Interconnected power systems with superconducting magnetic energy storage

The objective of this work is to discuss the concept of back‐to‐back interconnection systems with energy storage, especially with a Superconducting Magnetic Energy Storage (SMES) incorporated into a back‐to‐back DC link. In this case, each converter of the back‐to‐back system is used as a power conditioning system for the SMES coils. Since the AC–DC converter can be designed independently of the frequency of the power system, a two‐way switch is connected to the AC side of each converter. This two‐way switch can select the interconnected power systems. By using the two‐way switches, this system can provide the stored energy in the SMES system to each interconnected power system through two AC–DC converters. For instance, lower‐cost power of each power network can be stored through two converters during the off‐peak hours and made available for dispatch to each power network during periods of demand peak. Then this system increases the reliability of electric power networks and enables the economical operations depending on the power demand. This paper describes the unique operations of the back‐to‐back interconnection with SMES and discuses the optimal SMES configuration for a 300‐MW‐class back‐to‐back interconnection. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(2): 37–43, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20482     

Expression of Human DNAJ (Heat Shock Protein-40) B3 in Humanized UDP-glucuronosyltransferase 1 Mice

The human DNAJB3 gene encodes a DNAJ (Heat shock protein 40; Hsp40) homolog, subfamily B, member 3 chaperone protein (DNAJB3), which can be down-regulated in disease conditions, as observed in decreased expression of DNAJB3 mRNA in peripheral blood mononuclear cells (PBMC) of obese patients. Recently, humanized UDP-glucuronosyltransferase (UGT) 1 mice (hUGT1 mice) were developed, in which the introduced human UGT1 gene contained a gene encoding human DNAJB3. In the present study, we analyzed the expression of human DNAJB3 mRNA in hUGT1 mice. Among the examined tissues, the testis had the highest expression of human DNAJB3 mRNA, while the lowest expression was observed in the liver. We found that the pattern of tissue-specific expression of mouse Dnajb3 in hUGT1 mice was very similar to that of human DNAJB3. We further demonstrated that the expression of human DNAJB3 in the liver was significantly reduced in high-fat-diet-fed hUGT1 mice compared to the expression level in the control mice, indicating that the expression of human DNAJB3 in hUGT1 mice could be similarly regulated in disease conditions such as obesity. Humanized UGT1 mice might therefore be useful to investigate the physiological role of human DNAJB3 in vivo.     

Fabrication of bilayered YSZ/SDC electrolyte film by electrophoretic deposition for reduced-temperature operating anode-supported SOFC

Bilayered Y₂O₃-stabilized ZrO₂ (YSZ)/Sm₂O₃-doped CeO₂ (SDC) electrolyte films were successfully fabricated on porous NiO–YSZ composite substrates by electrophoretic deposition (EPD) based on electrophoretic filtration followed by co-firing with the substrates. In EPD, positively charged YSZ and SDC powders were deposited directly on the substrates, layer by layer from ethanol-based suspensions. Delamination between YSZ and SDC films was avoided by reducing the SDC films’ thickness to ca. 1 μm. A single cell was constructed on the bilayered electrolyte films composed of ca. 4 μm-thick YSZ and ca. 1 μm-thick SDC films. As a cathode in the cell, La_0.6Sr_0.4Co_0.2Fe_0.8O_3−x (LSCF) was used. Maximum output power densities greater than 0.6 W cm⁻² were obtained at 700 °C for the bilayered YSZ/SDC electrolyte cells thus constructed.     

Molecular dynamics simulation of 〈<Emphasis Type="Bold">c</Emphasis>+<Emphasis Type="Bold">a</Emphasis>〉 dislocation core structure in hexagonal-close-packed metals

The core structures of 〈c+a〉 dislocations in hexagonal-close-packed (hcp) metals have been investigated by molecular dynamics (MD) simulation using a Lennard-Jones-type pair potential. The 〈c + a〉 edge dislocation has two types of core at 0 K; one is a perfect dislocation (type A), and the other has two 1/2 〈c+a〉 partials (type B). Type A transforms to type B by abruptly increasing temperature from 0 K to 293 K, while type B is stable in temperature range from 0 K to 293 K. In contrast, type A extends parallel to (0001) at 30 K, and this extended core is still stable at 293 K. These results suggest that the 〈c+a〉 edge dislocation glides on the {11 2} as two 1/2 〈c+a〉 partial dislocations and becomes sessile due to changes of the core structure. The 〈c+a〉 screw dislocation spreads over two {10 1} planes at 0 K. The core transforms into a unsymmetrical structure at 293 K, which is spread over {11 2} and {10 1}, and core spreading occurs parallel to {11 2} at 1000 K. A critical strain to move screw dislocations depends on the sense of shear strain. The dependence of the yield stress on the shear direction can be explained in terms of these core structures. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Experimental verification of a dynamic voltage restorer capable of significantly reducing energy‐storage element requirements

This paper deals with a dynamic voltage restorer (DVR) characterized by installing the shunt converter at the load side. The DVR can compensate for the load voltage when a voltage sag appears in the supply voltage. An existing DVR requires a large capacitor bank or other energy‐storage elements such as double‐layer capacitors or batteries. The DVR presented in this paper requires only a small DC capacitor intended for smoothing the DC‐link voltage. Moreover, three control methods for the series converter are compared and discussed to reduce the series‐converter rating, paying attention to the zero‐sequence voltages included in the supply voltage and the compensating voltage. Experimental results obtained from a 200‐V, 5‐kW laboratory system are shown to verify the viability of the system configuration and the control methods. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(3): 73–82, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20460     

Mobile robot navigation by a Distributed Vision System

This paper proposes aDistributed Vision System (DVS), which is an intelligent infrastructure for mobile robots consisting of manyvision agents (VAs) embedded in an environment. The system monitors the environment from various viewing points with the VAs, maintains the dynamic environment models, and provides various information to robots. Based on this concept, we have developed a prototype of the DVS which consists of sixteen vision agents and simultaneously navigates two robots in a model town.     

Electrolyte properties of 1-alkyl-2,3,5-trimethylpyrazolium cation-based room-temperature ionic liquids for lithium secondary batteries

The physicochemical and electrochemical properties of three 1-alkyl-2,3,5-trimethylpyrazolium cation-based room-temperature ionic liquids with various alkyl chain lengths were investigated. The temperature dependences of density, viscosity, and ionic conductivity were obtained by precise measurements. Electrolyte properties of these room-temperature ionic liquids were also examined from the viewpoint of their uses in lithium secondary batteries ([LiCoO₂ positive electrode|electrolyte|lithium metal negative electrode]). It was found that the alkyl chain length affects the charge–discharge performances of cells.     

Effect of aluminium on the polymerization silicic acid in aqueous solution and the deposition of silica of silica

The effect of aluminium on the polymerization of silicic acid was studied at pH 7, 8 and 9 in the aluminium concentration range of 0–26 ppm (Al) by spectrophotometry, gel chromatography and ²⁷Al NMR. Retarding and accelerating effects of aluminium on the growth of polysilicic acid particles and on the reaction between monosilicic acid and polysilicic acid were observed by changing the pH. It is suggested that the accelerating effect on the reaction between polysilicic acid particles is due to the formation of aluminium hydroxide on the surface of polysilicic acid. The rate of decrease in the monosilicic acid concentration in the presence of aluminium was faster than that in the absence of aluminium at pH 9, because monosilicic acid could be adsorbed rapidly on the aluminium hydroxide. From the results it was presumed that the formation of aluminium hydroxide on the solid surface may accelerate the deposition of silicic acid from geothermal water.