Comparative study on the preparation and properties of radiation‐grafted polymer electrolyte membranes based on fluoropolymer films

In this study the fluoropolymers, poly(ethylene‐co‐tetrafluoroethylene) (ETFE) and poly(vinylidene fluoride) (PVDF) films, together with the radiation‐induced crosslinked polytetrafluoroethylene (cPTFE) film were compared on the basis of their preparation and properties of radiation‐grafted polymer electrolyte membranes. The polymer electrolyte membranes were prepared by radiation grafting of styrene into the base films and subsequent sulfonation. The proton conductivity and chemical stability of the three types of membranes with a similar ion exchange capacity (IEC) near 1.0 mmol/g were investigated and are discussed in detail. Although the ETFE‐based polymer electrolyte membrane was relatively more stable, its proton conductivity was lower than those of the PVDF‐ and cPTFE‐based membranes. On the other hand, the cPTFE‐based membrane showed a significantly higher proton conductivity, but its chemical stability was shorter than that of the ETFE‐based membrane. It is considered that the difference in the preparation and properties of the polymer electrolyte membranes was due to the difference in the degree of crystallinity as well as in the chemical structure of the fluoropolymer base films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1966–1972, 2007     

Uterine Deletion of Bmal1 Impairs Placental Vascularization and Induces Intrauterine Fetal Death in Mice

Recently, it was demonstrated that the expression of BMAL1 was decreased in the endometrium of women suffering from recurrent spontaneous abortion. To investigate the pathological roles of uterine clock genes during pregnancy, we produced conditional deletion of uterine Bmal1 (cKO) mice and found that cKO mice could receive embryo implantation but not sustain pregnancy. Gene ontology analysis of microarray suggested that uterine NK (uNK) cell function was suppressed in cKO mice. Histological examination revealed the poor formation of maternal vascular spaces in the placenta. In contrast to WT mice, uNK cells in the spongiotrophoblast layer, where maternal uNK cells are directly in contact with fetal trophoblast, hardly expressed an immunosuppressive NK marker, CD161, in cKO mice. By progesterone supplementation, pregnancy could be sustained until the end of pregnancy in some cKO mice. Although this treatment did not improve the structural abnormalities of the placenta, it recruited CD161-positive NK cells into the spongiotrophoblast layer in cKO mice. These findings indicate that the uterine clock system may be critical for pregnancy maintenance after embryo implantation.     

Artificial retina chips for image processing

Artificial retina chips which can simultaneously sense and process real world images are described. The comparison between artificial retinal systems and conventional image processing systems is described. Variable sensitivity photodetection, which is an essential technology for the artificial retina chips, is introduced in detail. The concept, structure, fundamental performance, operating principle, and processing functions for the fabricated artificial retinal chips are described. Applications including interactive games by gesture-input are also introduced. This work was presented, in part, at the International Symposium on Artificial Life and Robotics, Oita, Japan, February 18–20, 1996.     

Enhancement of etch rate for preparation of nano-sized ion-track membranes of poly(vinylidene fluoride): Effect of pretreatment and high-LET beam irradiation

We investigated how pretreatment and high-LET beam irradiation affected the ion-track dissolution rate in poly(vinylidene fluoride) (PVDF) films by SEM observations and conductometric analysis in order to develop the preparation methodology of nano-sized ion-track membranes. PVDF thin films irradiated with four types of ion beams were exposed to a 9 mol/dm³ KOH aqueous solution after their storage in air at 120 °C. This heating treatment was found to enhance the etch rate in the latent track, both in the inner core and outer halo regions, without changing that in the bulk, probably due to the formation of parasitic oxidation products facilitating the introduction of the etching agent to improve the etchability. Additionally, the irradiation of heavier higher-LET ions, causing each track to more activated sites (like radicals), was preferable for achieving effective etching.     

Thermally assisted recording of holographic gratings in semicrystalline azobenzene-containing polymers

We examine optically induced birefringence in semicrystalline azopolymer films that are held at glass-transition temperature Tg. The birefringence increases markedly after interception of the pump beam; the saturation value depends on exposure time. In addition, the induced birefringence is completely erased by irradiation with a circularly polarized beam at Tg. Using this thermally assisted method, we demonstrate the holographic recording of a test image. The intensity of the diffracted beam also increases after interception of the writing beams. Furthermore, the retrieved image is found to have a resolution of approximately 30 lp/mm. This resolution is comparable with that of the optical setup that is used. Accordingly, the thermally assisted recording by use of semicrystalline azopolymers is a promising method for reversible holographic storage.     

A Genetic Algorithm Approach to Solving Stochastic Job-shop Scheduling Problems

This paper proposes a method for solving stochastic job-shop scheduling problems based on a genetic algorithm. The genetic algorithm was expanded for stochastic programming. In this expansion, the fitness function is regarded as representing fluctuations that may occur under stochastic circumstances specified by the distribution functions of stochastic variables. In this study, the Roulette strategy is adopted for selecting the optimum solution in terms of the expected value. Within this algorithm, it is expected that the individual that appears most frequently must give the optimum solution. The effectiveness of this approach is confimed by applying it to stochastic job-shop scheduling problems. I compare the approximately optimum solutions found by this approach with the truly or approximately optimum solutions obtained by other conventional methods, and discuss the performance and effectiveness of this approach.     

Water mist formation in vapor-mist dielectrics and its effect

It has been proposed that vapor-mist dielectrics in which mixing liquid droplets such as tetrachloroethlene in a gas have the ability of increasing flashover, impulse voltage, and of suppressing partial discharge. Vapor-mist methods have been performed on other materials and the effect of the mist can also be obtained on benzene, hexane, and even water as general materials. Although these studies have been carried out, neither the discharge mechanism on vapor-mist nor the reason for the increase of the discharge voltage is understood fully because the mist is of various sizes. On the other hand, agglomeration of water molecules can be studied with the FR-IR method, and are classified into monomer, dimer, trimer (including polymer). Water gives mist stats which are significant in discussing effects. This paper describes states of water mist and their effect under nonuniform field with positive and negative polarities. Water mist in vapor exists as dimer and trimer, and their amount decreases with the reduction of temperature. These mists have no effect on discharge suppression. However, when the mists are formed by space charges, the inception voltage is increased by these mists in the negative polarity.     

IR and UV-visible spectroscopic studies of the adsorption of 3-fluorobenzoic acid on Au(1 1 1), Au(1 0 0) and Au(1 1 0) electrodes in neutral solution

3-Fluorobenzoic acid adsorbed on Au(1 1 1), Au(1 0 0) and Au(1 1 0) electrodes has been investigated using in situ IR reflection spectroscopy, UV-visible reflectivity measurements, and differential capacity measurements. As determined by IR reflection spectroscopy, the vertically adsorbed 3-fluorobenzoate is the predominant species at positive potentials, and the flat-lying type is adsorbed at negative potentials. In the UV-visible reflectivity measurements, the reflectivity changes for the vertically adsorbed and flat-lying 3-fluorobenzoates on the Au(1 0 0) electrode were observed at different frequency regions. No UV-visible reflectivity signal was observed for the Au(1 1 0) electrode, and it was proved that the UV-visible reflectivity change has a strong single crystal surface dependence. For the vertical configuration, a large contribution between the 5d orbital of Au and the 2p orbital of oxygen in 3-fluorobenzoate was found for the cluster model by DFT calculation.     

Site‐Selective Iron(III) Chloride‐Catalyzed Arylation of 4‐Aryl‐4‐methoxy‐2,5‐cyclohexadienones for the Synthesis of Polyarylated Phenols

The iron(III) chloride‐catalyzed Friedel–Crafts arylation of 4‐aryl‐4‐methoxy‐2,5‐cyclohexadienones, which were easily prepared by the phenyliodine(III) diacetate (PIDA)‐mediated oxidation of 4‐arylphenols in methanol, proceeded site‐selectively to form meta‐terphenyl (2,4‐diarylphenol) derivatives in good yields. The subsequent PIDA‐mediated oxidation and iron(III) chloride‐catalyzed Friedel–Crafts arylation of the resulting products gave the corresponding 2,4,6‐triarylphenol derivatives. The present method provides useful highly substituted polyarylated compounds.

     

Two types of vertically adsorbed 3-pyridinecarboxylate on Au(1 1 1), Au(1 0 0) and Au(1 1 0) electrodes

3-Pyridinecarboxylic acid (3-PC) adsorbed on low index face electrodes in NaF solution were investigated using in situ Fourier transform-infrared (FTIR) spectroscopy and differential capacity measurements. Two types of vertically adsorbed 3-PC were confirmed on the electrodes, while flat-lying adsorbed species were not observed at the potentials measured. At negative potentials, 3-PC molecules adsorb vertically on the electrode via the lone pair electrons of the pyridine ring nitrogen atom, and at positive potentials, 3-PC adsorbs vertically via the two oxygen atoms of the carboxyl group.