Stability enhancement of polypyrrole thin film ammonia sensor by camphor sulfonic acid dopant

Journal of Materials Science: Materials in Electronics - The main weakness of polymer gas sensors is its stability. Here, we report stability enhancement of a 100 nm polypyrrole (PPy) thin...     

An Approximate Model of Multistage Automatic Transfer Lines with Possible Scrapping Of Workpieces

We consider multistage automatic transfer lines with unreliable stages, finite interstage buffer storages, and possible scrapping of workpieces. It is assumed that the first stage never idles and the last stage never becomes blocked. Assuming that uptimes and downtimes of a stage are geometrically distributed, an approximate model is developed to compute different performance measures of the transfer line. The results obtained through the approximate model are compared to the exact results for three-stage transfer lines and to simulation results for longer transfer lines. It is observed that the approximate results are good in almost all cases considered.     

Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators

This paper presents the concept of a process signature for the use of online signature analysis and defect detection in the layered manufacturing (LM) of ceramic sensors and actuators. To achieve the high quality of parts built by the fused deposition of ceramics (FDC), an online process-monitoring system is implemented to detect the processing defects. Using a process signature extracted from the image of a layer captured by the monitoring system, an ideal image is created that is then compared to the original image to detect and identify the defects. Some results of signature analysis and defect detection for single-material and multi-material parts are also presented.Received: 22 July 1999, Accepted: 21 October 2001, Published online: 29 October 2003 Correspondence to: Mohsen A. JafariThis work was supported by the Office of Naval Research under grant # N-0014-96-1-1175. Ref. US Patent # S-5738817, April 14, 1998.     

Thermal modeling in cylindrical coordinates using effective conductivity

Predictive thermometry, utilizing minimally invasive sampling techniques, is an essential ingredient in the development of hyperthermia treatment planning capabilities. The authors demonstrate a powerful, but simple approach toward predicting temperature distributions in tissues, based on analytic solution, using in cylindrical symmetry, of the heat diffusion equation. Conduction and localized perfusion effects are combined as an effective conductivity term, readily measurable, and parametrized in a general exponential form. The proposed approach allows a first-order approximation to modeling three typical situations: hypoxic or necrotic tumor core with homogeneously perfused periphery; highly perfused periphery (in rapidly growing tumors); or perfused central cover with a less well-supplied periphery (such as for some invasive tumors). The utility and strength of this approach is that it provides a rapid, accurate model of directly observing the technical quality to be expected for different heating methods, making it possible to optimally configure source distributions in a treatment planning setting.     

Compatibilizing Effects on the Phase Morphology and Thermal Properties of Polymer Blends Based on PTT and m-LLDPE

Summary Morphology and thermal characteristics of poly (trimethylene terephthalate) (PTT)/ metallocene linear low-density polyethylene (m-LLDPE) blends with different amounts of a terpolymer based on glycidyl methacrylate (GMA), employed as a possible compatibilizer, were systematically examined. DMTA results show two distinct peaks for all neat blends associated with each phase. Melt crystallization degree of both phases in all the blends was observed to be reduced compared to pure components, except for that of PTT-rich phase in those blends with PTT as the matrix which slightly increases. Addition of the terpolymer to the system is found to effectively reduce the droplet size of the dispersed phase and increase phase adhesion. Also it increases the crystallinity of PTT in the system with PTT as the matrix. The influence of the compatibilizer is ascribed to the chemical interaction of PTT functional end groups with GMA functionalities. The efficiency of the terpolymer as a compatibilizer beyond 5 wt% content decreases which can be ascribed to the interface saturation and formation of micelles in the bulk phases.     

CFD simulation and evaluation of controllable parameters effect on thermomagnetic convection in ferrofluids using Taguchi technique

In the present attempt a CFD simulation capable of coupling behaviors from the nano-scale through the full-scale system in which a ferrofluid containing magnetite particles suspended in kerosene carrier liquid is presented. The main objective of the work was to simulate the thermodiffusion and also to evaluate the factors influence on this phenomenon in a cylindrical geometry. In simulations a two-phase mixture model was used to predict the behavior of the system. To optimize the thermomagnetic effect, different parameters including temperature difference across the layer, initial magnetic phase concentration, aspect ratio of the geometry, magnetic field magnitude and diameter of magnetic particles were examined using L₁₆ orthogonal array of Taguchi at four levels. Analysis of the simulation data indicate that the magnetic Soret effect can even be higher than the conventional one and its strength depends on the magnetic field strength, confirmed experimentally by Völker and Odenbach [Völker T, Odenbach S. Thermodiffusion in magnetic fluids. J Magn Magn Mater 2005;289:289-91]. The statistic evaluation shows that temperature and initial concentration of magnetic phase have the maximum and minimum contribution on the thermodiffusion, respectively. According to the results temperature difference 80 K, initial concentration of magnetic phase 0.08, aspect ratio 0.2, magnetic field strength 100 kA/m and magnetic particles diameter 100 nm were obtained as optimum conditions in the presence of natural convection. The same result was gained in the lack of natural convection except the magnetic field strength was 160 kA/m. Finally, based on the primary results, a verification test was also performed to confirm the validity of the used statistical method.     

Energy and load balancing routing protocol for IoT

Due to the limitation of node energy resources, the management of energy consumption is one of the most important problems of the internet of things (IoT). Therefore, many studies have tried to optimize and manage energy consumption by focusing on different techniques. Although each of these studies has improved and optimized energy consumption, there are many important problems, including maintaining traffic balance and energy consumption of network nodes. Therefore, a new method is necessary to maintain the load and energy balancing of network nodes. Therefore, this paper introduces energy and load balancing routing protocol for IoT (ELBRP) based on the development of the RPL routing protocol and the efficiency of data distribution technique. The ELBRP performance has three steps. In the first step, along with the process of sending DODAG information object (DIO) messages, the status of network nodes is evaluated. In the second step, the DODAG communication graph is formed according to the ELBRP. In the third step, data transmission is done according to the distribution technique with the goal of balancing traffic and energy. The simulation results using cooja simulator showed the superiority of ELBRP in improving energy consumption and successful delivery ratio, reducing delay and increasing the network lifetime compared to the similar methods.     

A Fuzzy Logic-Based Method for Replica Placement in the Peer to Peer Cloud Using an Optimization Algorithm

The Peer to Peer-Cloud (P2P-Cloud) is a suitable alternative to distributed cloud-based or peer-to-peer (P2P)-based content on a large scale. The P2P-Cloud is used in many applications such as IPTV, Video-On-Demand, and so on. In the P2P-Cloud network, overload is a common problem during overcrowds. If a node receives many requests simultaneously, the node may not be able to respond quickly to user requests, and this access latency in P2P-Cloud networks is a major problem for their users. The replication method in P2P-Cloud environments reduces the time to access and uses network bandwidth by making multiple data copies in diverse locations. The replication improves access to the information and increases the reliability of the system. The data replication's main problem is identifying the best possible placement of replica data nodes based on user requests for data access time and an NP-hard optimization problem. This paper proposes a new replica replacement to improve average access time and replica cost using fuzzy logic and Ant Colony Optimization algorithm. Ants can find the shortest path to discover the optimal node to place the duplicate file with the least access time latency. The fuzzy module evaluates the historical information of each node to analyze the pheromone value per iteration. The fuzzy membership function is also used to determine each node's degree based on the four characteristics. The simulation results showed that the access time and replica cost are improved compared to other replica replacement algorithms.

     

A new method for detecting various variants of GoF design patterns using conceptual signatures

Software design patterns are well-known solutions for solving commonly occurring problems in software design. Detecting design patterns used in the code can help to understand the structure and behavior of the software, evaluate the quality of the software, and trace important design decisions. To develop and maintain a software system, we need sufficient knowledge of design decisions and software implementation processes. However, the acquisition of knowledge related to design patterns used in complex software systems is a challenging, time-consuming, and costly task. Therefore, using a suitable method to detect the design patterns used in the code reduces software development and maintenance costs. In this paper, we proposed a new method based on conceptual signatures to improve the accuracy of design pattern detection. So we used the conceptual signatures based on the purpose of patterns to detect the patterns’ instances that conform to the standard structure of patterns, and cover more instances of patterns’ variants and implementation versions of the patterns and improve the accuracy of pattern detection. The proposed method is a specific process in two main phases. In the first phase, the conceptual signature and detection formula for each pattern is determined manually. Then in the second phase, each pattern in the code is detected in a semi-automatic process using the conceptual signature and pattern detection formula. To implement the proposed method, we focused on GoF design patterns and their variants. We evaluated the accuracy of our proposed method on five open-source projects, namely, Junit v3.7, JHotDraw v5.1, QuickUML 2001, JRefactory v2.6.24, and MapperXML v1.9.7. Also, we performed our experiments on a set of source codes containing the instances of GoF design patterns’ variants for a comprehensive and fair evaluation. The evaluation results indicate that the proposed method has improved the accuracy of design pattern detection in the code.

     

Theoretical analysis of shunting effect in resistance spot welding (RSW) of AA2219

Shunting effect is the loss of electrical current via the secondary circuit provided due to existence of previous nugget in a series of welding spots. This phenomenon is important for products containing intermittent spots. In this study, a theoretical model is developed for shunting effect in resistance spot welding for aluminum alloy 2219. Welding distance together with welding current and time is included in the model to analyze the shunting effect on final nugget quality. Thermal and electrical interactions are considered in the model as well as geometrical aspects of the process. Temperature dependence of material properties, integration through the whole volume of the nugget and heat-affected zone, and assuming a simple cooling mechanism are the most important modifications designated in the proposed theoretical model. Predicted results of nugget diameter are compatible with experimental and finite element analysis results.