加氢泵筒体部件加工工艺研究

加氢进料泵是筒形多级泵,一般达10级左右,用于输送石油化工介质。工作温度较高,工作压力在30多兆帕,筒体一般采用锻钢件,吸入法兰多为铸件,吐出法兰为锻钢件,与筒体拼接组焊。结构较复杂,承受的压力也较高。合理安排粗车,半精车,精车及镗,钻工序,以及必要的热处理,和渗透检验工序,是保证零件精度,产品运转性能,和使用寿命的必要手段。本论文以TD460-190X9为例从原材料入厂,到装配试验,出厂制定了一套详细的工艺及检验方案。改进了加工及打压方案,增加了必要的检验工序,既保证了加工精度,又提高了效率。同时也保证了产品的质量。     

Spin Dependent Hopping in Ti Doped La0.67 Ca0.33 MnO3

A systematic investigation of the magnetic and transport properties of Ti doped La0.67Ca0.33MnO3 was reported. The Ti substitution for Mn ions results in a reduction in ferromagnetism and conductivity. The metal-insulator transition temperature is close to Curie temperature which decreases from 274 to 82 K as x increases from 0 to 0.17. The most important effect of Ti doping is to introduce spin clusters in the samples due to the distortion of local lattice and the inhomogeneous magnetic structure induced primarily by the random distribution of Mn ions. A maximum magnetoresistance ratio as large as 90% in 1 T at 122 K was obtained for the sample with x =0. 055, which is four times larger than that obtained for LCMO sample at 272 K. There is a remarkable field-history dependent MR in the cooling process for the doped samples while such phenomenon disappears in the warming run. The resistivity follows well the variable range hopping behavior in paramagnetic state. Both the size effect and spin dependent hopping of carriers between the spin clusters should be considered in this system.     

钢筋混凝土受弯构件全约束优化设计

本文根据结构优化问题的特点，运用Ｋｕｈｕ－Ｔｕｃｋｅｒ最佳性条件，给出了满足现行ＧＢＪ１０－８９《混凝土结构设计规范》规定的钢筋混凝土受弯构件全约束优化设计方法。     

MOS控制晶闸管的三重扩散工艺研究

本文对ＭＣＴ的核心工艺－三重扩散工艺进行了详细研究。通过ＳＵＰＲＥＭ－Ⅲ计算机工艺仿真，获得了三重扩散的工艺条件。     

吹风气回收装置运行总结

山西丰喜肥业（集团）股份有限公司临猗分公司合成氨一分厂建于2001年，造气采用固定床间歇气化技术，原料为阳泉洗中块煤。造气车间现有9台φ2650气化炉，配套D700型风机2台，D600风机1台，正常生产时9台炉全部满负荷生产，日产氨醇560t。     

影院建筑声学标准与测量(下)

2.声场分布及声缺陷的测量: 在影院及其它厅堂中,为使观(听)众区内任意位置都能清楚地听到对白、语言、音乐、动效等内容,故声场分布的均匀性也极为重要。 在相关标准中规定“在观众区内各测试点间声压级的最大值与最小值之差不大于6dB,最大值与平均值之差不大于3dB。”     

管好油库扭紧供应链条

中国油品市场的竞争将进入一个白势化的时期。参加这场角逐的各个竞争主体都在思考这祥一个问题:如何优化自己的成品油销售供应链,在竞争中发展并壮大自己。