CARBON ORDERING IN Fe-1.83C MARTENSITE Ⅰ. Crystal Structure of a Conventional Ordered Phase

采用电子衍射方法对Ｆｅ－１．８３Ｃ马氏体室温时效时产生的有序相结构进行研究，确定其结构为偏离化学计量成分Ｆｅ_４Ｃ的γ′－Ｆｅ_４结构，称为γ′－Ｆｅ_ｘＣ（Ⅰ）（ｘ＝４－１１）。碳原子位于单胞的１／２，１／２，１／２位置。该有序相单胞尺寸为：（ａ_Ｍ，ｃ_Ｍ分别为马氏体单胞的ａ和ｃ轴长度），它与母相完全共格，位向关系为（００１）_Ⅰ∥（００１）_Ｍ，［１００］_Ⅰ∥［１１０］_Ｍ。根据γ′－Ｆｅ_ｘＣ（Ⅰ）晶体结构计算出的有序相衍射花样与实验得到的衍射花样全部吻合。     

Spontaneous emission from a three-level atom placed in three-dimensional photonic crystals in the long-time limit

The paper describes the spontaneous emission from a three-level atom placed in a periodic dielectric microstructure which exhibits a complete three-dimensional photonic band gap. By using the Euler approach, the upper level population of the atom is calculated for a wide range of relationships between the Rabi frequency and the detuning of the atomic transition frequency from the upper band edge. The results indicate that there are three cases of the relationship between Rabi frequency and detuning, which determine distinctive states of the atomic population in the long-time limit. When the detuning is greater than the Rabi frequency, the upper level has a zero steady-state atomic population, which leads to enhancement of spontaneous emission. When the magnitude of the detuning is less than the Rabi frequency, the upper level has a nonzero steady-state atomic population, which leads to suppression of spontaneous emission. When the negative detuning is greater than the Rabi frequency, the upper level has a nondecaying oscillatory-state atomic population due to long-time atomic splitting. These three properties of the spontaneous emission are relevant to several optical devices on an atomic scale, such as optical memories, switches and clocks.     

Input-output linearization of nonlinear systems with time delays in state variables

The present paper is concerned with nonlinear systems that contain delays inside coupled with a part of state variables, which are often the cases in practical problems, but have not been treated yet. First we introduce an extension of the Lie derivative for a difference-differential equation; then we derive necessary and sufficient conditions for existence of a nonlinear feedback that linearizes the input-output behaviour of a system and decouples it from the delayed variables simultaneously. Discussions are given for two cases: firstly when the linearizing feedback contains only current values of state variables, and secondly when the linearizing feedback has memories to utilize the past values as well as the current values of state variables.     

EFFECT OF HIGH PRESSURE ON THE ACCUMULATION OF IMP AND ON THE STABILITY OF AMP DEAMINASE IN RABBIT SKELETAL MUSCLE

This study evaluated the effect of high pressure on rabbit skeletal muscle, specifically on the production of inosinic acid (IMP), one of “umami” components, and on the activity of adenosine triphosphate (AMP) deaminase, which plays a role in the conversion of AMP to IMP. By increasing the pressure (0.1 to 300 MPa), nucleotide analysis showed that IMP content in muscle increased instantly with a concomitant decrease in ATP content. The IMP content of muscle at 300 MPa was approximately 15% higher than with lower pressures (0.1–200 MPa) when stored for 1 week at 4C after pressurization. These results suggested that the metabolism of nucleotides in muscle was not significantly impaired by pressure treatment. At 300 MPa, AMP deaminase maintained approximately 70% of the activity at 0.1 MPa. In contrast, the activity of purified AMP deaminase was completely lost at 200 MPa, and irreversible conformational changes were observed by in situ fluorescence spectroscopy. These results indicated that purified AMP deaminase was irreversibly denatured under pressure as high as 300–400 MPa.     

KINETICS OF BIOETHANOL PRODUCTION FROM WHEAT MILLING BY-PRODUCTS

An overview of the potential application of wheat milling by‐products as substrate for bioethanol production is presented. In order to select a suitable microorganism, model fermentations were conducted using glucose and dry baker's yeast. The overall ethanol yield was nearly stable (ca. 0.35 g/g), independent of mash glucose concentration; mashes with 100 g glucose/L resulted in an overall ethanol productivity of 3.48 g/L·h. Slurries containing low‐grade wheat flour (LG) (100, 200 or 300 g/L) were used for simultaneous saccharification and fermentation (SSF) with Zymomonas mobilis. Fermentation performance was evaluated based on ethanol concentration (P), productivity (Q_v), yield (Y_P/S), production rate (Q_p) and glucose consumption rate (Q_s). Mashes containing 200 g LG/L produced about 52 g ethanol/L, with Q_vof 2.17 g/L·h. Based on the relatively high fermentation rate of LG, reaching peak ethanol productivity within ca. 9 h of SSF, considerable savings on fermentation time was achieved. Using Z. mobilis for LG fermentation, P was about 30% higher than that obtained with Saccharomyces cerevisiae.     

Comparison of Transparent Gels with Turbid Gels Prepared from Egg White: Creep Analysis of Gels

Egg white from which the precipitate occurring during dialysis against water had been removed gave a transparent gel on heating at lower salt concentrations and pH 3.54. The addition of NaCl or a shift of pH from 3.54 to 4.50 brought about the turbid gels. Creep analyses of these transparent and turbid gels were done using a four-element mechanical model. The instantaneous elastic modulus, E₀, Newtonian modulus, ηn and retarded viscoelastic moduli, E₁ and η₁ increased with NaCl up to 125 mM and then decreased with increase in NaCl concentration at pH 3.54. At 125 mM NaCl and pH 3.54, a translucent gel was obtained. E₀ and η₁ decreased with the temperature of the gel, while E₁ and η₁did not change depending of temperature.     

Synthesis of bismuth-based high-Tc superconducting fibres by using sodium alginate as a polyelectrolyte

The thermal pyrolysis processes and solid-state reactions in the synthesis of bismuth-based high-Tc superconducting fibre obtained by using sodium alginates are studied. This alginate is a polyelectrolyte and has not only an excellent ion-exchange property but also a gelation to synthesize long fibrous precursors. We first determined the optimum conditions to promote ion-exchange of this polyelectrolyte which yields high contents of metal ions in the precursor. The thermal pyrolysis of a precursor was studied by DTA and IR absorption. On the basis of the DTA and XRD, the solid-state reactions associated with the formation of the 2 2 1 2 phase were revealed. Our method can be applied easily to synthesize Ag-sheathed fibre having an improved tensile strength. This revised version was published online in November 2006 with corrections to the Cover Date.     

覆盖网络测试探析

基于分布式哈希表DHT（Distributed Hash Table）的P2P理论结构和算法研究的主要困难在于难以在实际网络中进行性能测试。OpenDHT是一个全球性的覆盖网（Overlay network），能够提供一个具体的实验平台，通过响应客户端请求实现一个真正的DHT．以完成覆盖网络测试。