Stability studies on methyl and ethyl fatty acid esters of sunflowerseed oil

Fatty acid esters, high in linoleic acid, were prepared and stored for long-term engine tests. Storage tests with these esters were undertaken to obtain more information on optimal storage requirements and general stability characteristics. Samples were kept at three temperature levels (20 C, 30 C and fluctuating around 50 C) for a 90-day period and were removed at regular intervals for chemical and physical analysis. The influence of air, temperature, light, TBHQ and contact with mild steel was evaluated by comparing the free fatty acid, peroxide, anisidine, ultraviolet absorption, viscosity and induction periods. A statistical model was used to evaluate the data and to reduce the large number of data points to comparable curves. Storage of esters in contact with air, especially at a temperature above 30 C, resulted in significant increases in peroxide, ultraviolet absorption, free fatty acid, viscosity and anisidine values. Exclusion of air retarded oxidation at all temperature levels. A direct relationship between viscosity increases and oxidation parameters was evident. Exposure to light caused a small increase in the oxidation parameters of esters stored at the highest temperature level. Addition of TBHQ prevented oxidation of samples stored under moderate conditions. Under unfavorable storage conditions the anti-oxidant was no longer effective. Mild steel had very little effect on the oxidation parameters. Only the anisidine values of samples stored at the highest temperature level were slightly increased. Methyl esters performed slightly better than ethyl esters during the storage test. The following practical guidelines for storage of fatty acid ester fuels are: (i) airtight containers should be used; (ii) the storage temperature should be <30 C; (iii) mild steel (rust free) containers may be used, and (iv) TBHQ has a beneficial effect on oxidation stability.     

Prevalence of gastrointestinal symptoms in obese and normal weight binge eaters

OBJECTIVES: Disturbances in gastrointestinal function may result from disordered eating and may lead to increases in gastrointestinal (GI) symptoms. We compared GI symptoms in obese and non-obese binge eaters and non-binge eaters. METHODS: One hundred nineteen obese and 77 normal-weight females completed a questionnaire on bowel symptoms and binge eating behaviors for the previous 3 months. Based on binge behaviors and body mass index (> 30 kg/m2), individuals were grouped as obese binge eaters (n = 73), obese non-binge eaters (n = 43), non-obese binge eaters (n = 14), and normal-weight controls (n = 61). RESULTS: Obese binge eaters reported more upper GI symptoms than normal controls or obese non-binge eaters (p < 0.001). Compared with normal controls, nausea, vomiting, and bloating was 2-4 times more prevalent in both binge eating groups. Indigestion was more prevalent in both obese groups. Obese binge eaters reported more lower GI symptoms than normal-weight controls (p < 0.05). Binge eating in both weight groups was associated with more frequent abdominal pain and dyschezia. Obesity was associated with more frequent constipation, diarrhea, straining, and flatus, whether or not subjects reported binge eating. Chi-square showed a significant association between obesity, binge eating, and symptoms of irritable bowel syndrome, using the Manning criteria. CONCLUSIONS: Specific GI symptoms were associated with binge eating and obesity. Overall, symptoms were more prevalent and more severe in obese binge eaters. The high prevalence of GI symptoms in obese patients who indulge in binge eating should be considered in their evaluation and treatment.     

Reconfigurable distributed storage for dynamic networks

This paper presents a new algorithm for implementing a reconfigurable distributed shared memory in an asynchronous dynamic network. The algorithm guarantees atomic consistency (linearizability) in all executions in the presence of arbitrary crash failures of the processing nodes, message delays, and message loss. The algorithm incorporates a classic quorum-based algorithm for read/write operations, and an optimized consensus protocol, based on Fast Paxos for reconfiguration, and achieves the design goals of: (i) allowing read and write operations to complete rapidly and (ii) providing long-term fault-tolerance through reconfiguration, a process that evolves the quorum configurations used by the read and write operations. The resulting algorithm tolerates dynamism. We formally prove our algorithm to be correct, we present its performance and compare it to existing reconfigurable memories, and we evaluate experimentally the cost of its reconfiguration mechanism.     

High-speed fluorescence detection of explosives-like vapors

In this paper, we report on the preparation of novel cross-reactive optical microsensors for high-speed detection of low-level explosives and explosives-like vapors. Porous silica microspheres with an incorporated environmentally sensitive fluorescent dye are employed in high-density sensor arrays to monitor fluorescence changes during nitroaromatic compound (NAC) vapor exposure. The porous silica-based sensor materials have good adsorption characteristics, high surface areas, and surface functionality to help maximize analyte-dye interactions. These interactions occur immediately upon vapor exposure, i.e., in less than 200 ms and are monitored with a high-speed charge-coupled device camera to produce characteristic and reproducible vapor response profiles for individual sensors within an array. Employing thousands of identical microsensors permits sensor responses to be combined, which significantly reduces sensor noise and enhances detection limits. Normalized response profiles for 1,3-dinitrobenzene (1,3-DNB) are independent of analyte concentration, analyte exposure time, or sensor age for an array of one sensor type. Explosives-like NACs such as 2,4-dinitrotoluene and DNB are detected at low part-per-billion levels in seconds. Sensor-analyte profiles of some sensor types are more sensitive to low-level NAC vapor even when in a higher organic vapor background. We show that single-element arrays permit the detection of low-level nitroaromatic compound vapors because of sensor-to-sensor reproducibility and signal averaging.     

Simultaneously monitoring gene expression kinetics and genetic noise in single cells by optical well arrays

An optical fiber based well array platform was used for simultaneous, dynamic gene expression monitoring from hundreds of individual live Escherichia coli cells carrying promoter-fluorescent reporter gene fusions. High information content about gene expression kinetics and cell-to-cell gene expression variability can be collected from a single experiment. These data are invaluable for investigating gene regulation and gene networks as well as for systems biology applications.     

Spatially resolved electrochemiluminescence on an array of electrode tips

An array of electrode tips with 6-microm center-to-center spacing, fabricated through chemical etching of an optical fiber bundle, and coated with gold, was used for initiating electrochemiluminescence (ECL) in an aqueous solution of Ru(bpy)3(2+) and tri-n-propylamine (TPrA). ECL generated at the tips of the electrodes in the array was detected with a CCD camera and exhibited both high sensitivity and high resolution. In the case in which the ECL signal could not be distinguished from the background, ECL signals could be obtained by pulsing the array and summing multiple CCD images. The behavior of this array was compared to a second array that consisted of individual electrodes insulated with an electrophoretic paint.     

A far-field-viewing sensor for making analytical measurements in remote locations.

We demonstrate a far-field-viewing GRINscope sensor for making analytical measurements in remote locations. The GRINscope was fabricated by permanently affixing a micro-Gradient index (GRIN) lens on the distal face of a 350-micron-diameter optical imaging fiber. The GRINscope can obtain both chemical and visual information. In one application, a thin, pH-sensitive polymer layer was immobilized on the distal end of the GRINscope. The ability of the GRINscope to visually image its far-field surroundings and concurrently detect pH changes in a flowing stream was demonstrated. In a different application, the GRINscope was used to image pH- and O2-sensitive particles on a remote substrate and simultaneously measure their fluorescence intensity in response to pH or pO2 changes.     

Developments in the engineering of refrigeration installations for cooling minesEvolution dans la conception des installations frigorifiques pour le refroidissement des mines

The need to reduce the electrical energy consumption associated with the cooling of mines has recieved considerable attention in recent years. Various methods for reducing the amount of cooling water circulated underground in mines has also been looked at. These requirements have led to several developments such as cooling of the ventilation air on surface, the use of energy recovery devices, refrigeration machines for producing water close to 0°C and currently consideration is being given to installing ice making machines on the surface. These developments and their field of application are analysed and discussed.