with higher expected value and a riskless option with lower expected value. The one-person game is iterated hundreds of times. Experimental results are reported with several findings, such as underweighting of rare events and deviations from expected value maximisation. Finally, I investigate the imperfect Bayesian decision makers observed in the experiments by exploring to what extent they can update prior probabilities and reflect it in making decisions.

     

Characteristics of a continuous Si-Ti-C-O fibre with low oxygen content using an organometallic polymer precursor

A continuous Si-Ti-C-O fibre with 12 wt% oxygen content, which is lower than the usual 18 wt% found in the normal fibres, was synthesized by using polytitanocarbosilane which has fewer Si-Si bonds than the usual precursor polymer. The density, tensile strength, tensile modulus and thermal conductivity were found to be 2.37 g cm^–3, 3.4±0.3 GPa, 190±10 GPa and 1.40 W m^–1 K^–1, respectively. Amongst these properties, the tensile modulus was improved by 20 GPa and the thermal conductivity had a higher value in comparison with that of the ordinary Si-Ti-C-O fibre with 18 wt% oxygen content. The Si-Ti-C-O fibre with a 12 wt% oxygen content has a better heat resistance above 1400 °C in an argon atmosphere and 1300 °C in air, than the usual fibre. About 60 and 40% of its tensile strength at room temperature were retained in air at respectively, 1500 and 1600 °C. This improved ceramic fibre is considered to be useful as a reinforcing material for advanced composites such as high-temperature ceramic matrix composites and metal matrix composites.     

水管用环氧树脂涂料的研制

新研制的环氧树脂水管内表面涂层不含焦油成分,对水质卫生毫无影响,而且,耐蚀性能、机械性能均优于原来使用的焦油沥青环氧树脂涂料。用此新涂料完全可以取代焦油环氧树脂涂料。     

Molecular breeding of cellulolytic microbes, plants, and animals for biomass utilization

Cellulosic materials are the major components of fibrous biomass produced as a result of photosynthesis and are considered as a reservoir of solar energy and organic materials. In order to cope with the problems of food and energy shortages expected in the near future, biotechnologists are encouraged to develop new technologies for the more effective utilization of the world's sustainable resources, i.e., biomass. One way is to engineer microorganisms and animals with the capability of digesting and utilizing cellulosic materials, and plants which can be easily degraded by cellulolytic enzymes. In this article, we summarize recent studies on the molecular breeding of cellulolytic organisms for biomass utilization along with some considerations regarding cellulolytic enzymes.     

Modeling technological learning and its application for clean coal technologies in Japan

Estimating technological progress of emerging technologies such as renewables and clean coal technologies becomes important for designing low carbon energy systems in future and drawing effective energy policies. Learning curve is an analytical approach for describing the decline rate of cost and production caused by technological progress as well as learning. In the study, a bottom-up energy-economic model including an endogenous technological learning function has been designed. The model deals with technological learning in energy conversion technologies and its spillover effect. It is applied as a feasibility study of clean coal technologies such as IGCC (Integrated Coal Gasification Combined Cycle) and IGFC (Integrated Coal Gasification Fuel Cell System) in Japan. As the results of analysis, it is found that technological progress by learning has a positive impact on the penetration of clean coal technologies in the electricity market, and the learning model has a potential for assessing upcoming technologies in future.     

A novel ferromagnetic thermo-stent for plaque stabilization that self-regulates the temperature

The purpose of this study is to investigate the vascular wall with a thermally self-regulating, cylindrical stent made of a low Curie temperature ferromagnetic alloy. Physiologic saline was circulated in the silicone model vessel implanted with the stent. The stent-temperature remained nearly constant for variable saline flows, saline temperatures, and magnetic flux densities. Stent implants of this type in human blood vessels could potentially enable thermotherapy and temperature determination without catheterization.     

An investigation of the pH-activity relationships of Cex, a family 10 xylanase from Cellulomonas fimi: xylan inhibition and the influence of nitro-substituted aryl-beta-D-xylobiosides on xylanase activity

The kinetic parameters of Cex, a family 10 xylanase from Cellulomonas fimi, were determined at various pH levels using soluble birchwood xylan (BWX) as a natural polymeric substrate along with three other synthetic aryl-beta-D-xylobioside substrates. Using BWX, a high level of substrate inhibition was observed which increased with decreasing pH. In contrast, typical Michaelis-Menten-type profiles were obtained using the three aryl-beta-D-xylobiosides as substrates. The k(cat) values determined using o-nitrophenyl-beta-D-xylobioside did not change as the pH increased, whereas the k(cat) values obtained with BWX, phenyl-beta-D-xylobioside and p-nitrophenyl-beta-D-xylobioside decreased, suggesting that the presence of an ortho nitro group affects the activity displayed by Cex. These differences were not observed with XynB from Clostridium stercorarium F9, a member of the same family of xylanases as Cex. These results indicate that a careful evaluation is required when employing substituted aryl-beta-D-xylobiosides in the characterization of xylanases.     

Purification and some properties of a chitinase from Xanthomonas sp. strain AK

Chitinase B (ChiB) was purified from the culture supernatant of Xanthomonas sp. strain AK by Phenyl-Toyopearl 650M and DEAE-Toyopearl 650M column chromatographies. The purified enzyme preparation gave a single band on SDS-polyacrylamide gel electrophoresis and the molecular weight of ChiB was estimated to be 48,000. The enzyme was optimally active at pH 6.0 and 60 degrees C. N-Terminal amino acid sequence analysis suggested that ChiB is a member of glycosyl hydrolase family 18 and that it is genetically different from ChiA recently reported (Sakka et al., J. Ferment. Bioeng., 86, 527-533, 1998). Immunological analysis suggested that ChiB was the major chitinase species in the culture supernatant of Xanthomonas sp. strain AK and that production of the enzyme was induced by the presence of chitin.     

Relationship between Expression of Onco-Related miRNAs and the Endoscopic Appearance of Colorectal Tumors

Accumulating data indicates that certain microRNAs (miRNAs or miRs) are differently expressed in samples of tumors and paired non-tumorous samples taken from the same patients with colorectal tumors. We examined the expression of onco-related miRNAs in 131 sporadic exophytic adenomas or early cancers and in 52 sporadic flat elevated adenomas or early cancers to clarify the relationship between the expression of the miRNAs and the endoscopic morphological appearance of the colorectal tumors. The expression levels of miR-143, -145, and -34a were significantly reduced in most of the exophytic tumors compared with those in the flat elevated ones. In type 2 cancers, the miRNA expression profile was very similar to that of the exophytic tumors. The expression levels of miR-7 and -21 were significantly up-regulated in some flat elevated adenomas compared with those in exophytic adenomas. In contrast, in most of the miR-143 and -145 down-regulated cases of the adenoma-carcinoma sequence and in some of the de novo types of carcinoma, the up-regulation of oncogenic miR-7 and/or -21 contributed to the triggering mechanism leading to the carcinogenetic process. These findings indicated that the expression of onco-related miRNA was associated with the morphological appearance of colorectal tumors.