Microstructure and Sliding Wear Behaviour of Ni(Cr)-TiB_2 Coatings Deposited by HVOF Spraying of SHS Powders

THERMAL SPRAYING provides a large range ofcoatings,which increase the wear resistance ofsubstrates[1].One of the major coating families is thecermet,composed of hard ceramic particles with ametallic binder.The most commonly used cermetcoatings in industrial applications are based on eitherthe WC-Co or the Cr3C2-Ni(Cr)systems with WC-17wt%Co and Cr3C2-25wt%Ni(Cr)being typicalcompositions[2,3].Although WC-Co deposits are hardand wear resistant at ambient temperatures their rangeof ap…     

An analytical procedure for dynamic response determination of a viscoelastic beam with moderately large deflection using first-order shear deformation theory

In this article, the dynamic response of a viscoelastic beam with moderately large deflection subjected to transverse and axial loads is studied using the first-order shear deformation theory. The von-Karman strain displacement relations and Hooke's law are used for formulation. The solution of the equations, which are a system of nonlinear partial differential equations, are obtained analytically using the perturbation technique in conjunction with the eigenfunction expansion method. The results are compared with the finite elements method. Also, a sensitivity analysis is performed, and the effects of geometrical and material properties are investigated on the response.     

Estimating parameters with pre-specified accuracies in distributed parameter systems using optimal experiment design

Estimation of physical parameters in dynamical systems driven by linear partial differential equations is an important problem. In this paper, we introduce the least costly experiment design framework for these systems. It enables parameter estimation with an accuracy that is specified by the experimenter prior to the identification experiment, while at the same time minimising the cost of the experiment. We show how to adapt the classical framework for these systems and take into account scaling and stability issues. We also introduce a progressive subdivision algorithm that further generalises the experiment design framework in the sense that it returns the lowest cost by finding the optimal input signal, and optimal sensor and actuator locations. Our methodology is then applied to a relevant problem in heat transfer studies: estimation of conductivity and diffusivity parameters in front-face experiments. We find good correspondence between numerical and theoretical results.     

Fabrication and characterization of highly efficient three component CuBTC/graphene oxide/PSF membrane for gas separation application

Metal organic frameworks (MOFs) with marvelous properties have aroused enormous attention for different application especially gas adsorption and separation. In this regard, fabrication of MOF hybrids with carbon based materials is new strategy to upgrade MOF performance. In this study CuBTC (Copper benzene-1,3,5-tricarboxylic acid)/graphene oxide (GO) composite was synthesized and characterized by BET, SEM, TGA, XRD and FT-IR techniques. Then CuBTC and CuBTC/GO composite were incorporated into polysulfone (PSF) polymer to construct mixed matrix membranes (MMMs). The obtained membranes were characterized by SEM, TGA, XRD and tensile tests and their gas permeability was measured. The results were compared to those of CuBTC/PSF MMMs. It was revealed that CuBTC/GO composite as filler showed superior performance relative to CuBTC. For instance, 15 wt% loading of CuBTC/GO in PSF represented outstanding gas separation behavior while the same loading of CuBTC in PSF deteriorated performance of MMM. Well particle dispersion and favorable polymer-filler interaction were responsible for such observed difference. A high H₂/CH₄ and H₂/N₂ selectivity of 80.03 and 70.46 were recorded for CuBTC/GO in PSF (15 wt%) compared to 44.56 and 40.92 for CuBTC in PSF (15 wt%).     

Microscopic details of asphaltenes aggregation onset during waterflooding

We report detailed microscopic studies of asphaltenes aggregation onset during waterflooding of petroleum reservoirs. To achieve this objective, a series of simulations are performed on asphaltenic-oil miscibilized with water at high pressure and temperature through molecular dynamics. Results of this simulation onset are applicable to asphaltenes behavior in real crude oils. Our simulation results illustrate that the aggregation onset in waterflooding generally follows three sequential steps: (i) Asphaltene-water interaction; (ii) Water bridging; (iii) Face-to-face stacking. Then, asphaltene-water and water-water hydrogen-bonding network surround every aggregate boosting the intensity of aggregation onset. We intend to utilize such understanding of these details in our predictive and preventive measures of arterial blockage in oil reservoirs during waterflooding.     

Mesoporous silica coated gold nanorods: a multifunctional theranostic platform for radiotherapy and X-ray imaging

Journal of Porous Materials - The development of theranostic nanostructures is one of the most advanced branches of pharmaceutical and medical sciences in the world today. Due to the unique...     

Removal of Diazinon from aqueous solution by electrocoagulation process using aluminum electrodes

Electrocoagulation (EC) is an electrochemical method to treat polluted wastewaters and aqueous solutions. In this paper, the removal of Diazinon was studied by EC on aluminum electrode. The effect of several parameters such as initial concentration of Diazinon, current density, solution conductivity, effect of pH, and electrolysis time were investigated on EC performance. The obtained results showed that the removal efficiency of EC depends on the current density, initial concentration of Diazinon and electrolysis time. The optimum pH is 3 and also the solution conductivity has no significant effect on removal efficiency.     

Designing a nuclear battery based on the Mo-99 radioactive source soluble in water and aqua regia in order to use in early tests

Today, millions of electrocommunication, electric, medical, and industrial devices use battery. Batteries with long life and high energy density seem to be essential in medical, military, oil and mining, aerospace areas as well as conditions in which access is difficult and in situations where replacement or recharging of battery is costly.In this regard, the use of radiation energy resulting from radioactive materials and its conversion to electric energy can be effective in making batteries. In the present study,various Mo-99 radioisotope values with a half-life of 65.98 h were used as a soluble radioactive source in two materials of water and aqua regia. Then, by comparing the results of the Monte Carlo simulations program MCNPX for these two solutions, it was found that when the water is used instead of aqua regia(for idealization), the values of the superficial current of electrons, the volumetric flux of electrons, and the deposited energy in the volume containing the radioactive solution increased by 10.80, 4.10,and 13.80%, respectively. Also, the short-circuit current and energy conversion efficiency of this battery with a concentration of 0.01 molar, Mo-99 dissolved in the aqua regia are 0.79μA and 16.47%, respectively.     

Determination of Polycyclic Aromatic Hydrocarbons (PAHs) in Olive and Refined Pomace Olive Oils with Modified Low Temperature and Ultrasound-Assisted Liquid–Liquid Extraction Method Followed by the HPLC/FLD

The cleanup method of modified low temperature was compared with the standardized method of modified ultrasound-assisted liquid–liquid (UALL) extraction for the analysis of 15 polycyclic aromatic hydrocarbons (PAHs) in olive oil and refined pomace olive oil. The modified UALL extraction consisted in purification on C₁₈ reversed-phase, Florisil-bonded-phase and NH₂ cartridges, and modified low-temperature extraction was followed by alumina-N and NH₂ solid-phase extraction (SPE) cartridges. Both methods are followed by reversed-phase high-performance liquid chromatography with fluorescence detection. The chromatograms of the final extracts showed lower interferences in both of the methods. The solvent consumption and cost for the modified UALL method were higher than those of the modified low temperature, and also, it needed more equipment, but its analysis time was less. The limit of detection and limit of quantitation of the modified UALL method were 0.16–0.97 and 0.57–2.93 μg kg^?1, respectively, and for the modified low temperature, they were 0.09–1.97 and 0.29–5.99 μg kg^?1, respectively. The PAH recoveries for the modified UALL extraction method ranged from 75.0 to 111.0 % (RSD?=?3–8 %), and for the modified low temperature, they ranged from 81.5 to 113.8 % (RSD?=?3–10 %).     

Inter-particle heat transfer in a riser of gas-solid turbulent flows

Effects of the particle-particle heat transfer in a gas-solid turbulent flow in a riser were evaluated. An Eulerian/Lagrangian four-way interaction formulation including the particle collisions in conjunction with the k − τ and the k_θ − τ_θ model equations were used in the numerical simulation. Inter-particles and particle-wall interactions were accounted for with an inelastic collision model, where the restitution coefficient was evaluated for each collision. The special case when the flow initially contains two groups of hot and cold particles was treated in details. Particular attention was given to the nature of heat transfer to particles due to inter-particle interactions. The results showed that the effect of particle-particle heat transfer was more significant for smaller sizes, lower flow Reynolds numbers, and for higher loading ratios. Solid thermal properties, however, did not have a noticeable effect on the inter-particle heat transfer. The simulation results indicates that although the heat transferred to each group of hot and cold particles was significant, the mean values of gas and particle temperatures and suspension heat transfer was insensitive to the inter-particle heat transfer.