Thermal response in thermal energy storage material around heat transfer tubes: effect of additives on heat transfer rates

The effects of carbon-fiber chips and carbon brushes as additives on the thermal conductivity enhancement of phase change materials (PCMs) using in latent heat thermal energy storage are investigated experimentally and numerically by considering the wall effect of the additives. The carbon-fiber chips are effective for improving the heat transfer rate in PCMs. However, the thermal resistance near the heat transfer surface is higher than that for the carbon brushes. As a result, the overall heat transfer rate for the fiber chips is lower than that for the carbon brushes. Consequently, the carbon brushes are superior to the fiber chips for the thermal conductivity enhancement under the present experimental conditions. The carbon brushes are moreover applied to the packed beds of particles to overcome their low thermal conductivity in chemical heat pump/storage. The carbon brushes essentially improve the heat transfer characteristics in the packed beds, though the thermal resistance is observed because the particles obstruct contact between the fibers and the heat transfer surfaces.     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

Micro-computerized tomographic observation of the spinning apparatus in Bombyx mori silkworms

Silkworms and spiders have evolved complex spinning apparatus thought to use highly controlled conditions to optimize protein folding and crystallization to provide a tough fiber. Accordingly, the structure and function of the natural spinning apparatus has been studied with great attention as an interesting piece of biological engineering with potential for mimicry in an industrial process. However it is still not well understood. Here we used Micro-Computerized Tomographic equipment (mCT) to visualize the three-dimensional structure of the spinning apparatus in Bombyx mori silkworms. Multidirectional tomograms obtained by X-ray radioscopy provided valuable information on the detailed arrangement of each muscle of the silk press. It is suggested that the duct in the silk press part plays a part as an extrusion die whose cross-sectional area can be controlled by muscles to optimize applied stresses in the partially gelled silk within its lumen.     

Accelerator Analysis of Tributyltin Adsorbed onto the Surface of a Tributyltin Resistant Marine Pseudoalteromonas sp. Cell

Tributyltin (TBT) released into seawater from ship hulls is a stable marine pollutant and obviously remains in marine environments. We isolated a TBT resistant marine Pseudoalteromonas sp. TBT1 from sediment of a ship’s ballast water. The isolate (10^{9.3 ± 0.2} colony-forming units mL⁻¹) adsorbed TBT in proportion to the concentrations of TBTCl externally added up to 3 mM, where the number of TBT adsorbed by a single cell was estimated to be 10^8.2. The value was reduced to about one-fifth when the lysozyme-treated cells were used. The surface of ethanol treated cells became rough, but the capacity of TBT adsorption was the same as that for native cells. These results indicate that the function of the cell surface, rather than that structure, plays an important role to the adsorption of TBT. The adsorption state of TBT seems to be multi-layer when the number of more than 10^6.8 TBT molecules is adsorbed by a single cell.     

Computational study of unsteady viscous flow around a transversely and longitudinally oscillating circular cylinder in a uniform flow at high reynolls numbers

A finite difference simulation method for the time dependent viscous incompressible flow around a transversely and longitudinally oscillating circular cylinder at Reynolds numbers of Re=4×10³ and 4×10⁴ is presented. The Navier-Stokes equations in finite difference form are solved on a moving grid system, based on a time dependent coordinate transformation. Solution of the vortex street development behind the cylinder is obtained when the cylinder remains stationary and also when it is oscillating. Time eholution of the flow configuration is studied by means of stream lines, pressure contours and vorticity contours. The computer results predict the lock-in phenomenon which occurs when the oscillation frequency is close to the vortex shedding frequency in the transverse mode or around double the vortex shedding frequency in the longitudinal mode. The time dependent lift and drag coefficients are obtained by the integration of the pressure and shear forces around the body. The drag, lift and the displacement relations are also discussed.     

Preparation and photoconduction of rapidly quenched films in the Bi2O3-TiO2 system

The rapidly quenched films in the Bi₂O₃-TiO₂ system (0 to 60% TiO₂) were prepared using a twin-roller type apparatus. The films precipitated Bi₂O₃ solid solutions of different types in the composition ranges, with TiO₂ contents of 0 to 5, 7.5 to 10 and 12.5 to 40%, respectively. The first solid solution had a tetragonal structure of -form. The second, though also crystallized in the tetragonal structure, adopted a disordered modification of the -form. The third solid solution was -form (defect fluorite structure). The formation of amorphous phase commenced in the composition with 30% TiO₂, and the films became completely amorphous beyond 50% TiO₂. The quenched films showed a certain instability to decompose or transform into the different phase assemblage by annealing at higher temperatures (about 400 to 500° C, except 260° C for the pure Bi₂O₃ film). The quenched films were also characterized by a high photoconductivity. The photoconduction mechanism was suggested to be associated with a structural imperfection of Bi₂O₃ accompanied by a certain amount of pentavalent bismuth ion.     

Different support effect of M/ZrO2 and M/CeO2 (M = Pd and Pt) catalysts on CO adsorption: A periodic density functional study

CO adsorption over Pd₄ and Pt₄ cluster supported by c-ZrO₂(1 1 1) and CeO₂(1 1 1) catalyst systems was investigated using periodic density functional method in order to clarify the support effect on CO activation. We found that the support increases the CO activation for bridge and three-fold sites but decreases for the atop site. Moreover, it was found that the support changes the site preference for the CO adsorption. Bridge site on both the Pt₄/c-ZrO₂ and Pt₄/CeO₂ show larger CO adsorption energies than those on the other sites while the atop site is energetically preferable on isolated Pt₄ cluster. c-ZrO₂ supported Pd shows the largest CO activation with large charge transfer from the catalyst to the CO molecule. This reveals that ZrO₂ supported Pd can be a good catalyst for CO activation because of its higher probability to the three-fold site CO adsorption. We also found that positively charged M₄ clusters on the support keep their strong electron-donating properties and have enough charge density to contribute to the activation of an adsorbed CO molecule by a charge transfer.