Gelation mechanism of agarose and κ-carrageenan solutions estimated in terms of concentration fluctuation

The gelation mechanism of agarose and κ-carrageenan aqueous solutions was investigated by using polarized light scattering and X-ray diffraction techniques in terms of the liquid-liquid phase separation. When an incident beam of He-Ne gas laser was directed to the gel prepared by quenching the agarose solution, the logarithm of scattered intensity increased linearly in the initial stage and tended to deviate from this linear relationship in the latter stage. If the linear increase in the initial stage could be analyzed within the framework of the linear theory of spinodal decomposition proposed by Cahn, the phase diagram indicated that the gelation is attributed to the phase separation due to the concentration fluctuation of solution. Furthermore, in the later stage showing the deviation of the linear relationship, light scattering under Hv polarization condition showed a X-type pattern indicating the existence of optically anisotropic rods, the optical axes being parallel or perpendicular with respect to the rod axis. In spite of the existence of the rods, no crystallites were confirmed by the corresponding X-ray diffraction and DSC measurements. For κ-carrageenan solutions, the logarithm of scattered intensity against time showed a constant value. This indicated that the gelation of κ-carrageenan solutions is independent of liquid-liquid phase separation but is due to the rapid formation of cross-linking points. Accordingly it turns out that the small difference of chemical structure between agarose and κ-carrageenan causes quite different gelation mechanism.     

Potential bile acid metabolites. 24. An efficient synthesis of carboxyl-linked glucosides and their chemical properties

A facile and efficient synthesis of the carboxyl-linked glucosides of bile acids is described. Direct esterification of unprotected bile acids with 2,3,4,6-tetra-O-benzyl-d-glucopyranose in pyridine in the presence of 2-chloro-1,3,5-trinitrobenzene as a coupling agent afforded a mixture of the α- and β-anomers (ca. 1∶3) of the 1-O-acyl-d-glucoside benzyl ethers of bile acids, which was separated effectively on a C₁₈ reversedphase chromatography column (isolated yields of α- and β-anomers are 4–9% and 12–19%, respectively). Subsequent hydrogenolysis of the α- and β-acyl glucoside benzyl ethers on a 10% Pd−C catalyst in acetic acid/methanol/EtOAc (1∶2∶2, by vol) at 35°C under atmospheric pressure gave the corresponding free esters in good yields (79–89%). Chemical specificities such as facile hydrolysis and transesterification of the acyl glucosides in various solvents were also discussed.     

Dynamic hybridization of MILES and RANS for predicting airfoil stall

Hybridization comprised of an algebraic turbulence model based on the Reynolds average Navier-Stokes (RANS) equations with a monotonically integrated large eddy simulation (MILES) is proposed to simulate transient fluid motion during separation and vortex shedding at high Reynolds numbers. The proposed hybridization utilizes the Baldwin-Lomax model with the Degani-Schiff modification as the RANS model in the near-wall region and a MILES far from the wall. Although the hybridization is assumed to be a MILES with wall modeling, the transition line between the RANS and the MILES modes is determined by the turbulent intensity that is dominated by the large eddies in the grid-scale. This hybrid model is applied to the flows past three different types of airfoils (NACA63₃-018, NACA63₁-012 and NACA64A-006) near stall, at a chord Reynolds number of Re = 5.8 × 10⁶. These airfoils are classified as trailing-edge-stall, leading-edge-stall and thin-airfoil-stall airfoils, respectively. The computed results are compared with wind tunnel experiments. The hybrid model successfully demonstrates accurate stall angle and surface pressure distribution predictions near the stall for each type of airfoil. The airfoil simulation results confirmed that the hybrid model provides a better prediction than the RANS model for unsteady turbulent flows with separation and vortex shedding simulations.     

Observation of three-dimensional elemental distributions of a Si device using a 360 degrees -tilt FIB and the cold field-emission STEM system

A technique for preparation of a pillar-shaped specimen and its multidirectional observation using a combination of a scanning transmission electron microscope (STEM) and a focused ion beam (FIB) instrument has been developed. The system employs an FIB/STEM compatible holder with a specially designed tilt mechanism, which allows the specimen to be tilted through 360 degrees [T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, K. Umemura, K. Asayama, Microsc. Microanal. 9 (Suppl. 2) (2003) 118; T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, M. Watanabe, Microsc. Microanal. 10 (Suppl. 2) (2004) 1030]. This technique was applied to obtain the three-dimensional (3D) elemental distributions around a contact plug of a Si device used in a 90-nm technology. A specimen containing only one contact plug was prepared in the shape of a pillar with a diameter of 200nm and a length of 5mum. Elemental maps were obtained from the pillar specimen using a 200-kV cold-field emission gun (FEG) STEM model HD-2300C equipped with the EDAX genesis X-ray energy-dispersive spectrometry (XEDS) system through a spectrum imaging technique. In this study, elemental distributions of minor elements with weak signals were enhanced by applying principal component analysis (PCA), which is a superior technique to extract weak signals from a large dataset. The distributions of elements, especially the metallization component Ti and minor dopant As in this particular device, were successfully extracted by PCA. Finally, the 3D elemental distributions around the contact plug could be visualized by reconstruction from the tilt series of maps.     

高质量密度储氢材料-氨基化合物的合成

采用真空蒸发法制备了氨基化锂LiNH2(+2·LiH)薄膜,即首先将Li真空镀膜到金属基板上,然后经氮化、氢化处理合成LiNH2薄膜.此外,真空蒸发法也用于Mg部分置换Li后薄膜的制备.实验结果证明,与传统的粉末状试样相比,薄膜状试样能够在更低的温度下释放出氢气.研究表明采用包括真空蒸发法等非传统方法合成金属络合物储氢材料对进一步提高其储放氢特性具有良好的效果.     

Short communication: Temporal changes in the skin morphology of dairy cows during the periparturient period

Management of dairy cow productivity requires monitoring of their nutritional status by visual observation. It has been suggested that changes in hair coat appearance are among the indicators of nutritional state in dairy cows. Temporal changes in the skin morphology in cows, however, have not been reported. In this study, we examined the changes in the skin of dairy cows that occur during the peripartum period. Seven pluriparous cows were used. Skin samples were collected at 28 d before the due date and 28 d and 56 d after calving for morphological examination. Hair follicle width was 108.8 ± 5.9 µm (±SD) in the dry period, 95.5 ± 5.5 µm at 28 d after calving, and 104.2 ± 5.3 µm at 56 d postpartum. The percentages of anagen hair follicles during these 3 periods were 41.4 ± 3.4, 18.5 ± 3.4, and 32.3 ± 3.3%, respectively. The corresponding sebaceous gland sizes were 8,362.0 ± 707.6, 7,800.0 ± 831.4, and 9,186.8 ± 962.6 µm², respectively. Hair follicle width was positively correlated with percentage of anagen hair follicles. The thickness of epidermal and proliferation rate of epidermal cell were also correlated. However, the hair follicle width, sebaceous gland size and cell proliferation rate, and thickness and proliferation rate of epidermal cells did not show any marked changes.     

Evaluation of TEM samples of an Mg-Al alloy prepared using FIB milling at the operating voltages of 10 kV and 40 kV

Transmission electron microscopy (TEM) samples of an Mg-Al alloy has been prepared using a Ga-focused ion beam (FIB) milling at two different operating voltages of 10 kV and 40 kV to investigate the influence of the FIB energy on the sample quality. The fine structures of the samples have been studied using a high resolution TEM, and the concentration of the implanted Ga was analysed using an energy dispersive X-ray (EDX) analysis. The result of the TEM observation revealed that point defects were introduced to the sample finally milled at 40 kV but not at 10 kV. However, crystal lattice images and electron diffraction patterns were clearly observed on both the samples. The typical influence of the FIB energy was indicated in the elemental analysis. The relative Ga concentration in the thin sample finally milled at 10 kV was 1.0-2.0 at% that is less than half of 4.0-6.0 at% of the Ga concentration in the sample finally milled at 40 kV. A comparison between the experimental results of the Ga concentration measurement with simulation was also discussed.     

Preparation of SrBi 2 Ta 2 O 9 Thin Films by Liquid-Delivery MOCVD Without Additional Solvents

SrBi 2 Ta 2 O 9 thin films were prepared by ECR plasma enhanced metalorganic chemical vapor deposition (ECR-MOCVD) with a liquid-delivery system using one cocktail source without an additional solvent. The strontium-tantalum double alkoxide, Sr{Ta[OC 2 H 4 H(CH 3 ) 2 ](OC 2 H 5 ) 5 } 2 , was dissolved in stabilized trimethyl bismuth, Bi(CH 3 ) 3 / dioxane. This source system has been used in a conventional bubbling system. Deposition rate and the composition of the films were strictly controlled by the concentration and the composition of the cocktail source. Therefore, high reproducibility was realized by using this system. The constituent phase of the stoichiometric SBT film as-deposited at 500 C on a (111)Pt/TiO 2 /SiO 2 /Si substrate was a fluorite phase and transformed to the single phase of SBT by the post annealing at 800 C. It showed almost the same ferroelectricity as the stoichiometric composition film.     

Small break loch experiments and verification of CANAC-II code

Scaled experiments on small break, loss-of-coolant accidents have been conducted. The tests simulated loss-of-coolant accidents (LOCAs) resulting from a 0.53% and a 0.13% communicative break in the cold leg and the pressurizer power operated relief valve (PORV). The thermal-hydraulic behavior such as natural circulation and reflux condensation cooling during a small break LOCA has been investigated.

A new computer program CANAC-II (a Computer Analysis Program of Natural Circulation for multi-loop systems) has been developed and verified based upon comprehensive tests. A drift flux model was applied for two-phase flow in CANAC-II. It also has a shorter computer running time than the real time.     

Effect of gene disruption of succinate dehydrogenase on succinate production in a sake yeast strain

Succinate dehydrogenase (SDH) of Saccharomyces cerevisiae consists of four subunits encoded by the SDH1, SDH2, SDH3, and SDH4 genes. We determined the effect of SDH deficiency on the productivity of organic acids in a sake yeast strain Kyokai no. 9. The SDH activity of single disruptants was retained at 30-90% of that of the wild-type strain, but the activity disappeared in double disruptants of the SDH1 and SDH2 or SDH1b (the SDH1 homologue) genes. Two double disruptants showed no growth on a medium containing glycerol as the sole carbon source, while the single disruptants could utilize glycerol. These results indicate that double disruption of the SDH1 and SDH2 or SDH1b genes is required for complete loss of SDH activity and that the SDH1b gene compensates for the function of the SDH1 gene. The sdh1 sdh1b disruptant showed a marked increase in succinate productivity of up to 1.9-fold along with a decrease in malate productivity relative to the wild-type strains under shaking conditions. Under both static and sake brewing conditions, the productivity of these organic acids in the disruptants was virtually unchanged from that in the wild-type strain. Furthermore, SDH activity was undetectable in the wild-type and the disrupted strains under static conditions. These results suggest that SDH activity contributes to succinate production under shaking conditions, but not under static and sake brewing conditions.