Estimating phonation threshold pressure

Phonation threshold pressure (PTP) is the minimum subglottal pressure required to initiate vocal fold oscillation. Although potentially useful clinically, PTP is difficult to estimate noninvasively because of limitations to vocal motor control near the threshold of soft phonation. Previous investigators observed, for example, that trained subjects were unable to produce flat, consistent oral pressure peaks during/pae/syllable strings when they attempted to phonate as softly as possible (Verdolini-Marston, Titze, & Druker, 1990). The present study aimed to determine if nasal airflow or vowel context affected phonation threshold pressure as estimated from oral pressure (Smitheran & Hixon, 1981) in 5 untrained female speakers with normal velopharyngeal and voice function. Nasal airflow during /p/occlusion was observed for 3 of 5 participants when they attempted to phonate near threshold pressure. When the nose was occluded, nasal airflow was reduced or eliminated during /p/;however, individuals then evidenced compensatory changes in glottal adduction and/or respiratory effort that may be expected to alter PTP estimates. Results demonstrate the importance of monitoring nasal flow (or the flow zero point in undivided masks) when obtaining PTP measurements noninvasively. Results also highlight the need to pursue improved methods for noninvasive estimation of PTP.     

Biodegradation of monoaromatic hydrocarbons in aquifer columns amended with hydrogen peroxide and nitrate

The ability of indigenous microorganisms to degrade benzene, toluene, ethylbenzene and xylenes (BTEX) in laboratory scale flow-through aquifer columns was tested separately with hydrogen peroxide (110 mg/l) and nitrate (330 mg/l as NO₃⁻) amendments to air-saturated influent nutrient solution. The continuous removal of individual components from all columns relative to the sterile controls provided evidence for biodegradation. In the presence of hydrogen peroxide, the indigeneous microorganisms degraded benzene and toluene (> 95%), meta- plus para-xylene (80%) and ortho-xylene (70%). Nitrate addition resulted in 90% removal of toluene and 25% removal of ortho-xylene. However, benzene, ethylbenzene, meta- and para-xylene concentrations were not significantly reduced after 42 days of operation. Following this experiment, low dissolved oxygen (< 1 mg/l) conditions were initiated with the nitrate-amended column influent in order to mimic contaminated groundwater conditions distal from a nutrient injection well. Toluene continued to be effectively degraded (> 90%), and more than 25% of the benzene, 40% of the ethylbenzene, 50% of the meta- plus para-xylenes and 60% of the ortho-xylene were removed after several months of operation.     

Specification methods for material-handling control algorithms in flexible manufacturing systems

Good methods are needed to specify, test, and debug material-handling control logic. This article surveys a number of representative methods for defining and describing control algorithms for programmable material-handling equipment used in flexible manufacturing systems. The methods are evaluated with regard to their suitability for communication between people and as bases for interfaces to automatic program generators. It is concluded that no single method is entirely satisfactory. Three methods (position diagrams, function block diagrams, and operation networks) have potential to be combined into an effective hybrid approach that minimizes the need for the user to switch between various conceptual models.     

Single-Phase Permanent-Magnet Motor Analysis

A unified theoretical approach is presented for the calculation of the performance of the single-phase capacitor-start permanent-magnet (PM) ac line-start motor. The earlier work of Chang and of Finch and Lawrenson on capacitor reluctance motors is extended. As far as possible, a common set of reference frame transformations for steady-state, transient, and asynchronous performance is also provided, permitting the use of all the theory developed for the analysis of the balanced polyphase PM motor. A new approximate technique is given for estimating the average asynchronous torque/speed curve from computed acceleration curves.     

Model-driven systems development and integration environment

Telecommunications operators are undergoing massive transformations in order to metamorphose themselves into the ICT world and compete with agile, lean IT organisations. The main challenges facing telecommunications operators, such as BT, are to reduce costs and increase agility in deploying software systems for provisioning ICT services. Despite using reusable capabilities and COTS packages, the major source of increased cost lies in the heavy integration tax we incur for integrating diverse systems implemented on diverse platforms and middleware, with heterogeneous data and process models. This paper looks at cost implications of lengthy and often manual migration to-and-from systems and platforms, and shows the clear business benefits of model-driven development (MDD) as defined by the Object Management Group (OMG). It is clearly demonstrated that model-driven development has matured into a practical, industrialised, scalable and evolvable technology, culminating from decades of R&D on specification and design languages, executable formalisms and domainspecific languages and language transformations.     

Peripheral nerve stimulation in a whole-body echo-planar imaging system

Echo-planar techniques in MRI use a rapidly oscillating frequency-encoding gradient with the potential to produce peripheral nerve stimulation. To evaluate the incidence, type, and location of stimulation in a commercial whole-body scanner, we studied two groups: (a) 173 consecutive individuals scanned by echo-planar imaging for other purposes and (b) seven subjects who were scanned with an extensive set of 36 echo-planar sequences (with prompting after each scan to report any peripheral nerve stimulation) to test the effects of various parameters. Although only 5% of group A reported symptoms of peripheral nerve stimulation, all in group B experienced some type of stimulation, dependent primarily on direction of the oscillating gradient and location of the body within the gradient coil. Maximum stimulation typically occurred 30 to 40 cm from isocenter in the region of maximum dB/dt. Generally, y gradients produced truncal stimulation, and x gradients produced stimulation in the head. When hands were clasped over the abdomen, a tingling in the hands occasionally was felt. Patients should be instructed to keep their hands apart.     

Expression of functional MHC class II molecules by a mouse pro-B cell clone

OBJECTIVE: Pooled bronchoalveolar lavage fluid (BALF), the return of lavage, contains both bronchial and alveolar material which differ from each other. Artifacts may be created by filtering, centrifuging and washing cells before cytopreparation. This study presents reference values of healthy volunteers for the alveolar sample, ALF, cytopreparation being performed without filtration or centrifugation. METHODS: Eighteen healthy, non-smoking volunteers underwent a standard bronchoalveolar lavage using 10 aliquots of 20 ml of saline. Excluding the return of the first and second aliquots, the rest were pooled and examined cytologically, immunocytochemically and biochemically. The mean, standard deviation, and 95% confidence limits were calculated for the following variables: amount of return, estimated content of epithelial lining fluid (ELF), total and differential cell counts on filter and cytocentrifuge (CCF) preparations, computed cell counts per unit volume of ALF, distribution of lymphocyte subgroups CD3+CD2, CD4, CD8, CD19, CD25 and CD57, and the ratio of CD4 to CD8, the amounts of lymphocytes in the same subgroups per volume of ALF, and the concentrations of total protein, albumin, immunoglobulins A, G and M, hyaluronic acid, eosinophilic cationic protein (ECP), procollagen III aminoterminal propeptide (PCP) and beta 2-microglobulin in ALF and in ELF, as well as the ratios of the concentrations of the solutes in ALF to the same in serum. RESULTS: The 95% confidence limits of means for the most important variables were as follows: estimated ELF content 0.42-0.74%; total cells in ALF 76.6-143.0 x 10(6) l-1; distribution of inflammatory cells on filter and CCF slides: macrophages 74.9-83.6 and 81.4-90.1%, lymphocytes 13.1-22.5 and 8.1-16.4%, and neutrophils 1.0-4.1 and 0.7-2.7%, respectively; distribution of lymphocyte subsets: CD3+CD2 85.6-90.6%, CD4 44.3-53.1%, CD8 26.9-35.8%; concentration of solutes in ALF: total protein 44.8-61.3 mg l-1, albumin 15.4-22.2 mg l-1, IgA 1.8-3.4 mg l-1, IgG 3.1-6.1 mg l-1, IgM 0.05-0.26 mg l-1, hyaluronic acid 8.8-11.1 micrograms l-1, ECP 0.19-0.77 micrograms l-1, PCP 0.005-0.58 micrograms l-1, beta 2-microglobulin 62.2-81.5 micrograms l-1. CONCLUSIONS: Our results show that excluding the bronchial sample from ALF of volunteer subjects and omitting filtering and washing before cytopreparation produces cytologic, immunocytochemical and biochemical reference values with reasonable 95% confidence limits to be used in clinical settings.     

Perceiving exterior letters of words: Differential influences of letter-fragment and non-letter-fragment masks.

Previous research shows letter-fragment masks and non-letter-fragment fields have different effects on performance with briefly presented alphabetic targets. However, popular accounts of these differences ignore mask configuration. Over a series of experiments, configurational effects of letter-fragment (LF) and non-letter-fragment (NLF) masks were compared. When the configuration of LF masks matched word boundaries, performance with exterior letter pairs from words improved, whereas performance with illegal exterior-letter pairs and single letters was unaffected. When the same changes were made to NLF masks, only an overall drop in performance occurred, with no selective effect on target type. Although LF mask configuration selectively affected lexical processing, NLF mask configuration produced substantially different effects, indicating problems with contemporary accounts of masking differences that ignore influences of mask configuration. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Judgment: The Foundation of Professional Success.

Lists of core competencies or critical capabilities are popular and plentiful. This article makes the case that a single core competency or critical capability accounts for professional success: the exercise of judgment. Judgment is the critical determinant of the quality of professional decisions, actions, and evaluations. Practical models of judgment are presented. The elements and dynamics of judgment are detailed. Individual, group, and organization implications are explored. Coaching and consulting interventions are explained. (PsycINFO Database Record (c) 2010 APA, all rights reserved)