Temporal order and functional analysis of mutations within the Fli-1 and p53 genes during the erythroleukemias induced by F-MuLV

The erythroleukemias induced by Friend murine leukemia virus (F-MuLV) result from the accumulation of a number of genetic changes, including activation of the Fli-1 proto-oncogene and inactivation of the p53 tumor suppressor gene. We have determined the temporal order of mutation of the genes involved in this multistage malignancy, by serial in vivo transplantation of F-MuLV induced primary erythroleukemias into syngenic Balb/c mice. These primary tumors are capable of growing when transplanted into syngenic mice, but die after several days of in vitro culture. From the transplanted tumors grown in syngenic mice, erythropoietin-dependent cell lines were established in culture that are clonally related to cells in the primary tumors. We show that retroviral insertional activation of the Fli-1 ets family member is the first detectable genetic event in F-MuLV induced primary erythroleukemias. Mutations in the p53 gene were observed in the Epo-dependent cell lines but not in the transplanted erythroleukemias used to establish these cell lines in culture. These data suggest that activation of Fli-1 plays an important role in the early stages of F-MuLV-induced leukemia, perhaps by altering the self-renewal probabilities of erythroid progenitor cells and that p53 mutations immortalize these cells, enabling them to grow in vitro in the presence of Epo.     

GIBC formulation for the resonant frequencies and fielddistribution of a substrate-mounted dielectric resonator

Dielectric resonators (DR's) are widely used in telecommunication systems. A method is proposed here to find the resonant frequency and field distribution in a substrate-mounted DR structure. The field of a dielectric rod has been decomposed into a combination of guided modes with unknown coefficients and an unknown continuous spectrum of radiation field. The unknowns are then obtained by applying two generalized impedance boundary conditions (GIBC's) representing the substrate and air layers at the top and bottom of the DR. This leads to the calculation of the total (guided+radiation) field as well as the resonant frequency of the structure     

Gaming the Regulator: A Survey

Many regulators use benchmarking as part of the incentive-based regulation of natural monopolies so as to reduce the possibilities for gaming. However, the use of benchmarking can lead firms to pursue virtual rather than true performance improvements by gaming the regulator’s benchmarking in a number of ways that are contrary to the intentions of the scheme.     

Legendre multiwavelet functions for numerical solution of multi-term time-space convection–diffusion equations of fractional order

Engineering with Computers - In this study, the Ritz–Galerkin method based on Legendre multiwavelet functions is introduced to solve multi-term time-space convection–diffusion equations...     

Fuzzy logic controller and cascade inverter for direct torque control of IM

In this paper, a five-level cascaded H-bridge multilevel inverters topology is applied on induction motor control known as direct torque control (DTC) strategy. More inverter states can be generated by a five-level inverter which improves voltage selection capability. This paper also introduces two different control methods to select the appropriate output voltage vector for reducing the torque and flux error to zero. The first is based on the conventional DTC scheme using a pair of hysteresis comparators and look up table to select the output voltage vector for controlling the torque and flux. The second is based on a new fuzzy logic controller using Sugeno as the inference method to select the output voltage vector by replacing the hysteresis comparators and lookup table in the conventional DTC, to which the results show more reduction in torque ripple and feasibility of smooth stator current. By using Matlab/Simulink, it is verified that using five-level inverter in DTC drive can reduce the torque ripple in comparison with conventional DTC, and further torque ripple reduction is obtained by applying fuzzy logic controller. The simulation results have also verified that using a fuzzy controller instead of a hysteresis controller has resulted in reduction in the flux ripples significantly as well as reduces the total harmonic distortion of the stator current to below 4 %.     

X-ray Photoelectron Spectroscopy of Cadmium Tin Oxide Ceramics in As-Fired and Electrochemically Reduced Forms

X-ray photoelectron spectroscopy (XPS) has been employed to investigate the chemical nature of samples of dicadmium stannate (Cd₂SnO₄) in the as-fired, electrochemically reduced, and reoxidized states. The reduction of Cd₂SnO₄ was found to be associated with a dramatic color change from bright yellow to dark green, a phenomenon commonly known as the electrochromic effect. Both quantitative XPS results and binding energy measurements proved that, upon exposure of the reduced ceramic bodies to air, the Sn²⁺ to Sn⁴⁺ transition readily took place to produce the intermediate compound, Cd₂SnO₃ with divalent tin. Prolonged exposure to the atmosphere did not result in further progress of reoxidation extending to monovalent cadmium. However, complete reoxidation of the reduced samples was possible by annealing in air at 350°C for a short period of time, e.g., 3 h, by which the original features of the as-fired state such as color and electrical conductivity were restored. The results also showed that reoxidized samples at high temperature assume the same XPS characteristics as those of as-fired ceramics.     

Design and fabrication of 3D‐plotted polymeric scaffolds in functional tissue engineering

Regenerating the load‐bearing tissues requires 3D scaffolds that balance the temporary mechanical function with the biological requirements. In functional tissue engineering, designing scaffolds with biomimetic mechanical properties could promote tissue ingrowth since the cells are sensitive to their local mechanical environment. This work aims to design scaffolds that mimic the mechanical response of the biological tissues under physiological loading conditions. Poly(L ‐lactide) (PLLA) scaffolds with varying porosities and pore sizes were made by the 3D‐plotting technique. The scaffolds were tested under unconfined ramp compression to compare their stress profile under load with that of bovine cartilage. A comparison between the material parameters estimated for the scaffolds and for the bovine cartilage based on the biphasic theory enabled the definition of an optimum window for the porosity and pore size of these constructs. Moreover, the finite element prediction for the stress distribution inside the scaffolds, surrounded by the host cartilaginous tissue, demonstrated a negligible perturbation of the stress field at the site of implantation. The finite element modeling tools in combination with the developed methodology for optimal porosity/pore size determination can be used to improve the design of biomimetic scaffolds. POLYM. ENG. SCI., 47:608–618, 2007. © 2007 Society of Plastics Engineers.     

A flowchart‐based intelligent tutoring system for improving problem‐solving skills of novice programmers

Intelligent tutoring and personalization are considered as the two most important factors in the research of learning systems and environments. An effective tool that can be used to improve problem‐solving ability is an Intelligent Tutoring System which is capable of mimicking a human tutor's actions in implementing a one‐to‐one personalized and adaptive teaching. In this paper, a novel Flowchart‐based Intelligent Tutoring System (FITS) is proposed benefiting from Bayesian networks for the process of decision making so as to aid students in problem‐solving activities and learning computer programming. FITS not only takes full advantage of Bayesian networks, but also benefits from a multi‐agent system using an automatic text‐to‐flowchart conversion approach for engaging novice programmers in flowchart development with the aim of improving their problem‐solving skills. In the end, in order to investigate the efficacy of FITS in problem‐solving ability acquisition, a quasi‐experimental design was adopted by this research. According to the results, students in the FITS group experienced better improvement in their problem‐solving abilities than those in the control group. Moreover, with regard to the improvement of a user's problem‐solving ability, FITS has shown to be considerably effective for students with different levels of prior knowledge, especially for those with a lower level of prior knowledge.     

MC-MLAS: Multi-channel Minimum Latency Aggregation Scheduling in Wireless Sensor Networks

Data aggregation is a key, yet time-consuming functionality in wireless sensor networks (WSNs). Multi-channel design is a promising technique to alleviate interference as a primary reason for long latency of TDMA aggregation scheduling. Indeed, it provides more potential of parallel transmissions over different frequency channels, thus minimizing time latency. In this paper, we focus on designing a multi-channel minimum latency aggregation scheduling protocol, named MC-MLAS, using a new joint approach for tree construction, channel assignment, and transmission scheduling. To our best knowledge, this is the first work in the literature which combines orthogonal channels and partially overlapping channels to consider the total latency involved in data aggregation. Extensive simulations verify the superiority of MC-MLAS in WSNs.     

Experimental and theoretical study of semiconductor laser dynamics due to filtered optical feedback

We report experimental results on the nonlinear dynamical response of a semiconductor laser subjected to time-delayed (>5 ns), frequency selective, optical feedback from a Fabry-Pe/spl acute/rot interferometer type of filter. Three regimes of interest, based on the relative value of the filter bandwidth with respect to the relevant laser parameters (relaxation oscillation frequency and external cavity mode spacing), are identified, viz. a wide filter case, an intermediate filter width case, and a narrow filter case. The dynamical response of the laser is shown to be quite different in each of these regimes. The principal results are 1) the laser's linewidth enhancement factor, coupled with the nonlinear response of the filter, can be exploited to induce nonlinear dynamics in the instantaneous optical frequency of the laser light on a time scale related to the time-delay of the feedback, 2) a mode mismatch effect which arises from a detuning between the filter center frequency and the nearest external cavity mode and manifests itself in a reduction of the maximum light available for feedback, and 3) a reduction in, or even disappearance of, relaxation oscillations in the laser dynamics when a filter of appropriate width is chosen. More generally, it is observed that certain dynamics that occur due to unfiltered optical feedback may be suppressed when the feedback light is spectrally filtered.