Strength,drying shrinkage,and water permeability of concrete incorporating ground palm oil fuel ash

In this study, palm oil fuel ash (POFA) was used as a pozzolanic material in concrete. The POFA was ground to obtain two different finenesses: coarse (CP) and fine (FP). A portion of ordinary type I Portland cement (OPC) was replaced by CP and FP at 10%, 20%, and 30% by weight of binder to cast concrete. Compressive strength, modulus of elasticity, drying shrinkage, and water permeability of concretes containing ground POFA were measured. The results showed that the compressive strength of the concrete increased with the fineness of the POFA. With 10% and 30% replacement of OPC by CP and FP, respectively, the compressive strength of the resulting concrete was as high as that of OPC concrete at 90 days. Moreover, the use of 10–30% of FP as a cement replacement in concrete reduced its drying shrinkage and water permeability. Finally, there was also a strong correlation between the compressive strength and the water permeability of ground POFA concrete.     

Hydrogen production from alcohol wastewater by an anaerobic sequencing batch reactor under thermophilic operation: Nitrogen and phosphorous uptakes and transformation

The objective of this study was to investigate hydrogen production from alcohol wastewater using an anaerobic sequencing batch reactor (ASBR) under thermophilic operation and at a constant pH of 5.5. Under the optimum COD loading rate of 68 kg/m³d, the produced gas contained 43% H₂ without methane and the system provided a hydrogen yield and specific hydrogen production rate of 130 ml H₂/g COD removed and 2100 ml H₂/l d, respectively, which were much higher than those obtained under the mesophilic operation. Under thermophilic operation, both nitrogen and phosphate uptakes were minimal at the optimum COD loading rate for hydrogen production and most nitrogen uptake was derived from organic nitrogen. Under the thermophilic operation for hydrogen production, the nutrient requirement in terms of COD:N:P was found to be 100:6:0.5, which was much higher than that for the methenogenic step for methane production under both thermophilic and mesophilic operations and for the acidogenic step for hydrogen production under mesophilic operation.     

Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete

The objective of this study is to investigate the use of ground palm oil fuel ash with high fineness (GPA) as a pozzolanic material to produce high-strength concrete. Samples were made by replacing Type I Portland cement with various proportions of GPA. Properties such as the compressive strength, drying shrinkage, water permeability, and sulfate resistance, were then investigated. After aging for 28 days, the compressive strengths of these concrete samples were found to be in the range of 59.5–64.3 MPa. At 90-day the compressive strength of concrete containing GPA 20% was as high as 70 MPa. The drying shrinkage and water permeability were lower than those of high-strength concrete made from Type I Portland cement. When the concrete samples were immersed in a 10% MgSO₄ solution for 180 days, the sulfate resistance in terms of the expansion and loss of compressive strength was improved. The results indicated that GPA is a reactive pozzolanic material and can be used as a supplementary cementitious material for producing high-strength concrete.