Methane to higher hydrocarbons via halogenation

Activation of methane with a halogen followed by the metathesis of methyl halide is a novel route from methane to higher hydrocarbons or oxygenates. Thermodynamic analysis revealed that bromine is the most suitable halogen for this goal. Analysis of the published data on the reaction kinetics in a CSTR enabled us to judge on the effects of temperature, reactor residence time and the feed concentrations of bromine and methane to the conversion of methane and the selectivity towards mono or dibromomethane. The analysis indicated that high dibromomethane selectivity is attainable (over 90%) accompanied by high methane conversions. The metathesis of dibromomethane can provide an alternative route to the conversion of methane (natural gas) economically with smaller installations than the current syn-gas route.     

Radar cross-section study of cylindrical cavity-backed apertureswith outer or inner material coating: the case of H-polarization

A dual-series-based solution is obtained for the scattering of an H-polarized plane wave from a slitted infinite circular cylinder coated with absorbing material from inside or outside. For both cases, numerical results are presented for the radar cross section and comparisons are given for two different realistic absorbing materials. The radar cross-section dependencies are also given for the aspect angle of the scatterer and the thickness of the absorbing layer     

Fractionation of partially stereoregular poly(propylene oxide)

Partially stereoregular poly(propylene oxide) samples were synthesized via reactions catalysed by a preformed analytically defined trimethylaluminium hydrolysate. These samples were fractionated into two contrastingly different fractions.

1. (i) D-polymers: This fraction constituted the major part (up to 90%). It mainly contained cyclic low molecular weight oligomers (MW < 1000). The linear chains found in D-polymers had hydroxyl end groups. No double bonds could be detected spectroscopically.

2. (ii) K-polymers: This fraction was high molecular weight stereoregular polymer. Stepwise thermal precipitation from dilute isooctane solution of K-polymers yielded a succession of fractions which differed in melting point. It appears that the phase equilibria during the thermal precipitations were not controlled by the molecular weights of species.

Synthesis,characterization, and antitumor activity of poly(maleic anhydride‐co‐vinyl acetate‐co‐acrylic acid)

The ternary copolymerization of maleic anhydride (MA), vinyl acetate (VA), and acrylic acid (AA) [P(MA‐co‐VA‐co‐AA)], which is considered to be an acceptor–donor–acceptor system, was carried out in 1,4‐dioxane with benzoyl peroxide as an initiator at 70°C under a nitrogen atmosphere. Constants of complex formation for the monomer systems in the study were determined by UV–visible (hydrogen‐bonding complex) and ¹H‐NMR (charge transfer complex) methods, respectively. The results show that polymerization of the P(MA‐co‐VA‐co‐AA) system proceeds by an alternating terpolymerization mechanism. It is shown that the synthesized copolymers have typical polyelectrolyte behavior, ability for reversible hydrolysis–anhydrization reactions, and semicrystalline structures. In these cases, including radical polymerization, and formation of semicrystalline structures, the hydrogen‐bonding effect plays a significant role. The in vitro cytotoxicities of the synthesized terpolymer and alternating copolymer were evaluated using Raji cells (human Burkitt lymphoma cell line). The antitumor activities of prepared anion‐active copolymers were studied using methyl–thiazol–tetrazolium colorimetric assay and 50% of the cytotoxic dose of each copolymer and terpolymer were calculated. Hydrolyzed P(MA‐co‐VA‐co‐AA) and P(MA‐alt‐AA) copolymers have sufficiently high antitumor activity, which depends on the amount of hydrogen‐bonding carboxylic groups and their regular distribution in the side chain of functional macromolecules. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3425–3432, 2006     

High density polyethylene (HDPE): Experiments and modeling

The uniaxial tension (loading and unloading), creep and relaxation experiments on high density polyethylene (HDPE) have been carried out at room temperature. The stress–strain behavior of HDPE under different strain rates, creep (relaxation) behavior at different stress (strain) levels have been investigated. These experimental results are used to compare the simulation results of a unified state variable theory, viscoplasticity theory based on overstress (VBO) and a macro-mechanical constitutive model for elasto-viscoplastic deformation of polymeric materials developed by Boyce et al. (Polymer 41:2183–2201, 2000). It is observed that elasto-viscoplasticity model by Boyce et al. (Polymer 41:2183–2201, 2000) is not good enough to simulate stress–strain, creep and relaxation behaviors of HDPE. However, the aforementioned behaviors can be modeled quantitatively by using VBO model.     

A new technique for the calculation and 3D visualisation of magnetic complexities on solar satellite images

In this paper, we introduce two novel models for processing real-life satellite images to quantify and then visualise their magnetic structures in 3D. We believe this multidisciplinary work is a real convergence between image processing, 3D visualisation and solar physics. The first model aims to calculate the value of the magnetic complexity in active regions and the solar disk. A series of experiments are carried out using this model and a relationship has been indentified between the calculated magnetic complexity values and solar flare events. The second model aims to visualise the calculated magnetic complexities in 3D colour maps in order to identify the locations of eruptive regions on the Sun. Both models demonstrate promising results and they can be potentially used in the fields of solar imaging, space weather and solar flare prediction and forecasting.     

Reverse avalanche breakdown in gated diodes

A two dimensional study of reverse avalanche breakdown in high voltage gated diodes is presented. The numerical method uses the finite difference solution of Poisson's equation with appropriate boundary conditions. A modified two dimensional depletion region approximation is used to take into account the effects of accumulation and inversion near the insulator-semiconductor interface. It has been found that although the effects of surface states and accumulation on the breakdown is small, inversion changes the breakdown characteristics substantially. Breakdown voltage versus gate voltage curves are given for various geometries and doping properties. Good agreement has been achieved between the computed and experimental values of breakdown voltages for a large range of gate potentials.     

A review of gas engine driven heat pumps (GEHPs) for residential and industrial applications

This study reviews gas engine-driven heat pump (GEHP) systems for residential and industrial applications in terms of energetic and exergetic aspects for the first time to the best of the authors’ knowledge. These systems are novel heat pump systems (one of today's promising new technologies). Although the first investigations had been performed at late 1970s, the first merchandized GEHP was produced and introduced in the market in 1985. Gradually, it has become widespread all over the world for various purposes. Main application of GEHPs are for space and water heating/cooling purposes. However, they can be integrated to industrial applications, especially to drying processes.In this study, historical development of GEHP systems was briefly given first. Next, the operation of these systems was described, while studies conducted on them were reviewed and presented in tabulated forms. GEHPs were then modeled for performance evaluation purposes by using energy and exergy analysis methods. Finally, an illustrative example was given, while the results obtained were discussed. In addition, a new project on integration of GEHP systems to food drying processes in Turkey initiated by the authors was introduced. It is expected that this comprehensive study will be very beneficial to everyone involved or interested in the energetic and exergetic design, simulation, analysis and performance of assessment of GEHP systems.     

Determination of dielectric properties of corn seeds from 1 to 100 MHz

The dielectric properties of corn seeds were determined in the ranges of 9.71-21.51% wet basis (w.b.) for moisture content, 772.5-902.2 kg/m³ for bulk density and 1-100 MHz for frequency of applied electric field using a coaxial capacitor sample holder. Effects of the parameters such as moisture content, bulk density and frequency on the dielectric properties were investigated. The dielectric constant, loss factor and loss tangent were greatly affected by the moisture content, frequency and bulk density. The moisture content was the most significant factor affecting the dielectric properties of corn seeds. The dielectric constant, loss factor and loss tangent increased with increasing moisture content and bulk density. The second and third-order polynomial equations were proposed to describe the existing relationship between dielectric properties and moisture content. Dielectric measurements provided new information concerning moisture content and bulk density dependent behaviour of dielectric properties of corn seeds that may be useful in sensing of the moisture content.     

Environmental optimization of chromium recovery from tannery sludge using a life cycle assessment approach

Life cycle assessment (LCA) was used to evaluate the environmental impact of an oxidative chromium recovery method from tannery sludge, in comparison with the usual landfilling process. Three improvement options (water reduction, byproduct use and anaerobic sludge digestion) were considered. The results showed that the proposed chromium recovery process would be better environmentally than conventional landfilling in all the evaluated impact categories if the amount of chromium recovered was 43 kg per ton of sludge. This amount could be recovered if the chromium concentration was about 20 times higher than that considered in this study. Alternatively, a lower chromium concentration would produce a better result if the recovery method was optimized and implemented at industrial rather than laboratory scale, and if more accurate data were provided on environmental credits for avoiding the chromium production process. Thus, the recovery method is environmentally beneficial when tannery sludge contains a chromium concentration of about 100,000 ppm. According to the literature, such concentrations are not unusual. The results could serve as the basis for further environmental improvements in chromium recovery and tannery sludge management and should be used in decision-making processes, especially for end-of-pipe treatments.